Why is my Longines watch two or three hours slower every night

1. Insufficient activity energy, resulting in insufficient kinetic energy.

For automatic mechanical watches, if you wear them normally for 8 hours a day, the normal amount of exercise can support the time, generally speaking, the watch can walk normally for 36 hours, if you don't wear it often, the duration of the goods is not long, that is the reason for the lack of energy, if there is enough energy every day to support the rotation of the watch and there is a big deviation, you need to go to a special institution to check what the situation is.

Second, the watch is magnetized.

Generally, when the watch is close to the magnetic field, such as placing it next to a speaker or computer at home, it is easy to disturb the normal walking of the hands, resulting in slow walking or stopping walking. If your watch is getting slower and slower within a year of buying it, it may be that the watch has come into contact with magnetic items, you can go to the repair center to demagnetize, and then please avoid the contact between the watch and the magnetic items.

3. The oil of the movement is dry.

If you wear it for a long time, it may be that the oil in the watch movement is dry, the rotational friction resistance of each part becomes larger, and the watch will slow down, and you have to oil the movement, otherwise it will cause the parts to be worn out for a long time.

My Longines watch slows down for two or three hours every night, which means that there may be no power inside, and if it is a mechanical watch, it may be that the mechanical watch is not enough.

Why is your Longines watch not two or three hours slower at night, maybe your watch is not adjusted according to Beijing time, you have to adjust Beijing time.

Your watch slows down for two or three hours every night, oh my God, this watch is too inaccurate. I think if you buy it at the counter, you can go to the counter to see it, and if you buy it online, I think you should go to the counter to check if it is true.

Hello, if the watch slows itself down for two or three hours every night, then there must be something wrong with the internal structure of the watch, you can go to the place where the watch was repaired and ask.

It should be a matter of time to go, and you can readjust it.

You can calibrate the watch to a certain extent, adjust the time to see if there will be problems with the watch, if there is still a problem, you can only repair it.

Longines watches sell for two or three hours a night, it may be that there is a problem with your watch or that it is not automatic.

Why is that watch two or three hours a night fast? If it's two or three hours a night, it's hard to explain the process, and if it's fast at any time, it's probably an advantage.

Why does your Longines watch sell for two or three hours a night? Is the battery low for the first time? The second is to see if the machinery you came from has broken down, you can call them to repair it.

The battery in the watch is dead, and you change it to a new battery, and it basically keeps up with the normal rhythm.

If it is an electronic watch, the battery may be dead, and if it is a mechanical watch, it may be mechanically faulty.

Is it mechanical or quartz watches It is normal for a mechanical watch to be slow.

You must be out of power.

Hello friend, if your Longines watch is genuine, then go to the manufacturer for after-sales maintenance and testing.

Your Longines watch may be sold for two or three hours a night, it may be that there is something wrong with its movement, you can search online for a while, or ask some experienced uh repairer to say that they can give you a reasonable explanation.

That means that there is a problem with your Longines watch, which belongs to you to steal it or has a mechanical failure, you can go to the after-sales service to take a look and check what the problem is.

Why didn't my Longines watch sell for two or three hours at night, this cocoa early after-sales service to see.

Hello dear I am happy to answer the answer for you: Why is Longines mechanical watch always two minutes slow down for a few days? Kiss for you to find out that the amount of activity is insufficient, resulting in the automatic watch winding is not satisfied, causing the watch to slow down or stop.

It is possible that the Longines watch walks very slowly every day because of improper use by the user, and the user's lack of activity causes the automatic watch to be unwinded, causing the watch to slow down or stop. People who are less active should not wear this type of watch. The watch is close to a magnetic field, such as a TV or mobile phone, which causes the watch to run inaccurately.

Whether it is a mechanical watch or a quartz watch, as long as their error is within the range of the above two standards, we can say that the watch is qualified. If you find that the error of your Longines watch exceeds the error standard, you need to go to a professional watch repair service center for repair as soon as possible.

The speed of a mechanical watch is mainly determined by the pendulum frequency, usually the larger the pendulum amplitude, the smaller the pendulum frequency, and the smaller the pendulum amplitude, the greater the pendulum frequency. Generally, watches rely on the retraction and release of the hairspring to control the swing, which is the basic principle of adjusting the speed and slowness. If the hairspring is longer, the swing will increase, the frequency will be smaller, and the watch will be slower; Conversely, the more the pendulum frequency increases, the faster the watch will be.

2. The structural problem itself, due to the gravitational force of the earth, the offset of the horizontal position and the vertical position will produce a displacement, the mainspring is tightened from the top to the relaxation, the torque is unbalanced, and the external temperature, magnetic field, vibration, etc., even if the mechanical watch increases some frequency, it is impossible to achieve the accuracy of the quartz electronic watch. 3. The effect of the magnetic field, after the hairspring is magnetized, the circle between the rings is only shown when wearing, there is a sticky or short-term lap, especially in the façade, the hairspring will hang down due to its own gravity, and the shaking of the arm will intensify its radial movement, and the magnetic energy utility is shown because of this. 4. The balance of the balance wheel and the hairspring, especially the balance wheel, the balance wheel and the width of the balance wheel are very bad, and the absolute brightness will cause the pendulum to be bright under a certain swing, highlighting the precision change of the surface.

Here's the solution: You can find a compass to diagnose the watch.

It is normal for a Longines mechanical watch to be one minute slower every day. It is larger than a quartz watch, but it is due to the quality of the production and the fact that the movement inside the watch is susceptible to the influence of gravity. Usually mechanical watches are calculated in seconds of daily error, while quartz watches are calculated in seconds of error in months.

Reasons why mechanical watches slow down:

1. The length of the hairspring that can be retracted and released will increase the swing amplitude, the swing frequency will be smaller, and the watch will be slower; Conversely, the more the pendulum frequency increases, the faster the watch will be.

2. The structural problem itself, due to the gravitational force of the earth, the offset between the horizontal position and the vertical position will produce a displacement, the mainspring will be tightened from the top to the relaxation, and the torque will be unbalanced, and it will be affected by the external temperature, magnetic field, vibration, etc.

3. The effect of the magnetic field, after the hairspring is magnetized, the circle between the rings is only shown when wearing, there is a sticky or short-term lap, especially in the façade, the hairspring will hang down due to its own gravity, and the shaking of the arm will intensify its radial movement, and the magnetic energy utility is shown because of this.

4. The balance of the balance wheel and the balance spring, especially the balance wheel, the balance wheel is very poor, which will cause the balance wheel to highlight the precision change of the surface under a certain swing.

How it works: The mainspring is the part that provides energy to the watch, which is wound inside the barrel. The mainspring is tightened by a milled groove on the shaft.

The square groove of the bar shaft is driven by the upper bar mechanism. The watch can travel for about 36 to 50 hours without a reload. The energy provided passes through the wheel group, which reduces the transmission force in the same proportion and increases the number of turns.

It is normal for a mechanical watch to go fast for three minutes a month is equivalent to walking 6s faster every day. The daily error of the mechanical watch is within 30s, which means that there is no problem with the watch type.

Mechanical watches do not need to be replaced by batteries, and can be used for a long time with regular maintenance and oil washing.

Mechanical watches are different from quartz watches because of the different principles, which means that mechanical watches are not as accurate as quartz watches. Compared with quartz watches, mechanical watches have a larger error due to the quality of the production and the susceptibility of the movement inside the watch to the influence of gravity. Usually mechanical watches are calculated based on the number of seconds of error in the day of Minling, while those of quartz watches are calculated in terms of the number of seconds of error in months.

Summary. It is possible that the Longines watch goes very slowly every day because of improper use by the consumer, and the user's lack of activity causes the automatic watch to be unwinding, causing the watch to slow down or stop. People who are less active should not wear this type of watch.

The watch is close to a magnetic field, such as a TV or mobile phone, which causes the watch to run inaccurately.

Hello, it's a pleasure to serve you, I've seen your problem, I'm analyzing and summarizing the data for you, please wait a while, and immediately return to the wheel to close the game and return to your state Sui.

It is possible that the Longines watch walks very slowly every day because of improper use by consumers, and the user's activity is insufficient, resulting in the automatic watch winding and not guessing the car full, resulting in the watch going slowly or stopping. People who are less active should not wear this type of watch. The wristband is close to the magnetic field of the spike, such as TV, mobile phone, etc., resulting in inaccurate timekeeping of the watch.

Do you have any other questions? After 24 hours of the order talks, the automatic trouble is over, if my help to you, the liquid will treat your praise, thank you

Summary. Note: It is not advisable to manually adjust the watch between 9 o'clock and 3 o'clock on the watch. Because this period is the running time of the calendar function, manually adjusting the watch is easy to cause gear damage, so avoid this time, and wait for the calendar to jump before manually adjusting the watch, otherwise it will cause wear and tear on your watch.

Suggestion: Adjust the calendar to the previous day, pull out the crown to the second position (fully unplugged), rotate the crown all the way up (clockwise), wait for 24 hours after the clock hand turns the calendar to automatically jump to the correct date, and then continue to adjust the correct time today.

Hello dear <>

The reason for the slow date of the Longines watch may be that the consumer uses it improperly and causes the early imitation, and the user's activity is insufficient, resulting in the dissatisfaction of the automatic watch winding, resulting in the watch slowing down or stopping. People who are less active should not wear this type of watch. The watch is close to a magnetic field, such as a TV or mobile phone, which causes the watch to run inaccurately.

Adjust the time in this way: the dial is facing you with the front facing you, the hood is facing up at 12 o'clock, and the right hand rotates the crown, which is pulled out and divided into two positions (note the force). First gear (slightly pulled out) high purity:

Thumbs up to turn the crown (clockwise) -- Adjust the date Thumb down to rotate the crown (counterclockwise) -- Adjust the Tuesday gear (fully pulled): Thumb to turn the crown to adjust the time.

Note that the watch should not be manually adjusted between 9 o'clock and 3 o'clock. Because this period of time is the running time of the calendar function, it is easy to cause damage to the gears if you manually adjust the whole watch, so avoid this time and manually adjust the watch after the calendar jumps, otherwise it will cause wear and tear on your watch. Recommendations:

First, adjust the date to the previous day, pull out the crown to the second gear (fully pulled), rotate the crown all the way up (clockwise), and after 24 hours the hour hand turns, the date will automatically jump to the correct date, and then continue to adjust the correct time today.

Abnormal.

If the watch has been worn for a long time may be the cause of the accumulation of dust, you can go to the watch store and ask the master to clean the movement, which may be more expensive, the speed of the mechanical watch is related to the daily wearing environment, such as temperature, winding strength, usual angle and so on. It is said that when not in use, the front side and the back side are not the same, so it is more particular.

If the time is not long, it may be a problem with the setting of the watch, there is a small needle that can be adjusted in the movement, go to the watch shop to adjust, before that, you only need to calibrate the time of the watch one day in advance, how long is it slow, tell the watch repairer to adjust it, a day fast or slow within 30 seconds is a national standard, not a quality problem.

Precautions for mechanical watch maintenance.

It should be noted that a full mainspring can usually keep the watch running for about 30 hours, and the longest can even be eight days or more. If you want the watch to run non-stop, you need to pay attention to the winding at all times, but overwinding the spring can cause damage to the watch, so it is usually recommended to only wind the spring once a day, and some people even recommend winding it at the same time every day, because the temperature at different times will affect the clockwork, so that the watch can be better maintained.

In order to ensure the good operation of the hand-wound movement and the accuracy of the watch, it is recommended to have a complete overhaul every 4 to 5 years, and to choose a designated service center. If the watch is of the complication type, it is recommended that you have it completely overhauled every 3 to 4 years.

The standard daily error of the mechanical watch is within plus or minus 30 seconds, and the slower minute per day has exceeded this range.

The disadvantage of a normal mechanical watch is that it will be a little slower every day, and the brand watch will be better, and the quartz watch will not have such an error.

Abnormal, even if the error of the mechanical watch is too large, and it is a little famous for Longines, the normal mechanical watch day error is stipulated within plus or minus 30 seconds, you have a bit of an error, it may be too long without maintenance, or there are other problems, it is recommended to send it back to the merchant after-sales inspection and maintenance.