The wireless network card can be connected on one computer, but it can t be connected on the other

1) If it is a problem with the broadband itself, first directly connect the broadband network cable to test, if it is a broadband problem, contact the broadband customer service to solve it.

2) If it's a problem with the router, if it can be used originally, it can't be used for the time being, my own practice is to disconnect the power of the router and plug it in, and I'll take a look. After there is a factory reset, it can be used from the new settings (this is on the premise that the physical connection is correct).

If it can't be solved all the time, it is recommended to call the customer service of the router, they have **** guidance, I encounter a problem that I can't solve by myself, it is very useful to consult the advice they gave, and they will give the correct advice for your settings or operations.

3) If it is caused by a system problem, it is recommended to restore the system or reinstall it.

4) If you turn off the wireless switch, just turn it on, if it is a wireless connected by software, it is normal for the software to be difficult to use and often have problems, there is no better way, use a router. In addition, it is caused by the network card driver is not or is not suitable, and whether there is a problem with the network cable interface or network cable.

5) If you have any questions, please ask me.

I practice mobile phone or other computer can access the Internet, not necessarily your computer can access the Internet, the method look at the above, if you have any questions, ask me.

It is estimated that your wireless network card is not driver-free, so it can't be used.

Hello, why can't I connect to my wireless card, but it works on other computers?

Hello dear, you want to understand why the wireless network card can't be connected, but it can be on other computers, right? Hello! If your wireless network card can connect normally on other computers, but it cannot connect on a certain computer, it may be caused by the following reasons:

1.Driver issue: If there is a problem with the driver of the wireless network card, the device will not work.

You can try to locate the wireless card device in Device Manager, then right-click and select Update Driver to update before trying to connect. 2.Limitations of security software such as computer firewalls and anti-virus software:

If you have multiple security software such as firewalls and anti-virus software installed on your computer, it may cause the wireless network card to fail to connect. You can try turning off these security software temporarily before trying to connect again. 3.

Wi-Fi settings: If your Wi-Fi is set up incorrectly, or if it doesn't match your router's settings, it can also cause you to be unable to connect. You can try to reset the parameters of the wireless NIC, such as the SSID, encryption mode, and password.

4.Wireless card hardware failure: If the wireless card itself has a hardware failure, it will also cause the connection to fail.

Consider replacing it with a new wireless card. It should be noted that when trying to solve this problem, it is recommended to perform some simple troubleshooting steps, such as restarting the computer, restarting the router, etc. If the problem persists, you can troubleshoot and resolve it based on the suggestions above.

At the same time, you should also maintain the security and protection of your network devices and PCs.

Summary. Hello, I have seen your question and am sorting out the answer, please wait a while One router is connected to 2 computers, one with a wireless network card, showing that the network card is connected but not on the network.

Hello, I have seen your question and am sorting out the answer, please wait a while It shows that it has been connected, and it cannot be uploaded to the web page.

Hello, glad to answer for you. A router is connected to 2 computers, one with a wireless network card, the reason for showing that the Pengqing network card has been connected but cannot go to the network is to first check whether the network settings of the computer that cannot access the Internet are correct, such as the computer connected to the router should be set to automatically obtain IP and automatically obtain DNS. If there is no problem with the settings, then check whether there is a problem with the network card driver and the network card of the blocker and the front.

I hope the above is helpful to you If you are satisfied with me, please give a like<> click on the webpage to show what is the reason for the offline status.

Hello, glad to answer for you. These will cause your computer to go offline when browsing the web. The solution is to reset the router again, and then check that Zheng will try to browse the web to see the fault when you rent it carefully.

Ask about custom messages].

If you change the computer, the driver of the wireless network card, as well as the configuration of the wireless network must be re-debugged, and you can use the driver wizard to install the driver, and the network settings can be set according to the network connection of your original computer.

You have to talk about the specific phenomenon. Yes, it cannot be dialed. I still can't open a web page after dialing a number!