How can I get a message if the voice recorder has a noise? How to eliminate noise in the recording

There is noise in the voice recorder, under normal circumstances, you can remove the noise from the audio information in the current voice recorder settings, so that you can clean up the noise in the recording.

The length of the microphone in this situation is because of this one next to it. The battery is relatively large, or a long time is relatively large, so there will be this situation, so it should be okay to wait for a period of time before using it.

To remove the noise from the recording, do a better following:

1.Before recording, select the recording mode with high quality sound, and if the voice recorder has a noise cancellation function, select the noise reduction mode.

2.When recording, the recorder should be placed as close to the source as possible;

If there is a noise, it should be the volume next to it or this channel is too high, so this situation is caused by it, it is recommended that you clean it up for him, and then wait for a while before using it.

If there is a noise, how to message the word is generally a noise, I recommend buying a good voice recorder, because if there is a voice recorder, it is actually not very good, so there is noise.

It is still difficult to cancel the noise of the voice recorder, which is mainly the problem of the internal voice recorder, you can take the local professional who repairs the mobile phone to test and repair it.

If he is recording this thing, for example, if I have a noise, you should put him in a relatively quiet environment, such as some soft place, not on that hard object.

If there is noise in the voice recorder, it is likely that the internal circuit is short-circuited, and it is recommended that you disassemble it and then check it.

It's normal to have noises. When recording a voice recorder, it is often disturbed by the outside world, so it is recommended that you choose a silent environment for recording.

Hello, this situation indicates that it is a hardware problem, so you need to reflect it with the manufacturer.

The voice recorder has a noise, you should ask customer service if there is a problem in it, or is it a problem that comes with it?

Hello, if your voice recorder has noise, it is generally your recording environment that has a problem.

We will be happy to answer your <>

Hello, for the situation that there is noise in the recording, the following methods can be taken to eliminate it:1Adjust the recording device:

You can try adjusting the position or angle of the recording device to avoid external interference, as well as adjusting parameters such as the sensitivity and gain of the microphone to reduce noise. 2.Use noise reduction software:

You can use some noise reduction software, such as Audacity, Adobe Audition, etc., to import the recording file into the software, and remove the noise by adjusting the noise reduction effect parameters. 3.Be aware of the environment when recording:

When recording, you can choose a relatively amperometric and quiet environment, avoid noise or other noise as much as possible, and close the windows and doors before recording to reduce external noise. 4.Replacement of recording equipment:

If none of the above methods work, you can consider changing the recording device or using an external microphone to achieve better recording results. In short, the problem of noise in the recording can be eliminated by adjusting the recording equipment, using noise reduction software, paying attention to the environment, and replacing the recording equipment.

Summary. 1. Open the Audition software and drag the audio you want to process into the multi-track.

2. Double-click the waveform of the audio to enter the interface.

3. Select a small section with noise, (there can only be noise in the selected section, but not human voices), you can use the scroll wheel to amplify the interface waveform for fine operation.

4. Noise reducer.

5. Click "Get Characteristics" to appear the waveform, then click the waveform to select all, and adjust the parameter in the left box to 80 (it can be adjusted appropriately according to the noise level, the larger the parameter, the greater the processing intensity.) ）

6. Click OK.

Hello, this reason, in addition to the performance of the machine itself, there are other reasons, which can also be avoided.

How to improve the sound quality of the voice recorder 1, as close as possible to the speaker, although our recorder can be recorded at a distance of more than 7-8 meters, but the effect is not so good, if you do not pursue the sound quality, just to hear the text to record, 7-8 meters or more.

2. Pad with soft objects 3. Professional noise reduction If your requirements are higher, use professional audio software for software noise reduction after recording, after the noise reduction is completed, there is no noise at all in the clip without sound, which is blank, noise reduction has advantages and disadvantages, excessive noise reduction will reduce the overall sound quality, it is not important what recording equipment is used, and audio post-processing refers to the old Wu is the key.

How can you eliminate the noise.

You can use Audition software to eliminate noise.

How to operate on a voice recorder.

1. Open the audition soft bend and drag the audio that needs to be processed into the multi-track 2. Double-click the waveform of the audio to enter the interface 3. Select a small segment with noise, (there can only be noise in this selected section, and there can be no human voice), you can use the scroll wheel to enlarge the interface waveform for fine operation4. Noise decelerator. 5. Click "Get Characteristics" to appear the waveform, then click the waveform to select all, and adjust the parameter buried rock code in the left box to 80 (it can be adjusted appropriately according to the noise level, the larger the parameter, the greater the processing intensity.) 6. Click OK.

It can't be operated on the voice recorder, you need to use software.