How to wear shoe polish, how to maintain leather shoes

What should I pay attention to when maintaining leather shoes in addition to shoe polish?

The purpose of maintaining leather shoes is to maintain the bright color and appearance of leather shoes; Protects the soft and comfortable wearing performance of leather, protects the feet for a long time, and prolongs the service life of leather shoes. In addition to this, the following points should be noted.

1) Leather shoes should not be exposed to the sun and roasted with fire. The upper leather of leather shoes is afraid of exposure to the sun and cannot be baked near the stove or other heat sources, because exposure and baking will quickly volatilize the oil inside the leather, making the leather hard, causing the leather fibers to break easily. If there is heavy sweat and moisture in the shoes, dry them in a place with the sun on your back.

2) Leather shoes should be protected from oil immersion. The general rubber sole of various leather shoes is afraid of oil, because the general rubber will expand and twist after being soaked in oil, although the oil resistance of plastic soles and rubber and plastic soles is strong, but it is not suitable to soak in oil, so as not to cause glue leather shoes to open the glue. Do not add too much grease to the upper leather, so as not to migrate the grease to the upper and sole and affect the bonding strength.

3) Leather shoes should avoid contact with acid and alkali. The durable acid and alkali corrosion resistance of leather is not strong, especially not resistant to alkali corrosion, alkali can not only destroy the coating layer on the surface of leather shoes, but also burn the fiber tissue of leather.

4) Leather shoes should be moisture-proof and mildew-proof.

5) After the sole and heel are worn, they should be sent to the repair department for repair as soon as possible.

Tips for the care of your shoes.

1. Buy shoes that fit well, otherwise the shoes are easy to deform and hurt the feet.

2. Clean your shoes regularly and wipe them with a damp cloth; Never slam with a brush.

3. If the shoes are wet, stuff newspapers to maintain the appearance of the shoes, and let the shoes dry naturally, avoiding direct sunlight or high temperature baking.

4. Shoes should avoid contact with solvents, acids, alkalis, oils and other corrosive substances.

5. Maintain more than two pairs of replaceable shoes and let the shoes take turns to rest.

6. Casual shoes and sandals should not be used for intense exercise.

New shoes are not coated with shoe polish, so to protect new shoes, rub them on the seams of the soles before wearing them to enhance the waterproof effect. The upper is smeared with a layer of oil, which can make the hard upper shiny and soft. For a long-lasting glow, apply fresh milk to the desired effect.

Whether or not to do the above steps has a lot to do with the speed of shoe aging. After the shoes are wet by rain, they should be disposed of immediately to prevent them from deforming. First of all, wipe the white film with water, and then use a fabric with good water absorption to absorb the moisture on the surface of the shoes.

Put newspaper or toilet paper inside the shoes and replace them to absorb the moisture completely. When it is dry, it should be put in the last to prevent deformation. Then put it in a ventilated place to dry in the shade or use a hair dryer to assist drying from the inside of the shoes at a low temperature, and do not use high temperatures that will cause cracks in the upper.

Once completely dry, carefully brush with emulsifying shoe polish. 1. If the leather shoes are found to be frosty, you can use gauze or cotton to dip a small amount of warm water to wipe the white cream on the upper, put it in a ventilated place to dry, and then wipe a small amount of shoe polish to preserve. 2. Leather shoes should be cleaned with a soft cloth or soft brush, and maintained with special shoe polish to avoid the reaction between shoe polish and the leather surface, resulting in discoloration or damage to the leather.

3. Do not rub shoe polish or water brushes on the nubuck leather upper, apply special detergents, brush lightly in the direction with a brush or use special rubber shoe powder to clean it. 4. The oil leather upper is soaked in oil, and the upper can be cleaned with a dry cloth or special products during maintenance. 5. Banana peel decontamination method:

Take a few banana peels and use them to wipe the oil stains on the leather shoes, which can make the leather surface clean and fresh, because the banana peel contains tannins, which can remove oil stains.

1. Before applying shoe polish to the leather shoes, clean up the dust and mud on the leather shoes and wipe them with a clean rag.

2. Then apply a circle of shoe polish on the leather shoes, and you can wipe more on the more worn positions, but the amount should not be too much.

3. After the shoe polish is applied, use the prepared soft cloth to apply, and be sure to ensure that the shoe polish is evenly applied, and the leather shoes will be wiped clean.

1. Use a shoe brush to brush off the dust of leather shoes;

2. Use a discarded toothbrush to evenly wipe the shoe polish on the entire shoe, if the heel is also the same color, also wipe the shoe polish;

3. After the shoe polish is completely absorbed by the leather shoes, then use a little force and quickly use the shoe brush to stretch the surface of the leather shoes;

4. Wipe back and forth on the shoes with a soft cloth, a bit like polishing, until the shoes are shiny.

1. Wipe off all the dirt and dirt with a cotton cloth, especially the heel and sole:

If your shoes are really dirty, you can use a detergent: with a damp cloth (squeeze out the water.

Wash with detergent, then wipe dry and set aside to dry. Many shoe manufacturers recommend using a maintenance agent to maintain the leather to keep it soft, elastic and moist, and to prevent the upper from drying out. Some conditioners contain detergents that remove the original shoe polish;

2. It is best to put in the shoe last.

Shoe shine later;

3. Confirm that the color of the shoe polish matches the color of the leather shoes

Natural color refers to the use of light-colored leather shoes. It is best to buy shoe polish of the same color together with your shoe purchase.

4. Squeeze the shoe polish evenly on the leather shoes

Shoe polish keeps the leather moist, making it soft and elastic without clogging pores so that the leather can breathe. Shoe wax is a good way to polish leather shoes, but it can clog pores and dry out the leather. Do not use liquid shoe polish.

5. Use a clean cotton cloth to coat the shoe polish in a circular manner, and wipe evenly

Too much shoe polish doesn't add shine and takes longer to absorb and dry.

Tip: After polishing the shoe polish, you can add a few drops of water to the upper, then dry it and polish it normally.

Boston. Trick (danfrom boston): Wet your shoes with a damp sponge, the extra moisture will help the upper shine.

Militaryshine: Heat shoe polish with hot water to make the leather more absorbable, then use an old t-shirt.

Polished (polished shoes are so shiny that many people ask the author if they are fake leather).

British tip: Polishing antelope (or sheepskin) with oil content can make it brighter and remove excess shoe polish.

6. Dry the shoes (about 10 minutes);

7. Use a horsehair shoe brush to polish the leather shoes, and then use a clean muslin cloth to further polish them.

8. If needed, use liquidsole and edge dressing to oil and polish the hem and sole.

After the correct shoe polish, you need to use a cloth sassafras. The correct way to hit shoe polish is:

1. First of all, use a towel to remove the dirt and dirt on the soles of the shoes, and use a brush to carefully brush off the dust between the seams and the laces.

2. Use the cotton cloth rolled on your fingers to spread some stain remover and wipe off the dirt on the upper and the shoe polish with a little force. In this way, the new shoe polish is shiny.

3. Apply an appropriate amount of shoe polish on the leather surface of leather shoes, evenly apply shoe polish on the surface of shoes with a soft cloth, if you need to make leather shoes shiny and have good waterproof performance, you can apply a thin layer of oily shoe polish.

4. Brush with a brush, which can make the nutrients of the shoe polish penetrate into the leather, and finally polish it with a soft cloth, and also ensure that the leather shoes will not stain the pants. The softer the cloth, the brighter it becomes.

Leather shoes need shoe polish and maintenance to last as new, and I really want to help you look forward to it.

Leather shoe polish is not allowed, to use high-grade leather oil, I usually use Amway's 70 yuan can be used for several years.

In my experience, I finished the ** leather shoes, the effect is particularly good, and it is very convenient, and it will not get black hands! I hope it will be useful to you, the following is a more professional method, I think it's quite troublesome, hehe. And before you buy shoes, you have to think about the future care situation!

Otherwise, it's yourself who will be in trouble.

Care: You can wipe with a clean, damp cloth (preferably without dripping).

2.Rubbing leather: After the leather is glossically colored, the cowhide or sheepskin that has been rubbed and treated by rubbing is uneven and rubbed, and it is normal to have a slight discoloration.

Care: You can use the corresponding color of shoe milk or colorless shoe milk to care, do not get wet.

3.Waxed leather: The surface is waxed and polished, and the wax luster shines.

Care: It is recommended to use shoe wax to avoid rain and water.

4.Oily skin: The skin is thick, with a layer of oil on the surface, and there are scratches with a fingernail.

Care: You can wipe it with a clean soft cloth or take care of it with colorless shoe lotion (water-based), do not get wet.

5.Polished leather: It is made of polishing the surface of cowhide, and the luster it emits is the luster of the cowhide itself, which is naturally bright.

Care: You can wipe with a clean, damp cloth (preferably without dripping).

6.Nubuck leather: It is made of the front of the cowhide by a special process to remove the luster and roughness of the cowhide.

Care: You can use a soft brush to gently brush off dust, or use special scrub powder and scrub cleaner.

7.Suede (suede): It is made of the reverse side of cowhide, and the leather fiber is longer than that of frosted leather, and the feel is rougher.

Care: Gently brush off dust with a soft leather brush, or use a special skaw peel cleaner.

8.Cracked skin: The leather surface will naturally crack during wear.

Care: No special care is required, avoid water and oil.

9.Snake cowhide: It is a cowhide coating using printing, mucosa technology, and then rolled embossed into a snake scale pattern.

Care: Can be treated with colorless shoe polish.

If you find that the color of the shoes has become lighter, then you need to apply oil, and you must not use ordinary shoe polish! Wipe with a dry cloth or a special oil such as shiny upper wax, and do not use regular and liquid shoe polish.

1.Polishing your shoes frequently. Wipe off the dust on the surface of the shoes with a clean soft cloth, and then apply oil evenly to wipe them off.

2.When it rains or snows, try not to wear oily skin. Waxed leather shoes, or can be protected by shoe covers.

3.After the leather shoes are damp, they should be dried in a ventilated and dry place, avoid exposure to the sun and drying, and do not put the toe toe side upright on the ground, but should be placed straight to avoid deformation.

4.Do not encounter oily, acidic, alkaline and sharp substances to prevent corrosion damage.

5.Coloured leather shoes (including white shoes) should be worn with particular attention to avoid touching sewage, dirt and tea stains. Wrinkles in coloured leather shoes (including white shoes) during wear are not a quality problem.

6.When storing leather shoes, they should be wiped clean and oiled, placed in a dry place, and should not be squeezed to cause deformation. After storage for a period of time (especially in the mildew rainy season), it should be taken out for ventilation and re-wiped to prevent mold.