psp3000 connects to the computer and PSP3000 how to use WI FI to access the Internet

In the Device Manager, you will find this hardware indicator that has been connected but cannot be recognized, if you have an XP system installation disk on hand, click Update Driver, and then put the disc into the optical drive, and install it. This trick is tried!

RemoteJoy, PSP Desktop Plug-in, PC Desktop Software and Drivers.

This type of software and tutorials are available on the video game bus.

You can check out this software.

It's still easy to use.

1. Turn on the wireless WLAN on the top of the PSP3000. Make sure the WLAN switch is turned on.

2. Then on the PSP system settings menu, enter the network settings.

3. After confirming the input, select "Basic Mode".

4. If you have set it up before, you can directly connect the connection that has been set. If not, select Create a new connection

5. Make sure the wireless network has been set up, then click "Detect", and the PSP will automatically detect the current WiFi network.

6. In the detected network, find the SSID of the wireless network, which is the name of the wireless routing setting. Select the appropriate wireless network, and then select.

7. Then, you can modify the SSID of the network, which refers to the SSID displayed in the PSP. It can freely enter or keep the original router settings.

8. Select the network encryption mode, you can see the encryption mode in step 6. You can then make the corresponding selection.

9. The IP address is set to simple mode. If you set the route to restrict IP addresses to Custom, set the IP addresses according to the rules that restrict IP addresses.

10. Enter the SSID name and password of the network you want to connect to.

11. Then confirm the method and name of the connection, and then confirm again.

12. Save the settings, and then connect automatically by selecting the SSID.

13. In this way, the PSP can access the internet, and the radio in the lower left corner turns on and turns green.

Tools Raw materials.

Wi-Fi environment: Wireless routing or hotspot wifi are OK

Method steps.

1. Turn on the wireless WLAN switch on the top of the PSP3000. Make sure that the WLAN switch is turned on.

2. Then in the system "Settings" menu of the PSP, go to "Network Settings".

3. After confirming the entry, select "Basic Mode".

4. If it has been set before, you can directly connect to the connection that has been set. If not, select Create a new connection

5. Make sure the wireless network is set up, then click "Detect", PSP will automatically detect the current WiFi network.

In Figure 6, find the SSID of your wireless network in the detected network, which is the name of your wireless routing settings.

Select the appropriate wireless network, and then select Yes.

7. Then you can modify the SSID of the network, which refers to the SSID displayed in the PSP. You can enter freely, or you can keep the original router settings.

8. Select the encryption method of the network, and you can see the encryption method in step 6. Then select accordingly.

9. The IP address is set to simple mode, if it is a route that restricts IP, it is set to customized, and the IP address is set according to the rules of restricting IP.

10. Enter the name of the SSID you need to connect to and the password of the network.

11. Then confirm the connection method and name and confirm again.

12. Save the settings, and it will be automatically connected as long as you select the SSID in the future.

13, so that the PSP can go online, and the wireless in the lower left corner is turned on and turns green.

Steps to find online:

Turn on the Wi-Fi switch of the WLAN at the top of the PSP and nudge it to the right.

2.Go to the PSP system menu and select "Network Settings".

3.For home or office users using wireless routing, select Basic Mode and press to enter.

4.Select Create a new connection to proceed to the next step.

5.By default, "Detect" is selected, and the PSP will automatically detect the wireless signal in the environment.

6.If there is a wireless signal in the environment, the PSP will appear with a list of available access points. Select the access point, confirm.

7.In this case, the PSP prompts the user to enter the SSID of the access point, that is, the access password. If the hotspot does not have an SSID set, just right-click Next.

8.For wireless LAN security settings, select the encryption method of the hotspot. By default, there is no encryption.

In most cases, the encryption of wireless router is set to WEP or WPA-PSK (TKIP) mode. If you don't know how your wireless routes are encrypted, you can consult your network administrator.

If you have the permission to set routes, go to the route settings management page and find the encryption method of the route.

9.Set an IP address. Just use the "Easy" mode. For routes that have IP access restrictions set, use the Custom option to set the IP address to match the routing rules.

10.Enter a connection name.

11.After the settings are completed, a list of all settings will appear, after confirming that everything is correct, right-click to enter the next step, and press Save All Settings.

12.Once saved, perform a connection test. After the connection is successful, a success list appears, showing the current connection status. Press to return afterward. At this point, the wifi setting is complete, and the next step will be how to access the Internet.

13.Select PSP "Network" - "Internet Browser".

15.A list of network connections will appear, select the connection name we just set.

Hello,Open the settings to create a new connection,Then search for cmcc,Open a web page that will let you enter the account password,Log in successfully after entering,,Remember that this web page is not closed,Open a new tab to browse the web OK。 Small P can only have 3 tabs, so remember it.

Do you have a wireless router at home? Basically, it's the same as connecting your computer to the Internet, select the network connection to create a new user, and choose to automatically see if you can receive the router? If you can't receive the router, change it manually, the IP address is the same as your computer's, just change the first one, and don't move the others.

PSP connection to wifi

Go to System Settings --- Network Settings --- Create Ad-Hoc to find the name of the wireless network you created.

Note: PSPs cannot be directly connected to public signals such as ChinaNet. It must be a hotspot such as an AP or router that you have set up yourself.

Turn on the wifi switch above, and then go to the host settings to turn on the wifi connection and find the wifi connection.

After the PSP is turned on the wifi, there is a network D option, press the automatic search on the line.

Put the memory stick into the PSP, then connect the PSP to the computer with a data cable, select the removable disk mode on the PSP, and you can see that it is connected.

Included cable. Then there's an option to connect to the host.

Install a driver wizard.

Then update the computer driver and you're done.

Well,Try this.,Plug in the computer first.,Click to connect.,After the computer recognizes it (there is no disk at this time),Click to disconnect.,Don't pull the line.,Then reconnect again.,There you have it.,My 3K is sometimes like this.。