Excuse me,How to connect Konka LCD TV to wireless network

1. The wireless connection needs to be matched: the wireless router, computer, network TV 2, the wireless router and the computer can be connected to the network normally, and set the encryption parameters of the router. 3. The router adopts WPA encryption mode, and the settings are as follows:

Set the password type to TKIP, select psk for PSK EAP, and set 8 digits for the password. (The password is recommended to use pure numbers, easy to identify) 4, TV: Settings - Network - Wireless Settings - SSID (search for router equipment), encryption type (the same as set on the computer), IP type selection is automatically obtained, and finally click on the setting 5, if it is a built-in WiFi function, Settings - Network - Wireless Settings, turn on WiFi, select the name of your router, there will be a dialog box popping up, prompting you to fill in the password, please use Konka remote control Keyboard and mouse to enter the input.

After entering, click Connect and then click Network Detection. If the TV prompts that the network has been restored and the network is connected, it means that the TV has been successfully connected to the Internet! The use of hidden wireless routes is not supported, and it is recommended to set the router to open; Konka enterprise knows that to provide you with high-quality solutions, attentive to answer your questions, hope to be able to get you.

Wired connection: Connect the network cable from the router to the network port on the rear panel of the TV. Open the network settings for the Digs Grip. After the IP address is automatically obtained, the network will be connected to the scattered sail gong.

To set up your TV's Wi-Fi, follow these steps:

1. Press the "Menu" button of the TV remote control to find the "System" option.

2. Find "Network Settings" in the system menu and click to enter.

3. Click "WiFi Switch" to open, as shown in the figure below, to enter the wireless connection settings;

4. After clicking "Open", many wireless network names will appear in the "Hail Wireless WiFi Network" page, find your own wireless network, and then click to enter.

5. Enter the correct password of the wireless route to open the wireless network;

6. Successfully connected to the wireless network.

1. Turn on the TV, use the remote control to operate the Dongzao TV, and enter the "System Settings".

2. Under the interface of system settings, select "Network Settings Collapse" on the left, click on the right to appear the detailed interface of network settings, and select "Wired Settings" to enter.

Indicates that the TV has been successfully connected to the network. At this point, the TV set is connected to the broadband network.

4、Users can exit the settings and return to network TV。

1. Turn on the TV, operate the TV with the remote control, and enter "System Settings".

2. Under the interface of system settings, select "Network Settings" on the left, click on the right side to appear the detailed interface of network settings, select "Wired Settings" and click to enter.

3. After entering the wired setting, Naimu clicks "Wired: Automatically obtain IP", and the TV can detect the network signal and obtain the IP address; Indicates that the TV has been successfully connected to the network. At this point, the television set is connected to the broadband network.