What is the cause of moldy cabinets in your home?

Causes of mold:If there is a return to the south of the day, it will enhance the humidity and temperature of the cabinet to provide living conditions for mold. Put a moisture-proof mat in the cupboard.

Although it is only a thin layer, it absorbs and decomposes odors and prevents moisture and dirt from entering from the bottom up. Even if the oil stains and soy sauce can be easily wiped off with wet wipes, the film will not penetrate and invade the bottom plate, preventing bacteria from multiplying.

Method 1: Laundry detergent.

Find a toothbrush at home if you don't use, dip a little laundry detergent, and use the most primitive method - brush and wash the moldy and black places, although it is very common, but the effect is definitely much better than wiping with a rag, but it is a little laborious; If you don't like that, then you can move on to the next method.

Method 2: Meiboss mold remover.

Shake the meiboss mold remover, adjust the nozzle into a mist, spray evenly, and wet all until it is wetted, and the mildew can be sprayed once to be effective, and the perennial mold or the heavier mold has formed need to increase the number of treatment times until the mold disappears. After spraying, the mold turns from black to yellow, and then slowly removes and decomposes it, and then naturally returns to its original color. (Note:.)

Use directly, do not dilute with water or use with other products at the same time, spray evenly, do not spray too much, do not flow excessively, so as not to waste).

Kitchen mold is generally the cause of dampness.

I believe that some families will experience the phenomenon of moldy cabinets, especially when the weather is hot and humid. So what should I do if the cabinet is moldy? Here's how to deal with mildew with ease.

Step 1: Wash the moldy area

When we find that the cabinet is moldy, the first thing to do is to clean the moldy place, you can treat it with a paper towel or a dry brush, if not, then change to a wet rag to wipe, in general, it is not recommended to use a wet brush to scrub, easy to damage the internal structure of the cabinet wood.

Brush clean with a soft brush and rinse off with alcohol. The old mold spots are first coated with light ammonia, left for a while, then coated with potassium permanganate solution, and finally treated with sodium bisulfite solution and washed with water, so that the mold marks can be removed.

If it is a cabinet'In this case, in addition to cleaning the surface mold, it is also necessary to paint or apply a layer of wax to the moldy place, the purpose is to isolate the air where the mold grows and prevent it from growing again. It's important to note that mold on cabinets doesn't just happen when they get wet, poor quality paint can also cause mold on cabinets.

Step 3: Find the root cause of the mold

Solve the problem from the source, the above is also introduced, the cabinet moldy is too heavy indoor moisture, the second is that the internal storage items are not dry, these two situations are the main factors that lead to the mold of the cabinet, therefore, in ordinary life we must pay attention to the surrounding environment drying, there are many drying methods, such as maintaining indoor ventilation, put some activated carbon or drying powder in the cabinet, I personally recommend putting activated carbon, because he has the function of drying, but also has the function of adsorption, It can effectively adsorb various microorganisms in the air and keep the inside of the cabinet dry and tidy. Of course, items stored inside the cabinet must be left dry.

If the cabinet door is moldy, you need to use a rag to remove all the mold on the door, and then brush it with a new layer of paint or wax oil to isolate the mold from contact with the air. It is also necessary to pay attention to opening windows for ventilation to keep the environment dry, and items need to be completely dried before putting them in the cupboard.

If the cabinet door is moldy, you need to wipe the mold on it with a dry rag first. If you encounter stubborn mold spots, you can use a rag dipped in a little dish soap to scrub the mold repeatedly until the mold is completely clean.

To prevent mold from growing again, you need to keep mold on your cabinets out from contact with the air. You can repaint the top of the cabinet or apply a layer of wax oil to effectively prevent the recurrence of mold.

The main reason for mildew is that the environmental humidity is too high and the stored items are not completely dried. Usually pay more attention to open windows for ventilation, and put some activated carbon to reduce indoor humidity, and the stored items must be completely dried.

1. There is always a musty smell in the cabinet, and the cabinet needs to be opened frequently for ventilation, and the musty smell in the cabinet is largely damp in the cabinet, and because the internal ventilation is often closed, it will lead to a peculiar smell in the cabinet, so it is necessary to open the doors and windows frequently for ventilation, which can speed up the volatilization inside the cabinet.

2. You can also put some activated carbon and aromatherapy activated carbon in the cabinet, which has a strong adsorption capacity, can quickly adsorb the odor in the cabinet air freshener, can cover up the musty smell in the cabinet, and can also put some dry tea in the cabinet, which can speed up the treatment of the musty smell in the cabinet.

Cabinets are important furniture in the kitchen, playing the role of storage, now they are generally custom cabinets, the most likely problem of cabinets is moisture and mold, especially the cabinets under the washing basinWhat about the resurgence of moisture and mold in the kitchen cupboards? What is the fastest way to deal with damp and moldy in the kitchen? Let's find out!

1. For rooms where doors and windows can be closed, the use of desiccant can effectively dehumidify. Quicklime is a very effective dehumidifier, but quicklime can only be used once and is corrosive. If you have the conditions, you can buy a desiccant that can be used repeatedly, which can not only save costs, but also play a good role.

After use, dry it over fire or in the sun, and continue to dehumidify.

2. If possible, install an air dehumidifier to dehumidify the room. Air dehumidifiers are divided into intelligent and non-intelligent types. Non-intelligent** is inexpensive.

Once started, it doesn't stop working, which can lead to excessive drying of the air in a closed room. The intelligent type can be set to air. Humidity, therefore, when using non-smart phones, pay attention to turning on and off in time, and use smart phones as economically as possible.

3. If there is no dehumidifier and dehumidifier, you can use a fine-porous sponge or thick cotton cloth and other highly absorbent fabrics to spread on the walls and floors with a large moisture bond. When the fabric is regularly filled with water, take it out and wring it out and dry it in the air, then place it on a dry absorbent material.

4. For the rainy season and summer rain tide, simple dehumidification is not the fundamental method. As long as the damp air flow from outside enters the room, the room will remain damp at all times. Therefore, in order to prevent humidity caused by the weather, it is best to close the doors and windows tightly when it rains to reduce the convection of warm and humid air indoors and outdoors.

Manuscript Song Potato. 5. If the damp water vapor comes from the room, it is necessary to tightly seal and cover all kinds of open water containers to prevent water evaporation, and do not place all kinds of damp objects indoors. If an open water container or a damp object must be placed indoors, in order to reduce humidity, an exhaust fan can be installed indoors to expel the humid air from the room outside.

What should I do if there is resurgence of moisture and mold in the kitchen cupboards? What is the fastest way to deal with damp and moldy in the kitchen? ?The above is the relevant content we introduced, the kitchen is a place where the water is relatively humid and easy to accumulate water, so it is best to buy cabinet plates with good waterproofness, pay attention to cleaning and maintenance, and deal with water seepage problems in time.

1. The dampness of the room is relatively heavy, and the wooden board is moldy after being destroyed by moisture.

2. The quality of the board itself will also be damp after decoration.

3. Paint quality and technical problems, poor waterproof performance and easy mold.

4. The problem of the clothes themselves is that they are directly put into the wardrobe without drying or there are stains and oil stains left on the clothes.

Wardrobe mold, the cause is generally rare.

One: The room is damp, and the wooden board is moldy after being wet.

Two: the quality of the board itself, mold after decoration.

Three: paint quality and technical problems, will also mold.

Other causes are rare.

It is advisable to dry the room first and then remove the mold with sandpaper or something. Repaint. However, if it is a varnish, etc., it will appear that the color is uneven if you brush it again, so you should pay attention to the quality.

Do not wash with water. If it is near a water source, such as a bathroom behind it, check whether there is a leak or moisture on the wall of the bathroom. Figuring out what causes mold is more important than being busy cleaning up the stain.

Moldy wooden wardrobes generally have the following reasons: the room is damp, and the wooden planks are moldy after being damp; The quality of the board itself is problematic, and it is moldy after decoration; Paint quality and technical problems, can also mold. This situation in your home is estimated to be due to heavy indoor moisture.

It is recommended to dry the room first, then remove the mold with sandpaper or other things, and then repaint, but if it is a varnish, etc., there will be uneven color and other phenomena such as brushing, so pay attention to the quality. Do not wash with water, check whether there are any leaks in the kitchen and bathroom at home or whether there is any moisture on the wall. Figuring out what causes mold is more important than being busy cleaning up the stain.

It is recommended to take the following moisture-proof measures: open the wardrobe, clean out all the clothes, clean the mold on the wardrobe, and use a hair dryer to open the low gear to blow the whole wardrobe for 2 minutes; Keep the wardrobe ventilated, tidy up the clothes at this time, and the moldy clothes must be washed again, and then all the clothes are thoroughly dried; Spread some dry newspaper, desiccant, or mothballs at the bottom of the cabinet to absorb some water; Usually the clothes in the wardrobe should not be too crowded; Keep an eye on the weather, and take time to dry your clothes or ventilate your wardrobe when the weather is good.

Finally, a simple way to check if the house is damp is recommended: use a roll of toilet paper with a tube core and place it near the cabinet. If you find that there is a large gap between the paper roll and the paper tube, and the paper roll is soft and swollen, it means that the room is relatively humid and you should pay attention to mildew.

It must be too damp inside, first clean out everything inside, then scrub it clean, remove the odor, and then put some desiccant.

Hygroscopic charcoal. Supermarkets sell it.

84 disinfectant plus hygiene pills.

1. Keep the cabinet dry.

The number one cause of mold in cabinets can be that the cabinets are too damp. Keeping your cabinets dry is the first law that will never change. Always pay attention to the ventilation effect of the kitchen, remove the waste in the cabinets frequently, and keep the cabinets clean.

Second, mold removal supplies.

Dehumidification and anti-mildew suppliesSome anti-mildew cleaning or dehumidifiers are essential in the home, which can dehumidify and prevent mildew from the corners of the cabinets at home anytime and anywhere. Place the boxed dehumidifier and keep the inside dry. In addition, you can also use multi-functional disinfectants, antifungal and antibacterial agents on walls, floors, bathrooms, etc., to easily clean and sterilize.

3. Moisture-proof materials.

Sticking moisture-proof materials, such as soft sheets, to the cabinets can keep the cabinets dry.

Fourth, anti-mildew wallpaper.

Brushing out of the mold-free space and using paint with a special antibacterial and anti-mildew formula to paint the home wall can effectively prevent mold germination and resist the growth of harmful bacteria, and make the dirt not easy to adhere, resistant to scrubbing, suitable for bathrooms, kitchens, basement walls are easy to damp and other places.

Fifth, skillfully remove mildew marks.

If the cabinet is not removed in time, the cabinet will become moldy again, and it will form a mark that cannot be removed, which will affect the appearance and health. Brush clean with a soft brush and rinse off with alcohol. The plaques were first coated with light ammonia, left for a while, then coated with potassium permanganate solution, and finally treated with sodium bisulfite solution and washed with water.