How to connect a laptop to the Internet tutorial

How to set up a network connection in win7:

1."Get started"menu, open the Control Panel, and then open the"Network and Internet" ——"View network status and tasks"。This opens the win7 system"Network and Sharing Center"Finish.

2.Click"Set up a new connection or network", in the new dialog box, select"Connect to the Internet"——"Broadband (PPPoE)."。

3.Fill in the dialog box according to the username and password provided by the home broadband service provider, including:"Username"with"Password"。Connection Name: You can choose the default name provided by the system"Broadband connection", you can also modify it yourself.

4.Click"Connections"If the username and password are correct, the network is smooth, and you can connect to the Internet.

Network Protocol Installation:

1.Turn on Network Connections.

2.Right-click the connection to which you want to add a network component, and then click Properties.

3.Do any of the following:

If you have a LAN connection, click Install.

If it's a dial-up, VPN, or incoming connection, on the Network tab, click Install.

4.In the Select Network Component Type dialog box, click Client, Service, or Protocol, and then click Add.

5.Do any of the following:

If you do not have an installation disk for the component, click the appropriate client, service, or protocol, and then click OK.

If you have an installation disk for the component, click the appropriate client, service, or protocol, click Install from Disk, insert the installation disk into the selected drive, and then click OK.

To connect your laptop to the network, you can access the computer network by having a wireless connection icon in the lower right corner of the taskbar, and then set a password to connect, as follows:

1. After entering the computer desktop, you can see that there is a wireless connection sign in the lower right corner of the taskbar.

2. Here you can see the wireless network that can be accessed by the laptop.

3. Click on the wireless network that knows the wireless password, and you can see that there is a "connection", click.

4. At this time, you will be prompted to enter the password, and the password will be omitted here. The direct connection is successful!

5. When you need to disconnect the wireless network, just click "Disconnect".

6. There is also one point to note here, that is, when connecting to the wireless network, you can check the "automatic connection", so that it will be automatically connected to the network when it is turned on.

Notes:1. The network cable of the laptop needs to be connected to the LAN port of the optical modem, and cannot be connected to the wireless router, otherwise the dial-up connection cannot be carried out.

2. When dialing in with a computer, remember to disconnect your wireless network.

1. Right-click the network icon on the desktop of win10 system and select "Properties", as shown in the figure below.

2. In the network and sharing center.

window, click "Set up a new connection or network", as shown in the image below.

3. Select "Connect to Internet" in the Settings Network or Network dialog box, and then click Next, as shown in the figure below.

4. Click Set up a new connection in the Connect to Internet window, as shown in the figure below.

5. Then select "Broadband PPPoE", as shown in the following figure.

6. Finally enter the ISP information provided by the Internet service provider, both and the password. Then click "Connect" as shown in the image below.

7. After clicking on the link, the system prompts that your Internet connection is being created, wait a while, and the broadband connection will be set.

Once connected, the Network & Sharing Center will display the wired network you just set up.

8. After the broadband connection is successfully created, you can see the broadband connection icon we just created in the network connection, right-click the broadband connection, and select "Create shortcut."

It can be convenient for us to quickly connect to the Internet in the future. This is shown in the figure below.

Steps to connect the computer to the network: you need to right-click the network settings in the lower right corner, if it is a dial-up connection, then click dial-up, set up a new connection, enter the username and password and click to connect, if it is connected to Ethernet, you only need to connect the network cable with the router and the computer.

Under Windows 7, the original"Network connection"Upgrade to"Network and Sharing Center", first make sure that the network cable is connected, then open the control panel of Windows 7 through the start menu, and click on it"Network and Internet", click in the new screen"Network and Sharing Center", in the Network and Sharing Center"of"Update your network settings"area, click"Set up a new connection or network", which will pop up"Set up a connection or network"dialog box, select the first item"Connect to the Internet", click"Next", select your network type, cell broadband and ADSL user selection"Broadband (PPPoE)."Can. Enter the direct ADSL username, password, etc., and click"Connections", wait for a while, and when you are done, you can turn off and use ADSL to surf the Internet.

Connect via a network cable or a wireless network card.

Apply to the telecom operator for security broadband, the installer will provide you with an optical modem, you prepare a router and hand it over to the installer for installation and commissioning.

The laptop can be connected directly to the Internet cable or wireless.

To connect to the network, a username and password are required, and a password is forgotten

Method 1: Manual customer service inquiry.

Method 2: Computer Query.

2. After entering, click on the personal center to log in.

3. Go back to the home page and click My Moves.

4. Among the popular services, select broadband reservation.

5. Enter another interface and select Password Change.

6. Finally, you can check the broadband.

How to access the Internet on the laptop:

1. How to access the Internet online:

1.The network cable crystal head plugs into the Internet port of the notebook.

2.Open the system, click to dial to connect, just like a desktop, and enter the Internet username and password.

3.Click "Connect" to go online.

2. Ways to not be able to access the Internet:

1.Turn on Wireless Router.

2.Set it up according to the router manual.

3.Open the laptop, enter the system, set up the wireless network, and connect to the Internet. Similar to your phone's Wi-Fi settings, find the wireless router name, tap on it, enter the password, and tap "Connect" to surf the Internet.