Where is the explosion proof film pasted, and how to paste the explosion proof film of the mobile ph

Sticking it on the inside of the car glass, go to the one next to the University for the Aged on Houhu Jinqiao Avenue, it seems to be called Zefeng. I posted it there, a friend introduced the past, I was going to go there to post a Johnson & Johnson, and then the clerk recommended an American global one, it felt good, that Johnson & Johnson and the global test it, or choose the global world. Sent a solar film maintenance, and there is also a tracking service.

At present, there are many car film brands on the market, and the better brands are Northern Lights, 3M, Weigu, Ray-Ban, Quantum, etc., you can log on to the brand's official website to check, the jargon has "three points of film, seven points of process", the film is good and the process is good, this is very critical, you can compare and compare everywhere. Only regular authorized stores are qualified to operate authentic automotive solar films, and the promised warranty is guaranteed, which is generally provided by brand companies or manufacturers, and is definitely not a dealer, so you must pay attention!

Now there are a lot of film brands, and it is easy for car owners and friends who do not understand this piece to be fooled, for the sake of insurance, they must go to the regular brand authorized store to apply the film. Don't paste miscellaneous films, what Sony, 4S original, and some copycat brands, such as 3M Platinum, Johnson & Johnson 99, Weigu Star, etc., adding some words in the back row of the famous brand are all copycats, all of which are fools. Among these good brands, the Northern Lights is the best in the film.

Friend, tell me where you are, maybe I can introduce you to a few authorized dealers.

Explosion-proof film is attached to the inside of the glass of a car or building.

Many places can be pasted, car windows, architectural glass, etc.

In order to prevent the phone from falling and breaking the screen, everyone will choose to put explosion-proof film on the phone. Next, pchouse will talk to you about how to paste the explosion-proof film of your mobile phone.

1. Clean the screen: Use a BG cloth (or a fiber soft cloth or glasses cloth) to wipe the screen and clean the mobile phone screen.

2. Get the initial impression of the film: take out the protective film from the package, don't be in a hurry to tear off the release film, put it directly on the mobile phone screen, and get the preliminary impression of the film, which is to observe the fit of the edge of the film and the mobile phone screen, and have a general understanding of the position of the film, which will help the film to be carried out later.

3. Tear a part of the release film: observe the label on the protective film, tear a part of the release film marked "", and pay attention to avoid fingers touching the adsorption layer of the protective film.

4. Slowly paste the protective film to the phone screen: align the adsorption layer of the protective film with the corner of the screen, be sure to make sure the position is aligned, and then paste it carefully. While pasting, tear off the release film, if the film process produces bubbles, you can pull back the film and re-apply.

5. After confirming that the position of the film is completely correct, then completely tear off the release film. After the whole protective film is pasted on the screen, if you find that there are still bubbles, you can use BG to scrape the screen to exhaust the air.

6. Tear off the release film completely, tear off the release film completely, and wipe the screen with a cloth, and the whole film process is completed.

Hello, dear. We're happy to answer your <>

The automobile explosion-proof film is pasted as follows:1Cleaning body surfaces:

First of all, the surface of the body must be cleaned thoroughly, remove dirt, oil, dirt, etc., to ensure that the surface of the film is clean and pollution-free, so as to ensure that the film is firmly pasted and not easy to fall off. 2.Measure diaphragm size:

To measure the size of the diaphragm that needs to be pasted according to the size of the car body, you can generally use an accurate ruler or tape measure to measure the size of the diaphragm, and then purchase the appropriate diaphragm according to the size. 3.Wrap:

Place the diaphragm on the surface of the body, peel off part of the diaphragm with a blade, and then slowly paste it, be careful, do not paste creases or folds, and then paste the diaphragm well, and use a rag to compact the diaphragm to make it fit tightly with the surface of the body. 4.Done:

Finally, the edge of the diaphragm is flattened with a blade to make it fit perfectly with the edge of the body surface to complete the film application of the explosion-proof film.

How to paste the car explosion-proof film is as follows:

1. Wash the car, ensure that the natural environment of the operation is clean and tidy, and clean the window glass of the vehicle inside and outside to prevent interference with the actual effect of the subsequent installation.

2. Tailoring, according to the size of the car window, the appropriate car film can be slightly larger, but not small, because the heater will be slightly smaller after blowing.

3. Paving, generally The automobile explosion-proof film is divided into a double layer of protective film and film, before pasting, some cold water should be sprayed on the laminated glass, and the surface of the film to tear off the protective film also needs to be sprayed to reduce the stickiness of the adhesive, so as to facilitate the smoothing and adjustment of the parts of the film at both ends.

4. Setting, the car window has a certain inclination, to use the heater to carry out the baking film shaping, the process of baking needs to grasp the ambient temperature and the rate of movement of the hot air welding gun, can not stay in a position for a long time, to ensure that it is not easy to damage.

5. Paste the film, carry out the installation and paste after the shape, spray some detergent on the inner laminated glass, and the film surface of the protective film needs to be sprayed to tear off, and you can announce the installation after pointing to the part.

6. Catch water, there are likely to be some bubbles and water in the whole process of loading and pasting, use the Yangtze River Delta plastic scraper to carry out the water, if you don't have this kind of special tools, you can also take a hard credit card such as a savings card or VIP card instead.

7. Inspection, check whether there are bubbles between the car film and the tempered glass, whether it is firmly pasted, whether there are wrinkles, whether there are scratches, etc., if there is no problem, use a cotton towel to clean the water on the outer edge of the laminated glass.

Vehicle film is not as simple as the film on the mobile phone, must have a certain experience and professional facilities can be carried out, if you can, it is best to choose a professional film is better, how to paste the car explosion-proof film, I will tell you about some of the processes of the car explosion-proof film and the common problems after the film, such as a few days after the film can not open the window for ventilation.

Do not open the window for ventilation for a few days after the film is applied.

If it is applied in a car 4S shop or beauty salon, the master will generally prompt after applying the film that it is best not to lift the window glass of the motorcycle within a week. Due to the lifting window in the short term, it is likely to cause the car film to move, because the car film and the tempered glass are not sufficiently dry. After the film, the car should be parked in an area with good sun, which is conducive to the volatilization of water in the film, and there is no need to wash the car within three days to prevent the water from falling off due to the film.

How to paste the car explosion-proof film.

1. Car washing. Ensure that the natural environment of the operation is clean and tidy, and clean the internal and external windows of the vehicle to prevent interference with the actual effect of later installation.

2. Tailoring. According to the size of the car window to cut the appropriate car film, the specification can be slightly larger, but not smaller, because the heater will be slightly smaller after blowing.

3. Paving. Generally, the automobile explosion-proof film is divided into protective film and film double-layer, before pasting, the laminated glass should be sprayed with some cold water, and the film surface of the protective film needs to be sprayed to reduce the stickiness of the adhesive, so as to facilitate the smoothing and adjustment of the parts of the film at both ends.

4. Finalization. The car window has a certain inclination, and the heater should be used to carry out the baking film shaping, and the ambient temperature and the rate of movement of the hot air welding torch need to be grasped in the process of baking, and it can not be stayed in a position for a long time to ensure that it is not easy to be damaged.

5. Film. After the shape is set, the inner laminated glass is sprayed with some detergent, and the surface of the film that is torn off the protective film also needs to be sprayed.

6. Catch water. There are very likely to be some bubbles and water during the whole process of installation, use a Yangtze River Delta plastic scraper to carry out the water, if you don't have such special tools, you can also use a hard credit card such as a savings card or VIP card instead.

7. Inspection. Check whether there are bubbles between the car film and the tempered glass, whether the sticking is firm, whether there are wrinkles, whether there are scratches, etc., if there is no problem, use a cotton towel to clean the water on the outer edge of the laminated glass.

How to paste the automobile explosion-proof film, first, before the film, the vehicle must be comprehensively cleaned to ensure that the natural environment of the operation is clean and tidy, and the vehicle window glass is cleaned to prevent interference with the actual effect of the later installation. Second, some of the relevant films are dedicated to special cars, and they are cut according to the size of the relevant original car, and some need to be cut on site. Tailor the appropriate car film according to the size of the car window, and the specification can be slightly larger to carry the point and thoroughly clean the surface of the vehicle's windshield.

Some cold water should be sprayed on the laminated glass first, and the surface of the protective film should also be sprayed to reduce the viscosity of the adhesive and facilitate the smoothing and adjustment of the parts of the aligned film at both ends. Third, the car window has a certain inclination, to use the hot blow gun to carry out the baking film shaping, the process of baking needs to grasp the ambient temperature of the hot air welding gun and the rate of movement, four jujube type, after the shape begins to work on the film, spray some detergent on the inner laminated glass, tear off the film surface of the protective film also needs to be sprayed, there are likely to be some bubbles and water in the process, use the Yangtze River Delta plastic scraper to carry out the water, if it is their own operation. Without such a dedicated tool, you can also use a hard credit card such as a debit card or VIP card instead.

Fifth, check whether there are bubbles between the car film and the tempered glass, whether it is firmly pasted, whether there are wrinkles, whether there are scratches, etc., if there is no question, clean the water on the outer edge of the laminated glass with a cotton towel.