Can I use a 5v charger with a rated voltage of 11 1v?

Updated on number 2024-06-11
28 answers
  1. Anonymous users2024-02-11

    This is possible, and there will be no problems, it can achieve a very good use effect, but the charging speed is relatively slow.

  2. Anonymous users2024-02-10

    Rated voltage: Yes, this cannot be replaced by a 5V charger.

    A 5V charger outputs only 5V of voltage. Unable to reach the required rated voltage.

    Therefore, you can't use a 5V charger instead.

  3. Anonymous users2024-02-09

    If the rated voltage is volt, if you want to use a five-volt charger, this will definitely not work, and it is too slow to charge with a five-volt charger, and basically you can't charge it.

  4. Anonymous users2024-02-08

    It definitely can't be charged, uh, the constant voltage is 11 volts, and your mobile phone charger is the dance costume. Then he will definitely not be able to charge the computer.

  5. Anonymous users2024-02-07

    There is no problem with this, they are universal, interchangeable, you just need to be careful not to get too hot.

  6. Anonymous users2024-02-06

    The water on the 1st floor will definitely not reach the 3rd floor without adding a pump. If you have to connect, the water on the 3rd floor will definitely leak to the 1st floor.

    It's the same with battery charging. It can only be charged high to low, but not low to high.

  7. Anonymous users2024-02-05

    The rated voltage volt, can not use a 5 volt charger, can not be charged.

  8. Anonymous users2024-02-04

    Hello, no. You can buy it according to your preference.

  9. Anonymous users2024-02-03

    I should be able to use a quadruple charger at 11:30 today, this should be okay, but this should be difficult to charge into.

  10. Anonymous users2024-02-02

    I feel that they can definitely use each other, and under normal circumstances, they can use this charger.

  11. Anonymous users2024-02-01

    I want 11 o'clock shipping today, can I use a 5V charger? Hair is so miraculous, both of them are best used regardless of the original matching.

  12. Anonymous users2024-01-31

    I still sleep a little bit that day, can I use a five-volt charger? It is not possible to have five spokes that are lower than the complex.

  13. Anonymous users2024-01-30

    The rated voltage, if the charger voltage is low, it is impossible to complete the charging.

  14. Anonymous users2024-01-29

    If it's a bit unexpected, this should be a five-dimensional charger that can be used, mainly for the two of them at home, and it should be possible to do some practical things next week.

  15. Anonymous users2024-01-28

    This ** is great to him, if you use this five-point charger, it is basically charged in a particularly slow place.

  16. Anonymous users2024-01-27

    Well, constant voltage volt, can I use a five-volt charger? It works, but the charging is too slow.

  17. Anonymous users2024-01-26

    Well, can a constant voltage MV be used with a five-amp charger? This one is too small, right? I think.

  18. Anonymous users2024-01-25

    Is it possible to use a 5 volt charger for fixed voltage clothes? This should be fine, take a look at the introduction of this aspect.

  19. Anonymous users2024-01-24

    If the rated voltage is voltile, this can be used with my charger, because he can't use a voltage larger than himself, but he can charge it with a voltage smaller than himself.

  20. Anonymous users2024-01-23

    Hello, can you use that 50,000 charger?

  21. Anonymous users2024-01-22

    OK.

    The rated output voltage of a 5V 1A power supply is 5V, and the rated maximum output current is 1A, which means that the power supply can output a maximum current of 1A under normal circumstances. The 5V 500mA mobile phone has a rated input voltage of 5V, and the rated maximum input current is 500mA (500mA =, that is to say, the maximum current that this mobile phone can obtain from the power supply is only 500mA, which is lower than the ** capacity of the power supply, which is okay.

    The 5V1A charger has low power, the charging is very slow or the charging does not go in, the charging is not satisfactory, and there will be no other damage. If you change the plug, you can't make a mistake with the positive and negative poles, and you may burn out the circuit and not be able to charge.

    If the 5V1A charger looks big and heavy, it will work better, and the small and light charger will definitely not work.

    For its service life and the maximum amount of charge that can be carried, generally speaking, 1A should be less than 2A, but in the current many manufacturers in the production of chargers will increase the resistance and capacitance, electronic product charging interface elements also choose multi-purpose or multi-resistance sockets, so in actual use generally will not be affected.

  22. Anonymous users2024-01-21

    The machine itself can be charged with a battery, you can use a 5V1A charger to charge, but the charging time will be a third slower, the machine itself does not support charging can only be plugged in, rated current appliances, 1A charger can not move.

  23. Anonymous users2024-01-20

    If you use a 5V1A charger, you may not be able to work properly.

    It is recommended to use a power adapter or larger, so that you can ensure that the machine works properly.

  24. Anonymous users2024-01-19

    It depends! If it is a machine with a battery like a mobile phone, it can be used, and at most it takes a lot longer to charge.

    But if it is a simple 5V load, it will overload and burn the charger.

  25. Anonymous users2024-01-18

    Power is the voltage multiplied by the current, and the output power is 5 watts for a 5 volt 1 amp charger.

    Its input power must be greater than the output power, and it is necessary to pay attention to the unity of units in order to get the correct answer.

    5V1A chargers are generally found in small electronic devices, such as smartphones and PCs, MP4, tablets less than 7 inches, etc. Mainly because its electronic components and screen are smaller, and the power consumption is also controlled to a certain extent.

    For the coefficient of its service life and the maximum amount of charge it can carry, 1a is generally less than 2a.

    However, many manufacturers will increase the resistance and capacitance in the production of chargers, and the charging interface components of electronic products also choose multi-purpose or multi-resistance sockets, so they will generally not be affected in actual use. For many tablets, it is generally recommended to charge the power supply on the computer or a special charger to charge.

    In fact, it is to prevent more users from choosing to charge with mobile phone chargers, thus causing certain safety risks. Since 1A and 2A will be different in terms of power, the general 1A can provide 5W and 2A provides 10W, this aspect should also pay attention to the requirements of its electronic products when using, choose the appropriate power and remember not to run at excessive power.

    Mobile phone charging power:

    The power of the mobile phone charger is the output voltage x the output current (which can be seen on the nameplate of the adapter), for example, the input AC220V and the output is DC5V-2A (power 10W); The input AC220V output is DC5V-1A (power 5W) The wattage of the mobile phone charger generally refers to the output part, and the output wattage = output voltage x output current. The traditional 5V1A charger has a 5W output; 5v2A is 10 watts of output.

  26. Anonymous users2024-01-17

    If it is affected, the charger cannot be replaced in this way. The voltage or it doesn't matter, the difference is negligible, the key is the current. The current marked on the charger is the maximum output current that the charger can work normally, if the actual output current exceeds this value, the output voltage of the charger will become unstable, and the heat generation of the charger will increase at the same time, and it is easy to burn out the charger.

    You should use a charger of more than 1000mA instead.

  27. Anonymous users2024-01-16

    p=ui

    Power (w) = voltage (v) * current (a) substitution: power = 5 * 24 hours a day, a month is 30 days, 8 * 24 * 30 = 5760w = 1kw working for an hour of power consumption is one kilowatt-hour, 8w continuous use of one month of power consumption is 1kw = 1000w

  28. Anonymous users2024-01-15

    Summary. Can the charger charge 12v: It can't be simply you can charge it or not.

    There are two situations as follows: The smart charger can fully charge the 12V battery, because the charger will automatically detect and control the charging process until it is fully charged. 2. Non-intelligent 14V chargers, as long as the charger is equipped with voltage regulation, voltage monitoring meter, and current indicator meter, it can also be charged under manual intervention, but it must be manually on duty. 3. It is forbidden to charge the 12V battery with a 14V charger that is neither intelligent nor has voltage regulation, voltage detection meter and current indicator table, which will damage the battery and shorten the life of the battery, and cause ** and endanger the safety of life and property.

    Can the charger charge 12v.

    Can the charger charge 12v: You can't simply charge it or not. There are two situations as follows: V smart charger, which can fully charge a 12V battery, because the charger will automatically detect and control the charging process until it is fully charged.

    2. Non-intelligent 14V chargers, as long as the charger is equipped with voltage regulation, voltage monitoring meter, and current indicator meter, it can also be charged under manual intervention, but it must be manually guarded. 3. It is forbidden to charge the 12V battery with a 14V charger that is neither intelligent nor has voltage regulation, voltage detection meter and current indicator table, which will damage the battery and shorten the life of the battery, and cause ** and endanger the safety of life and property.

    The 14V charger can not charge the 12V lithium battery, this is because the rated voltage of the 14V charger is greater than the rated voltage of the 12V lithium battery, and the rated voltage between the two sleepy people can not match, if the 14V charger is used to charge the 12V lithium battery, the large voltage of the 14V charger will burn out the 12V lithium battery, and the charging protocol between the two does not support charging.

    It is a battery for charging a toy car (two 6V series).

    V smart charger Shizhi, it can fully charge 12V batteries, because the charger will automatically detect and control the charging process until it is fully charged. 2. Non-intelligent 14V chargers, as long as the charger is equipped with voltage regulation, voltage monitoring meter, and current indicator meter, it can also be charged under manual intervention, but it must be manually on duty. 3. It is forbidden to charge the 12V battery with a 14V charger that is neither intelligent nor has a voltage regulation lead comer, electric locust resell voltage detection meter and current indication table, which will damage the battery and shorten the life of the battery.

    Yes pro. Yes pro.

Related questions
12 answers2024-06-11

Rated voltage: Refers to the normal voltage level required for the normal operation of electrical equipment. >>>More

10 answers2024-06-11

Rated power: 80W - the output power of the motor.

Rated voltage; 220VAC - AC refers to alternating current, and the normal working voltage is 220V rated current: - Normal working current. >>>More

6 answers2024-06-11

Runeword: White

2 Grooved Scepter (WAND). >>>More

11 answers2024-06-11

The phase voltage of the three-phase electricity is 380V, and the voltage of the A-phase line of the three-phase electricity is 380V, and the voltage of the B-phase line is 380V, as long as the voltage of the load is also 380V, there is no problem; >>>More

10 answers2024-06-11

If the input voltage is not enough or the number of miscellaneous coils in the 4-stage coil is not enough, the output voltage will not reach the rated value.