How much does an electric cylinder generally cost? How many types of electric cylinders are there?

Different brands of electric cylinders** vary greatly.

1. The thrust of the German servo electric cylinder is about 300kg, and the starting price is 10,000 yuan.

2. If the thrust of the European and American servo electric cylinders is about 300kg, the starting price is 40,000 yuan.

3. Domestic high-end, such as Tianyu servo electric cylinder about 300ky, the starting price starts at 6800 yuan.

4. Domestic low-end, such as a certain treasure, or a certain degree of bidding, the starting price starts at 2000 yuan.

An electric cylinder is a common industrial device used to achieve linear motion. Its** varies based on a variety of factors, including model, power, quality, and brand, among others. According to market research, the first range of electric cylinders is roughly between a few hundred yuan and thousands of yuan.

First of all, the type and power of the electric cylinder is one of the main factors of the difference. Different models and powers of electric cylinders require different material and technical costs, so ** will also vary. In general, higher power electric cylinders** are comparatively higher.

Secondly, the quality of the electric cylinder will also have an impact on the **. High-quality electric cylinders are usually manufactured with high-quality materials and advanced technology, so ** is relatively high. The low-quality electric cylinder may have problems such as unstable performance and short life, and ** is relatively low.

In addition, the brand is also an important factor influencing the electric cylinder**. Well-known brands usually have a high level of credibility and quality assurance, so their products** are relatively high. And some unknown or low-profile brands may be relatively low.

To sum up, the range of electric cylinders is wider, generally between a few hundred yuan and thousands of yuan. When buying an electric cylinder, you should choose the right model, power, quality and brand according to your needs and budget. At the same time, it is also necessary to pay attention to choosing a reliable supplier to ensure the performance and quality of the product.

When buying an electric cylinder, you generally look at the load, speed and accuracy you want. It can be equipped with DC, AC and servo motors. According to the different internal materials, the ** is not the same, the better ones are basically thousands, and most manufacturers can be customized according to individual needs.

Servo electric cylinder ** depends on how big the bore you need to know how much money and the stroke also needs to know how much, Shanghai Ruikui's electric cylinder general servo electric cylinder ** has more than 100 to more than 1,000. Its internal structure is: planetary roller screw, roller screw, trapezoidal screw, anti-reversing device, etc. Hope!

Common electric cylinders are classified as follows:

1. Linear type: The linear electric cylinder uses a coupling to directly connect the motor and the screw rod in the cylinder.

In series, the motor of the electric cylinder is installed on the same axis as the spindle of the screw rod. The structure of the whole cylinder block is compact, which reduces the gap between the cylinder block and the motor, and the performance and accuracy of control have been improved.

2. Switchback draft: through the synchronous belt.

It is driven by synchronous pulleys to realize the parallel connection of the motor and the screw rod, and the motor and the cylinder block are in a parallel relationship. It is suitable for places with small installation space, and has high control and control accuracy.

3. Vertical: The key pants motor passes through the corner reducer or worm gear.

The deceleration mechanism and the transmission screw rod are adjacent, and the axis of the motor and the axis of the screw rod are perpendicular to each other. The short overall length is also suitable for installation where space is limited.

From the perspective of the installation method of the motor, the electric cylinder can generally be divided into two types: one is the direct-connected electric steel, and the other is the switchback electric cylinder.

The direct-connected electric cylinder is the electric machine installed at the tail end of the electric cylinder block and connected by a coupling. The central axis of the motor and the central axis of the electric cylinder block are in a straight line. The motor can directly drive the screw rod to do a linear motion back and forth.

The foldback electric cylinder is installed in parallel between the motor and the electric cylinder block, and the two are connected in parallel. The motor and the electric cylinder block are connected by a synchronous belt synchronous wheel. When working, the motor drives the synchronous belt synchronous wheel to rotate, thereby driving the screw rod to work in a straight line back and forth.

Direct-coupled electric cylinder, folding electric cylinder.

Servo electric cylinder is a kind of electric linear actuator with high precision, due to its high precision and no impact, many mechanical equipment have begun to choose servo electric cylinder. Many users who use servo electric cylinders for the first time are very concerned about the life of servo electric cylinders, so let's take a look at the service life of servo electric cylinders.

The service life of the servo electric cylinder actually refers to the service life of the screw inside the servo electric cylinder.

The service life of the screw can be mainly affected by two reasons, one is the fatigue life of the screw rod, and the other is that the service life of the screw depends on other conditions.

The fatigue life of the screw is calculated by calculating other conditions that affect the service life of the screw rod such as temperature, dust, the type of parsley used to lubricate the screw and the frequency of regular rebuke additions.

Under normal circumstances, there is no problem for servo electric cylinders to work for 20,000 hours, and several matters should be paid attention to in the daily use of servo electric cylinders, which can also effectively extend the service life of servo electric cylinders. Because the servo-electric cylinder is a high-precision product, it is forbidden to hit it with a hammer during use.

When the servo electric cylinder works for a long time, it needs to add lubricating oil once, which can be limited to 24-3 months of working 24 hours a day.

In addition, the servo-electric cylinder is used with the motor, so the driver of the servo motor needs to pay attention to ventilation and heat dissipation when used for a long time to avoid burning out.

Under normal circumstances, the service life of servo electric cylinders is 20,000 hours. However, if the use environment of the servo electric cylinder is very harsh, the service life of the electric cylinder will be shorter than that of the conventional environment.

The life of the electric cylinder can be recognized as the Shouzhou filial piety of the screw inside the electric cylinder. For the life of the screw rod, it can be viewed from two aspects, one is the fatigue life of the screw rod, and the other is other conditions. The fatigue life of the screw rod generally depends on the number of times it runs to grip the congratulatory, but also depends on the total time of the electric cylinder.

Other conditions that affect the service life of the screw rod include: temperature, dust, type of lubrication used and frequency of regular addition, etc. If the electric cylinder is used normally, it can be used for more than 20,000 hours without human damage.

Hydraulic cylinders are compact, but given the footprint of the hydraulic power pack, the overall footprint of the electric cylinder system is often much smaller, allowing for a more compact and efficient machine design.

Lifetime - The life of the electric cylinder can be calculated by L10 and the dynamically rated crate of the crate load can be estimated, while the life of the hydraulic cylinder is extremely difficult**. **Calculating Total Cost of Ownership infographic. Electric cylinders allow users to better calculate and select actuators that meet their system life requirements.

Efficiency - Electric cylinder systems are typically in the 75-80% range, while hydraulic systems typically achieve around 40-55% efficiency.

Maintenance - Electric cylinders require very little maintenance, and hydraulic systems rely on seal integrity to achieve proper performance through the system. Due to wear, temperature, and other factors, seal integrity and performance will be reduced.

Temperature - With high and low temperature greases, the Minbei electric cylinder can operate in extreme temperatures with minimal impact on performance. I know that there is a Lianhua servo electric cylinder in Guangzhou with advanced technology, you can learn about it.

Leaks and Environmental Issues - Leaks in hydraulic systems are only a matter of time. Leaks can be a safety hazard and can also lead to a number of environmental problems.

Data Acquisition – The servo system used with the electric cylinder always provides position, speed and force torque data to the control system and provides better monitoring of the process.

The electric cylinder is a kind of equipment that converts the electrical energy of the missing branch into mechanical energy, and is often used in occasions that need to carry out reciprocating motion or reciprocating motion, such as industrial robots, automated production lines, industrial equipment, logistics transportation equipment, etc. The electric cylinder can realize the lifting, moving, and rotating movements of the workbench by controlling the speed and direction of the motor, so as to realize various automation functions. For example, in the field of industrial robots, electric cylinders can cooperate with robots to complete various work tasks, such as automatic loading and unloading, assembly, packaging, etc.; In the automated production line, the electric cylinder can be used to transmit materials, handle workpieces, etc.; In logistics conveying equipment, electric cylinders can be used for automatic sorting, automatic loading and unloading, etc.

In addition, electric cylinders can also be used in medical devices, laboratory equipment, robotics and other fields. For example, in the field of medical devices, electric cylinders can be used for surgical operations of surgical robots; In the field of laboratory equipment, electric cylinders can be used for the lifting and moving of various experimental instruments; In the field of robotics, electric cylinders can be used for the movement, operation and control of robots. In short, the electric cylinder has the advantages of small size, light weight, strong power, high precision and good reliability, and is widely used in various automation equipment to improve production efficiency and automation.

Ordinary electric cylinders replace pneumatic cylinders, hydraulic cylinders, green and environmentally friendly, will be the mainstream of linear motion; Servo electric cylinder replaces servo cylinder, servo hydraulic cylinder, realizes precise position control limb training code, and resistance in motion control, which will be a must for automatic control of robots. Limtech is the largest joint venture manufacturer in China.

Speaking ofElectric cylindersI believe you will not be unfamiliar, but many friends do not know a lot about the electric cylinder, and then the servo electric cylinder manufacturer Hefuyuan will explain the ...... of the electric cylinder from the name, principle, and use of the electric cylinder

Introduction to electric cylinders.

With the continuous improvement of automated production, electric cylinders have also come into being. The emergence of electric cylinders is a perfect replacement for the original hydraulic cylinders and pneumatic cylinders on the market. Electric cylinders can be said to be the best alternative to hydraulic cylinders and cylinders, and to achieve the advantages of more environmentally friendly, more energy-saving and cleaner environment, it is easy to connect with PLC and other control systems to achieve high-precision motion control.

Another name for an electric cylinder.

The English name of the electric cylinder is linear actuator, and many products, the electric cylinder also has many names, the industry will also be called servo electric cylinder, electric actuator, electric push rod, electric cylinder servo cylinder, electric cylinder, linear actuator, electric slide, linear slide, industrial mechanical arm, etc.

The structure of the electric cylinder.

The electric cylinder is a new type of electric actuator, which is mainly composed of a driving motor, a reduction gear, a screw, a nut, a guide sleeve, a push rod, a slide, a spring, a shell and a turbine, a micro control switch and other mechanisms, which can realize long-distance control and centralized control.

Features of electric cylinders:

The electric cylinder has many advantages such as reliable performance, sensitive action, smooth operation, the same push-pull force and good adaptability to the environment.

The principle of the electric cylinder.

An electric cylinder is an electric drive device that converts the rotary motion of an electric motor into a linear reciprocating motion of a push rod.

The principle of the electric cylinder is that after the motor is decelerated by the gear, it drives a pair of screw nuts to turn the rotary motion of the motor into linear motion, and completes the push rod action by using the forward and negative rotation of the motor, such as through various levers, rockers or connecting rods and other mechanisms to complete complex actions such as rotation and shaking, and can increase or increase the stroke by changing the length of the lever arm.

Application areas of electric cylinders.

The electric cylinder is a general-purpose auxiliary driving device, so the electric cylinder can be widely used in electric power, machinery, metallurgy, transportation, mining, petroleum, chemical industry, lifting, transportation, construction and grain and feed processing industries.

Electric cylinders are products designed for continuous movement, low to high loads (usually high speeds) and can be recycled multiple times over their lifetime. These products have extremely high positioning accuracy and controllability, enabling precise motion control at loads ranging from a few kilograms to 50 tons.

This question is a bit strange, the electric cylinder is related to the factors, and the <> electric cylinder factor is mainly in these aspects:

1.Motor, generally crack the electric cylinder such a sophisticated equipment will be equipped with servo electric brother and friend machine, although the ** is very high, the lowest cost performance is 2500+, ** is more transparent.

2.screw rods, bearings;

3.Machining parts (high customization cost and high precision);

4.Labor, logistics, taxes, etc.

5.Control part of the commissioning cost (generally by the professional dust shortage manufacturers to provide technical support, after-sales service).

6.Other.

The life of the electric cylinder can be calculated, but there is no formula to calculate, you must really calculate the electric cylinder, according to its quality, brand awareness, and application of special working conditions, such as a cylinder with a bore of 60, imported brands have reported more than 30,000 yuan, and the domestic brand Tianyu Dan Nian mold electric cylinder has reported 9,000 yuan, especially in Guangdong, there are **1500 yuan, **700 yuan, so a penny and a mold slow goods.