How can Konka wireless network TV upgraded

The general method of Konka wireless network TV upgrade:

1. Turn on the TV, operate it with the remote control of the TV, and enter the [Settings] interface of the TV;

2. Find [System Settings], select and click [System Upgrade] after entering;

3、After clicking, the system will be connected to the network to check whether there is a current [system update package]Yes**,If there is an update package,The system will be connected to the network to update the package** to the local TV and automatically install the update package for upgrading;

4. After the upgrade is completed, the TV will prompt [Upgrade Successful] and automatically restart;

5. The TV can be used normally after restarting.

WPA encryption method,The password type is selected as TKIP,PSK EAP is selected as PSK,The password needs to be set to 8 digits (the password is recommended to use the number 0-9 TV is easy to identify)。 After the settings are completed, select the wireless settings of the TV, enter the password, and automatically obtain the IP address, and the connection is successful.

If the TV does not have a built-in wifi function, it needs to be equipped with a wireless network card, and the TV has requirements for the wireless network card chip model, and the detailed model of the machine can be provided to contact us.

First, press the signal input button with the remote control of Konka TV spine, select the ignited cable TV HDMI project to confirm and exit, and then use the remote control of the machine family dry top box to press the TV button, and select the Zhaoye Dong Line TV program. However, the output of the set-top box should be connected to the TV and registered for approval first.

Summary. Hello dear, 1Turn on the TV 2

To operate the TV remote control, press the "Menu" button once3The screen of the TV will pop up the settings page of the menu4At this time, tap it consecutively5Click5Click"Replay"Button,You can open Konka TV's system settings mode menu。

I just bought a Konka TV,How do I enter the system settings?

Hello dear, 1Turn on the TV 2To operate the TV remote control, press the "Menu" button once3

The screen of the TV will pop up the settings page of the menu4At this time, tap it consecutively5Click5Click"Replay"Button,You can open Konka TV's system settings mode menu。

Konka TV's system setting mode entry and exit operation method:1、Entry method:Start the TV,Operate the TV remote control,Press once"Menu"Key,The screen of the TV will pop up the menu setting page。

At this time, tap it consecutively5Click5Click"Replay"Button,You can open Konka TV's system settings mode menu。 2. Exit method:Just click the "replay" button of the remote control after the system setting is completed, and you can exit and return to the normal TV screen.

There are two kinds of Konka TV connection networks: wired connection; Wireless connection (wifi) two connection methods,The general Konka LCD TV can take these two connection methods to connect to the computer,Watch programs。

Wired connection mode;

1.There is a wired network interface behind Konka TV,There is also a network interface on the top of the router,Connect the two network interfaces with wires,Wired connection plugs a section of the network cable into the routerLNoport,The other end is plugged in the network port on the back of the TV。

2.Then turn on the TV, find the wired connection icon in the upper right corner of the screen, tap this sign to connect the TV to the Internet.

Wireless Connection: 1The wireless connection of the Konka TV requires the TV to be turned on. Turn on the TV, find the network in the settings, and click on the network - Wi-Fi.

2.Select the wifi you want to connect, generally the wifi sent by your router, remember the name of the wifi sent by your router, select the corresponding wifi here, and enter the corresponding password, and finally click to connect.

3.Like the lower fluid peel number chart, it shows that the connection is successful, pay attention to the connected after the wifi name, if it is not connected, you have to check the router.