-
This folder is the driver and setting tool of the dell network card,The reason why your wireless network shortcut key works,It's because you install the tool inside,The shortcut key is actually to start this tool to complete the corresponding function。 So after you delete it, the shortcut doesn't respond, but your driver may have been installed in the system folder, so the wireless network may still be easy to use.
In fact, this problem is not difficult to solve,Go to dell**Find your network card driver,As long as your book is true,You can find the corresponding driver according to your service number,**windows
7 under the network card driver and network card setup program, then reinstall, and then restart the computer, everything is back.
For the problem of installing XP, there is nothing suitable and unsuitable, XP is an operating system, and it is not possible to talk about whether the configuration is suitable or not. The most important thing is whether the corresponding driver and software can be used. You only need to install the driver under this configuration XP, so no problem.
However, if your hard drive is a SATA hard drive, you may need to change its mode to ATA mode or IDE compatibility mode before you can successfully install XP.
-
The driver was removed.
1: It depends on the situation, but the driver of the wireless network card has been removed.
4: Take win7 system disc repair.
Good luck!
-
There are two ways to update the device you need to find with Internet access:
2. If it is not an exe driver, you can do the following.
Second, use the computer manager to update the driver on it.
2. Find "Hardware Detection" in the toolbox.
4. Click "Driver Installation" in the hardware detection.
5. You can see the "installation status", if it is not installed, you can click to install it directly.
-
On Windows 7, left-click and right-click on "Computer".
Right-click and select Properties.
Then select "Advanced System Settings" on the left tab.
In the System Properties settings dialog box, switch to the Hardware tab and select Device Installation Settings.
In the Device Installation Settings window, select No, and select the third item Never Install.
-
A network controller is a network card, also known as a network adapter or network interface card.
A network card is a type of computer hardware that is designed to allow a computer to communicate over a computer network. The network controller allows users to connect wirelessly or wirelessly. Each network card has a unique 48-bit serial number called the MAC address, which is written on a piece of ROM on the card.
Every computer on the network must have a unique MAC address. No two cards are produced with the same address. When transmitting, the network controller receives the data passed down from the previous layer and adds a header and tail to become an Ethernet frame.
When received, the network controller strips the Ethernet header and tail and sends it to the upper layer.
-
A network controller refers to a network card driver and a network card controller, including wired network cards and wireless network cards. If the network controller in Device Manager is an exclamation point, there are 2 ways to fix it:
-
It's the program that drives that hardware and allows you to use it.
-
Network cards or wireless networks are both called network controllers.
-
Please enable Wi-Fi and the button is FN+PRTSCR
-
The driver of the wireless card is uninstalled and reinstalled.
The F2 button of the laptop (in the case of Dell) is a wireless network switch. >>>More
Nowadays, the computer generally comes with its own network card, and you also need to go to telecommunications, Netcom or move to the hall to handle broadband before you can access the Internet, this broadband can be wire-pulled, or you can choose wireless, because you choose the package traffic or package duration, the cost is different. The wireless one is like a mobile phone card.
If it's all XP through the online neighborhood, you can create a new home team and copy the configuration files from one machine to another. If there is a non-XP, you can manually set the IP, the IP should be connected to the unlimited routing of the same network segment, set the wireless routing IP as the gateway and DNS, and then join the same workgroup, start running the IP, and can access another machine.
1. Are you sure someone is using a wireless router in your location? >>>More
MAC addressIt is also called a physical addressHardware addressor link address, which is written inside the hardware when produced by a network equipment manufacturer. IP addressThe MAC address is represented in binary in the computer, the IP address is 32 bits, and the MAC address is 48 bits. >>>More