Wireless network card computer interconnection, working group setup problem

If it's all XP through the online neighborhood, you can create a new home team and copy the configuration files from one machine to another. If there is a non-XP, you can manually set the IP, the IP should be connected to the unlimited routing of the same network segment, set the wireless routing IP as the gateway and DNS, and then join the same workgroup, start running the IP, and can access another machine.

Of course, you can just use the wireless router, you don't need to use two ADSL lines, one wireless route, and the two of you can be in the same LAN!

You don't describe it very well.

Both computers use separate ADSL lines, so you can actually make a VPN, but it's just slow and a little more troublesome.

Two computers with wireless network cards, so you can buy a wireless router and connect it to an ADSL modem. Connect the wireless network cards of the two machines to the wireless router. It is recommended to buy the antenna kind. For example, Leike's.

Now there is a three-in-one one on the market, which is ADSL modem + router + wireless in one. Such as ZTE's H608B, Huawei's HG522, Daya's HG-120WG and so on.

Both are about the same (upper), you weigh them.

Yes, 2 notebooks can use the same wireless route to access each other.

No, the two can be connected at the same time but only one line works, if the two are connected at the same time, it will be connected to the CDMA1X network card as the main connection, Netcom wired broadband as the auxiliary connection, if the CDMA1X network card is disconnected broadband will be connected.

OK.

If both NICs can access the Internet, at a certain time, the total speed of Internet access is not the sum of the two NICs.

1x is very slow, if you have already connected to wired broadband, there is no need to connect to 1x at the same time.

Yes, but it's expensive, so you don't have to bother.

Set up a workgroup under this interface, so that when the computer is connected to the local network, it will be automatically assigned to the assigned workgroup.

The method of joining the working group is very simple, in fact, the wireless connection mode is the same as the wired, but they work differently, and the method of joining the working group is the same.

My computer --- properties --- computer name --- changed (fill in the team name).

Isn't that OK??

The working grade has nothing to do with the wireless cat.

1. All wireless and wired to share is actually the same method You must turn off the system firewall first, and it is best to turn off the firewall that kills software. It's easy to test that way.

The system can enable the guest account guest, and then set the sharing in the right-click attribute of the folder you want to share.

Please turn off the firewall on both computers!

You'll need to set the network protocol to the same and enable file and print sharing.

The system firewall is turned off, and it is best to turn off the firewall to enable the guest account.