The phone can t be turned on, how to use Qitu to flash the phone

If the phone can be inserted with a memory card.

Next, flash the memory card.

Go to recovery and re-flash.

If you can't insert a memory card.

Use the brick saving mode.

You can go into memory.

If you can enter recovery, flash the machine; You can't just "save bricks".

Enter Recovery Mode Method:

Method 1: If the phone is turned on, please turn it off first, remove the battery and then install it, and press and hold the power button at the same time when the phone is turned off.

Home button until the Recovery screen appears.

Method 2: If the above methods cannot be entered, then turn on the computer again, first press and hold the volume + button, and then press and hold the power power button until the recovery interface appears.

Recovery flash (power button to confirm, volume up and down keys to move), the steps are as follows:

Flash the ROM from the corresponding mobile phone on the Internet, and then copy it to the root directory of the SD card, the ROM is in ZIP format (you can open it to verify it, the ZIP package must have meta-inf This folder is the flash package, but do not change the files in the ZIP package), do not unzip. After the copy is complete, you can disconnect the phone and the computer.

Shut down the computer completely (it is best to pick the battery after shutting down), and then enter the recovery interface through the special button combination.

Selected. wipe

data/factory

reset, press the power button to confirm, and then press yes with the selected yes; Then select Clean

CachePartition is OK, and yes is selected. (This is the legendary double wipe, friends who know about flashing must have heard of it.) )

Select install

zipfrom

sdcard

Press the power button to confirm, and then select again.

choose

zipfrom

SDCARD press the power button to confirm, then select the rom flash file, press the power button to confirm, and then select yes and press the power button to confirm to start flashing.

After brushing, that is, the interface after the progress bar is finished, return to the main interface of recovery. In this case, select reboot

system

Press the power button to restart the phone. The first reboot takes a long time, so be patient! This is the end of flashing.

No. Can't turn on the debugging, can't flash the machine with one click.

What phone, see if it can enter recovery mode.

It can't be said that there are a lot of flashing software.

Qitu flashing: one-click flashing of mobile phones: a more complete flashing process, making flashing more convenient, safe and fast.

Phone root: Root your phone, one click to remove the restriction of your phone.

ROM market: 100,000 mobile phone ROMs to choose from, what system you like.

Official Pure Pack: Activate the official Pure Pack adaptation to create a clean and easy-to-use system.

Save Brick Repair: Use Save Brick Repair to save your phone.

WiFi Fix: Fix your phone can't use XP system wifi hotspot.

3 .Flashing wizard is also a very good flashing tool, and it also supports the mobile terminal of the mobile phone to flash the intelligent installation driver.

Say goodbye to cumbersome operations and flash your computer with just a few clicks of the mouse.

The flashing solution is delivered in the cloud, which is safe and reliable.

One-click backup and restore system to reduce the risk of flashing.

Digital security engine scanning, security engine scanning, source elimination of viruses and rogue software wizard-style interactive interface, easy to use.

Intelligent identification of models, one-click root

No, there are a lot of flashing software, and I personally feel that the brush master is very good!

Qitu flashing machine is very good, and there are many flashing packages.

No, rabbit itools are generally used

Hello,It is recommended to use the line brush treasure brush tool to re-brush Oh,One-click closed song intelligent flashing,And the compatibility of the ROM package is also high。 First**client,Then try to use the line brush treasure flashing tool to solve this problem,No need for any complex operation,Follow the operation prompts of the Zaizai client,Connect the mobile phone to achieve flashing! Problems such as mobile phone system upgrades, downgrades, system failures, mobile phone black screens, and system streamlining can be solved.

Hello, 1.Make sure your phone is charged. When charging your phone, the charging indicator will flash, keep it charged and wait for a while before trying to turn it on.

If the phone can also back up the information, remember to back it up immediately, it is recommended that the important information should be backed up by SD or other means).

2.If the phone is stuck and does not respond, you can press and hold the power button for 10s to force restart. See if you can recover.

5.Turn off the phone, and then press and hold the volume plus + volume down + power buttons at the same time, the phone will perform the operation of forcibly reflashing the firmware, and it will automatically turn on when it is finished.

Or turn off your phone, and then press and hold your power (also known as power button) and volume up button (the one that turns up the sound) for 10s at the same time, and enter the recovery interface after about a minute or two, and select factory reset.

Thank you and Happy New Year.

Finish. 、On this issue,If you don't use the computer ** software,Then you have to go to the mobile phone repair shop,Ask a professional master to help you flash the machine,That's fine,The reason is that they have a lot of flashing versions there,Generally, you can flash the machine successfully。

What should I do if I forget the password to unlock the graphics of my Android phone? Choose from any of the three unlocking methods.

Forgetting the mobile phone unlock password and graphic password has become a common problem for engine oilers. At the same time, many users are helpless for most of the password forgiveness, here the author provides three solutions for you to delete the forgotten lock screen password, there is always a suitable one for you!

Unlock method 1: Flash the phone.

Re-enter the ROM. You can know that you can set the password lock elimination,This method may be a little complicated for friends who can't flash the phone,If you can flash the phone, it's much simpler.。

Unlock method 2: Dual wipe

Double Wipe is also known as Double W. From the professional perspective of flashing enthusiasts, it can be understood that it can be recognized and erased as an operation to erase mobile phone data. The more professional answer to the question of what does wipe mean is:

Wipe means to restore factory settings, including contacts, text messages, installed software, etc. Commonly known as hard boot, restore factory settings. Note:

After WIPE, app2sd and root privileges need to be redone. And the important partitioning steps of app2SD have to be redone. Dual Wipe is Dual Wipe refers to clear cache and memory data.

Understand the meaning of wipe, which should know about Shuangqing. Now that you have restored your phone to factory settings, the password lock you have set will naturally be erased. It's relatively easy to do, but it can have an impact if you have important files on your phone.

Unlock Method 3: Use ADB to delete the forgotten lock screen password.

1. Connect the mobile phone to the computer, do not turn on the data connection, and proceed in charging mode.

2After unzipping on the computer, put the ADB file in the root directory of the C drive of the computer.

3. Perform the operation in the figure and delete *key file.

4. Enter adb reboot or manually restart the phone to take effect.