International electrician five hole one open socket wiring method

Five holes are opened.,It should be four wires, right?。。 A live wire, a neutral wire, a ground wire, a switch live wire to the light (no power). If there are two extra wires, it should be the switch live wire that controls the other two lights.

Measure it with an electric pen, and there should be only one live live wire (red). The zero line is blue. The ground wire is yellow-green (yellow with a line of other colors). Let's study the remaining two threads for yourself.

If there is short-circuit protection, you can use the fire line to try what it is for. If it's useless, you can block it out and don't use it.

This kind of national standard electrician, when wiring the socket with five holes and one opening, the main thing is to master the connection of one main live wire, and the other two need to open the zero wire connection mode, so that it can be used normally after the connection.

For this kind of socket with five holes. When we connect it, we go directly into the holeless socket without a fire, and a wire jumps out at the place of the live wire and connects to one end of the switch. The other end of the open loop can be connected to the lamp line.

I think that if you want to connect the socket of the international electrician five-hole socket, you can directly follow the background.

Like the international electrician's five-hole socket, he is all wired like this, which is the most common wiring method.

1.When you're wiring a five-pin switch, you need to notice: Each wire hole of the socket is marked with the corresponding wire.

The wiring method of the international electrician's five-hole socket is actually connected by a bus, and then each one is connected to the empty correctly.

The wiring method of the international electrician's five-hole socket is of course sub-zero and the live wire is absolutely displayed, and the switch can be connected to the light live wire.

The international electrician opens the socket with five holes, and its connection method is to connect its door wires together.

The most common extreme method is to connect it directly to the power cord and then restore it.

Five-hole one-open wiring method (first prepare a five-hole switch and insulated electrician's pliers):

1. First of all, we must know the live wire (L), the neutral wire (N) and the ground wire (E), L, N, E letter socket switches are generally marked behind, the live wire is generally red, the zero wire is generally green, and the ground wire is generally colored.

2. A single control with a five-hole socket connection method (switch control lamp): the popular point is that the switch only controls the lamp, and the socket always has electricity, which is the most common situation, and the line is connected.

3. One-open single control with five-hole socket connection (switch control socket): This situation is less common, switch control socket.

4. To add, don't get me wrong.

5. Under normal circumstances, there are only two incoming wires, one live wire and one neutral wire (there is no ground wire at this time), and we must distinguish which one is the live wire and which one is the zero line to avoid causing incomplete factors.

6. After the connection is completed, the switch box is installed, and then the power on test, if there is a sound, the line connection may have a short circuit, at this time, it is necessary to check carefully when the power is off.

Note: This connection method is suitable for the power within 1500W and the voltage is 220V, and is not suitable for water heaters, air conditioners and other high power. Do not operate with electricity, pay attention to personal safety.

These methods of opening the socket with five holes for mobile phone electricians, do not follow the instructions.

What is the method of receiving electricity? You can take a look at his main connection methods.

International. The method of wiring the international electrician's five-hole socket is as follows: You can pick it up directly.

The method of connecting the socket of the international electrician is to surround its computer room.

1. What is the wiring method of the five-hole socket, and the switch on the back of the five-hole socket has two binding posts, which are L and L1. As for the five-hole socket, two wiring methods can be used, which are switch control lamps and switch control sockets. If the wiring mode of the lamp is controlled by the switch, the power live wire port should be connected with the live wire of the socket and the L interface of the switch, and the live wire should be drawn out at the L1 port and connected with the lamp.

Then connect the neutral wire with the neutral port of the switch socket and the neutral port of the lamp, and finally connect the ground wire with the ground port of the switch socket. When using the wiring method of the switch control socket, the live wire should be connected with the L interface of the switch, and then the live wire should be connected with the live wire of the socket and the L1 interface of the switch, and the neutral wire and the ground wire should be connected with the neutral wire and the ground wire of the socket respectively. Second, how to choose the socket When choosing the socket, it is necessary to look at the workmanship of the socket.

The overall workmanship of the socket is very fine, and the connection position will not be flawed, there will be no variegation, and the overall color is very uniform. Then, when choosing a socket, check how good the internal quality of the socket is. The socket is also very smooth when the switch is pressed.

Hello dear! We'll be happy to answer for you. How to wire the switch socket of the international electrician A:

International electrician open and repentance socket panel household **86 type with single control switch wrong five holes is 2 holes 10A + 3 holes 16A + single control small switch on loss dust off socket.; Two wiring methods: ; A pin Zen, socket control socket; Firewire connector L1, switch L is connected with socket L**, neutral wire is connected to socket N, ground wire is connected to socket E (with a vertical and three horizontal symbols in the circle).

2. Socket control lamp; The live wire is connected to the socket L, the switch L is connected to the socket L**, the neutral wire is connected to the socket N, and the ground wire is connected to the socket E (with a vertical and three horizontal symbols in the circle).; Switch L1 is connected to the lamp connection wire (positive pole), and socket N is connected to the positive pole of the electric lamp.

Five-pin sockets with switches are already very common on the market, but most people's understanding of this kind of switch socket is still relatively simple, resulting in the function of such a good thing cannot be fully developed.

Before understanding their connection, let's first understand its structure, from the front, it is divided into two parts, namely the key (switch) part and the socket part, whether it is a single five-hole socket or a two-open five-hole socket, its socket part is a five-hole socket

There are two kinds of wiring with switch socket in five holes: one is to switch the lamp and not control the socket. Another type of wiring is a switch-controlled socket.

Kiss! Hello, happy to answer your <>

The wiring method of the five-hole socket is as follows: first connect the two incoming wires to the socket according to the provisions of the left zero and right phases, and then lead the phase wire from the socket to the upper end of the switch, and then lead a wire from the lower end of the switch to the electrical appliance (such as lamp), and also lead a zero wire from the socket to the electrical appliance. Finally, use a multimeter to measure whether there is a short circuit or an open circuit.

One open five holes requires four wires, one zero fire and one ground wire. Three connected to the socket N and L and the middle indirect ground, jump a live wire from L to the switch L as a power supply, and connect the control wire on L1. A five-pin socket is an outlet with a switch that can be plugged into both a two-pin and a three-pin plug.

When wiring, the live wire is connected to the switch end, the neutral wire is connected to the N end of the two-pin plug and the three-pin plug respectively, and the ground wire is connected to the ground end of the socket. The ground wire and the neutral wire cannot be reversed, nor can they be mixed. Notes:

1. Choose a socket wheel with a safety door. 2. The distance from the ground from the ground should not be lower than the open-mounted five-hole socket; The direction of the concealed power socket from the ground socket should be "left zero, right fire"; Protective grounding at the upper end. 4. The environment of the bathroom is humid, and it is best to choose an anti-shallow water socket.

Hope mine can help you <>

Do you have any other questions?

Hello, dear, for you to find out the method is as follows: how to wire the five-hole socket 1, there are 3 wiring ports behind the five-hole socket, respectively, L, N, E, which is marked L is the live wire, N is indicated is the neutral line, and E is the ground wire. 2. During the wiring process, connect the live wire (yellow, green or red) to the L wiring port of the socket, connect the light blue wire of the neutral wire to the N wiring port, and then connect the yellow and green wire to the E wiring port.

How to wire the new five-hole socket of the international electrician Hello, dear, for you to find the method as follows: how to wire the five-hole socket 1, there are 3 wiring ports behind the five-hole socket, respectively, L, N, E, which is indicated L is the live wire, Note that the N is the zero line, and the E is the ground wire. 2. During the wiring process, connect the live wire (yellow, green or red) to the L wiring port of the socket, connect the light blue wire of the finger standby zero wire to the N wiring port, and then connect the yellow and green wire to the E wiring port.

Hello, glad to answer for you, I hope mine can satisfy you

Generally speaking, the socket with the switch should be shot vertically when wiring, and then on the live wire terminal of the socket drawn from the lower end of the switch, the zero wire is directly connected to the zero wire terminal of the socket, and the ground wire is connected to the ground terminal of the socket. Generally, the live wire is connected to the switch to make the switch control the live wire, once the switch is in the stop state, the socket can be powered off, so as to ensure the safety of the line.