There was no battery all day, saying that the phone was out of battery and disappeared for a day

It's true that life is like this now, no electricity will indeed bring a lot of inconvenience, if you notice that there is no electricity, you can prepare in advance It will be better, if there is no electricity suddenly, it is really annoying.

Based on your description, it is advisable to verify on your own whether it is a one-area or one-home outage. If it is a power outage, it is recommended to entrust a qualified electrician to verify whether the fault point belongs to the user's property or the power supply's property rights. If there is a power outage (power supply line failure), you can call 95598 power supply service** to report, and someone will follow up with you to deal with the power outage.

We hope you find ours helpful.

No electricity, no wifi, Internet access can only rely on traffic, traffic is not enough!

Others, it can be overcome, but it is also troublesome: TV, computer, fan, 、......Which one doesn't need electricity! The worst thing is that my mother's house is on the same street as us, and there was a power outage that day, and the idea of going to my mother's house for refuge was shattered.

So I planned to wake up today and go out as a family, just for the weekend, a family trip to the suburbs. But the tragic things continue to happen! The baby suddenly had a low-grade fever last night, that is, she could only stay at home, and she had to keep pouring warm water to fight the fever.

Last night, there were two large pots of hot water missing, and the thermos flasks were there. Wait for it to cool in boiling water, then mix it with hot water to make warm water and drink. The phone and power bank are fully charged!

It's so boring, playing with the baby, the brain is empty. I can't do anything......

There may be several reasons for household electricity to have electricity and no electricity for a while: poor contact of air switch: you can check whether the air switch is in poor contact, you can clean it with cleaning agent, and wipe it with white vinegar or alcohol, pay attention to the air switch do not enter the water, if the water enters the water needs to be replaced with a new one.

Poor circuit board contact: It is necessary to check whether the socket in your home has poor contact, and you can replace it with a new circuit board. Damaged wires:

If you need to check whether the wires at home are damaged, you can ask professional personnel to come to the door for maintenance. Electrical failure: If the electrical appliances in the home fail, it will also cause the home to have power and no power for a while.

If these problems occur, it is necessary to take timely measures, such as cleaning the air switch, replacing the circuit board, checking the wires and appliances, etc., to ensure the normal use of electricity in the home. If the problem cannot be solved by wide wheel cracking on its own, it is recommended to seek a professional electrician for on-site maintenance.

Household electricity will have electricity and no electricity for a whileHello, I am happy to answer for you. <> there will be electricity at home for a while, and there will be no electricity for a while, which is a problem of poor circuit contact. It is the most likely type of circuit failure that occurs when the power lines that power your home are aging all year round.

It is important to check the wiring of each circuit, such as the switch contact in the junction box, especially the joint between the aluminum wire and the copper wire, or the access point between the aluminum wire and the switch, because the copper and aluminum wires are very easy to cause poor contact due to electrochemical reactions. In short, the cause of electrical flickering is the cause of poor contact. The above is the information I have found for you, I hope it will be helpful to you.

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood! <>

There could be three reasons for this:

1. The boot itself is more power-consuming, and the more programs you start at boot, the more power you consume.

Second, there is a small bug in the power management software of this mobile phone, and the display of battery power is not refreshed in time after the power is reduced.

3. If the battery is used for too long, it will be charged with virtual electricity.

Solution: The first two reasons do not affect the use of the mobile phone; If this situation often occurs, it may be the third reason, if you care about this, you can replace the battery, if you don't care, it doesn't have much impact, just pay more attention to charging.

1. Serious battery wear due to incorrect battery use, such as starting high-power applications when charging mobile phones. Therefore, when the mobile phone opens the high-power program, it will be overloaded and cause no power.

2. It may be that when using the mobile phone, you accidentally get into the water or damage the motherboard of the mobile phone for some reason, which will cause the circuit to be abnormal or short circuited, resulting in the sudden loss of power of the mobile phone.

3. The system detects that the power display is abnormal, resulting in the display of the mobile phone that should be out of power as a full state, which is obvious and will suddenly run out of power, which can be improved after restarting.

4. An incompatible plug-in may be installed on the phone, causing the phone system to crash, at this time, delete the plug-in or restore the factory settings.

The corresponding workaround is as follows:

1. If there is a problem with the mobile phone battery, if it is removable, replace the battery with a new one, and then use the battery reasonably to avoid battery aging again. If it is a non-removable battery, replace it with a new one.

2. If you have any problems with the motherboard, please consult the professional maintenance personnel of the store, and repair it if it can be repaired, and replace it if it cannot be replaced.

3. The power display problem can be improved by restarting.

4. Please delete or restore the factory settings for software problems.

It may be that the battery is aging, and the effective capacity of the battery will be greatly reduced and the internal resistance will increase, so the use voltage and power will drop quickly.

You need to replace the battery.

The phone ran out of battery after an hour of use, it should be that the phone battery was broken and could not store a lot of power. Or the mobile phone line is aging and consumes a lot of power, so the mobile phone will not take long to run out of power.

If your phone dies after an hour of use, it's a problem with your battery. In other words, some mobile phone batteries have been used for too long, so the battery should be replaced. In other words, this should be a battery leakage.

If the phone is used for an hour, there should be no power, the battery is seriously aging, and a new battery needs to be replaced, if it is a new mobile phone, there should be leakage, and you can go to the merchant to replace the phone.

Your phone dies after an hour of use because the battery of this phone has aged and cannot be used, and the battery should be replaced.

Your phone is draining so fast, it must be that your battery is aging. It is recommended that you go and replace a battery. Or just change your phone. It is also necessary to prohibit unused programs from running in the background to reduce waste.

Said the phone ran out of battery and disappeared for a day.

Hello, it is a pleasure to serve you and give you the following answers: Reasons:1

Battery drain: The battery of the phone may run out of power, causing the phone to run out of power and disappear for a day. 2.

Power failure: The phone's power supply may malfunction, causing the phone to run out of battery and disappear for a day. Workaround:

1.Charging: Plug your phone into the charger and charge your phone until your phone's battery level returns to normal.

2.Replace the battery: If the phone battery fails, you can try to replace the battery to restore the normal use of the phone.

Steps:1Check the battery:

Check if your phone's battery is drained, and if it does, you can try to charge it. 2.Check the power supply:

Check if your phone's power supply is malfunctioning, and if it is, you can try replacing the battery. Personal experience in Fanzhou: It is a very annoying thing for the town to have no power on the mobile phone, so we should always check the battery level of the mobile phone to avoid this situation.

In addition, we should also check the power supply of the mobile phone regularly to avoid malfunctions. Tips:1

Check your phone's battery level regularly to avoid running out of power. 2.Check your phone's power supply regularly to avoid malfunctions.

3.Try to use the original battery to avoid battery failure.

Is this the case for you? If so, it may be that there is a problem with the wiring in your house, and you can find out by buying an electric pen. First you use an electric pen to check the live wire (if you don't know that is the live wire, you use the electric pen to insert it into the hole of the socket), the electrical appliance stops to see if your electric pen neon tube shines, check the zero line is the same way to check (if the two holes can not make the neon tube shiny, it may be that there is a problem with the fire wire in your home, you can first look at the wire connector at home, the wire joint with poor contact will be very labor-saving or from the new connection, if there is no problem, then you have to find someone to help you check; If there is one that can make the neon tube shiny, it is a problem with the zero line, or the same check joint or reconnect, if it is okay, you still have to find someone).

By the way, if the neon tube of your pen does not light up at that point, and when there is no power, it is also a problem with the zero line.

I don't think you're offending others, and others are fixing you? Generally, such a person is also a skilled worker.

By the way, if you use a knife switch or an empty open (circuit breaker), if it is a circuit breaker, use a screwdriver to tighten the crimping screws.

There will be power in the family room and there will be no power for a while, which is caused by the virtual connection of the line, because the false connection will lead to the intermittent contact of the line.

Solution: 1. Check whether the switch terminal is reliable and firm.

2. Check whether there is a problem with the incoming power supply.

It is estimated that there is a poor contact phenomenon in a connector of the power cord at home, especially where the copper core wire is connected to the aluminum core wire, which is particularly prone to such a situation.

"There is electricity"Too general! Is it just that the voltage tester is on when there is power? Can I use electrical appliances?

What is the voltage of the socket when there is electricity in that room? If the electrical appliance can be used, it is really possible that the circuit is connected incorrectly, but this possibility is very small. Get an electrician to help you take measurements!

Are you the only one? If so, it is estimated that your home line is in poor contact.