Is it necessary to paste the explosion proof film of the tempered glass door

Updated on Car 2024-06-21
9 answers
  1. Anonymous users2024-02-12

    1. In terms of characteristics, tempered glass has a self-explosion rate of about three thousandths, which is determined by its properties. In addition, the quality of tempered glass manufactured by different production levels will also be high and low. Many factors such as the shape of tempered glass, the supporting conditions, the use environment, and whether there is an external impact may cause damage to the glass and may cause accidental injury.

    Therefore, it is recommended to paste a layer of excellent transparent safety explosion-proof film is a simple and easy way to do it, with this layer of film, it can greatly reduce the splashing of glass fragments, and the possibility of injuring people is smaller.

    2. From the perspective of technology, tempered glass is a special glass made of ordinary glass through a variety of processes, which is difficult to damage without external force, but when subjected to external temperature changes, it is easy to cause physical expansion and contraction resulting in self-explosion. In the process of glass tempering, some manufacturers have backward technology and equipment, and the tempered glass produced has potential safety hazards and is prone to self-explosion. Therefore, when using tempered glass, a layer of explosion-proof film can be pasted to prevent self-explosion.

    3. The film of tempered glass film is very simple, clean the glass first; Secondly, after determining the front and back of the tempered glass film, the film can be aligned; Touch the middle of the glass with your hand, the air will automatically disperse, and the air bubbles can be automatically removed by the tempered glass film. Even if there are small bubbles just after the glass film is applied, it only takes 1-2 days for the bubbles to disappear automatically. If the tempered glass film is crooked, it can also be torn off and repasted, because the tempered glass film relies on electrostatic adsorption, not silicone bonding.

  2. Anonymous users2024-02-11

    If you have rich money, you can stick it up, and the anti-vibration and shattering will also be enhanced, and it will not explode everywhere if it is broken.

  3. Anonymous users2024-02-10

    Bathroom security film can prevent glass from self-explosion, and now many experts have proposed to put safety film on the glass, because tempered glass has a self-explosion rate of three thousandths, and the dragon film can well stick the glass together, so as to prevent the glass from hurting people after self-explosion and breaking.

  4. Anonymous users2024-02-09

    Yes, it's safer. If the glass is broken, it will not fall.

  5. Anonymous users2024-02-08

    Using tempered glass is not to be afraid, on the contrary, it is easier to use tempered glass.

    The reason for not using ordinary glass is that people are afraid of falling and hitting the glass, and the broken glass will cause serious injuries to people, while the broken tempered glass will not cause that kind of injury.

    If you put explosion-proof film on it, once the glass breaks, the large pieces of broken glass are also fatal, so no!

  6. Anonymous users2024-02-07

    Hello, dear, the quality and transmittance of the explosion-proof film are much better, but it is expensive, the tempered film is moderate, and the quality is also good. You can follow the following methods to select a mobile phone film. 1. First of all, choose the tempered film - blue light version and purple light version (relatively better for the eyes); 2. Secondly, choose tempered film-bright version; 3. After the other gel versions are pasted, I feel that there is no toughened impact resistance and drop resistance.

    From the performance point of view, the explosion-proof film will be safer than the use of tempered film, but it still depends on the user's choice of mobile phone use to make a comparison.

  7. Anonymous users2024-02-06

    This can be based on your own actual situation, the explosion-proof film can be anti-smashing, anti-hitting, also has a certain degree of heat insulation, ultraviolet insulation, and another point is that the glass looks clean and new, just like a mobile phone, most people will give their mobile phone film, and will buy a protective case, both of which have similar purposes.

  8. Anonymous users2024-02-05

    This can be decided according to the actual situation, and it is of course better to post one. Because the tempered glass has a self-explosion rate of 3 per 1,000 from the production of the glass, you are not afraid of 10,000 in case, so it is more safe to paste one. Not only is it psychologically more reassuring, but it is also intuitive in the actual experience.

    The thickness of the explosion-proof film reaches 11mil, which can enhance the strength of the glass by 5-20 times. The explosion-proof film can not only be anti-smashing and anti-hitting, but also has a certain degree of heat insulation, ultraviolet insulation, and privacy protection function, so that the outside cannot see the inside. In short, whether to stick or not, it still depends on personal security awareness and ideas.

    Just like a mobile phone, most people will give their mobile phone a film and buy a protective case, both of which have similar purposes.

  9. Anonymous users2024-02-04

    It is an explosion-proof point, on the one hand, it is to increase the adhesion of the glass, and the most important thing is to increase the touch sensitivity of the tempered glass, and the response is faster.

    Tempered glass mobile phone film is a new mobile phone protective film launched in China in 2012, which is currently the most powerful high-end new product to protect the screen.

    The thickness of this protective layer is only millimeters, which can completely cover the original screen surface, prevent damage and scratches by external forces, and increase the impact absorption, which is 5 times higher than the standard of PET film. It does not affect the effect of the screen.

Related questions
6 answers2024-06-21

If it can't be broken, the glass slag won't fly around or shatter all over the ground. Basically, the glass is still there after it is broken, and the cracks are still there, which is mainly to emphasize a safety performance. (Some films can also partially block or reflect light, or block part of ultraviolet rays.) >>>More

3 answers2024-06-21

After years of research on rare metal technology, Cactus Car Safety Film has always adhered to the core of creating a green life and advocated the concept of creating a healthy environment in the car. Combined with the traditional film theory, abandon the problem of ignoring the oxidation of the solar film due to sunlight, take the solid foundation as the first, improve the essence of the film at the same time, through the conditioning of metal elements, so that the heat insulation system, antioxidant capacity and service life of the solar film can reach the optimal state, so that the solar film can be displayed to you in the most balanced, stable and healthy state. >>>More

22 answers2024-06-21

Of course, it's posted from the inside! The film is first cut on the outside, then shaped, and finally attached to the inside of the glass. The function is to block ultraviolet rays and heat insulation. >>>More

9 answers2024-06-21

Sticking it on the inside of the car glass, go to the one next to the University for the Aged on Houhu Jinqiao Avenue, it seems to be called Zefeng. I posted it there, a friend introduced the past, I was going to go there to post a Johnson & Johnson, and then the clerk recommended an American global one, it felt good, that Johnson & Johnson and the global test it, or choose the global world. Sent a solar film maintenance, and there is also a tracking service.

8 answers2024-06-21

Also known as explosion-proof disc or rupture disc. When the pressure in the container exceeds a certain limit, the film is broken first, so the pressure in the container can be reduced and avoided. It is widely used in pressure vessels. >>>More