The phone can t be turned on after the water is in, what should I do if the phone can t be turned on

Dizzy... Your internal circuit board is burned out.

If the phone gets into the water, it must not be turned on.

Only take it to the maintenance department and open it after repair.

to turn on.

If you don't believe me, take a look.

Did you remove the battery immediately after picking it up and didn't try to turn it on before the phone was dry? Have you taken it apart and blown it? Disassemble and blow again, and don't blow a place at high temperature for a long time, and you must make sure to dry it all before turning it on again, otherwise it will cause a short circuit!

Is the battery okay? Dried up? Have you tried changing the battery?

The battery should also be ensured to dry before being put in the mobile phone to turn on, otherwise there is a possibility of burning the battery.

Also, if you put the battery you are sure to put in, if it still can't be turned on, then you use direct charging to see if there is any response!

Good luck.

1.If you pick up the phone after falling into the water and turn it off, it seems that your phone will be broken when it is blown under the fan, because when the phone is turned off, in fact, as long as you press a button casually, the water will flow with the circuit board, and the circuit board is estimated to be broken.

2.If you just unplug the battery and blow it, then you blow it a little longer, try to dry it as much as possible, and try again. Generally, it will not break if you take the battery off and dry it directly.

It's not just that it's dry and out of water.

Wherever the water flows, there is water quality.

caused by short circuits and other problems.

Turn on your phone and wipe it with the water, and then use a hair dryer to blow it.

Remove water. 1. Dry in time.

We found that the phone had fallen into the water, and we scooped it up in time. Quickly wipe off all moisture from the body. Remove the soft rubber case of the mobile phone, because the soft rubber case will get stuck in the water.

2. Shut down. If this is the phone is turned on, we have to turn it off in time. Avoid powering up the phone and burning the internal parts.

If it's an old-fashioned phone, we can remove the back cover, the battery, and everything that can be obtained. This avoids electricity and allows moisture to flow faster.

3. Water absorption. Use a cotton swab or paper towel to quickly drain the water in the earphone hole and the water in the charging hole. Remember not to turn on the phone, don't turn it on with the idea of trying to break the phone, and it will be burned out by your boot.

After the phone gets into the water, take out the battery immediately, and then open the case and use a hair dryer to blow it clean.

4. The method of removing water is also to put it in a ventilated place or put it in a rice bag.

After all the water absorption we could do, we still couldn't turn it on. Keep your phone in a ventilated place or put your phone in a rice bag for 3 days (because rice is very absorbent).

5. If you still can't turn on the machine after the above method is over, that is, the motherboard is burned out and needs to be replaced.

Try leaving your phone in a cool, dry place for a few days.

Try to turn on the phone after it is completely dry, if it can't be turned on, it is recommended that you take the phone to the after-sales service for processing.

Water ingress on the phone. Whether it falls into a basin of water or is covered with water, it is a serious problem. If it is more serious, it is likely to lead to the direct scrapping of the mobile phone.

Unfortunately, if you are using a Huawei mobile phone, in order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

After the mobile phone is flooded, in order to reduce your losses, it is recommended that you deal with it according to the following methods: 1. Please try to place the mobile phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of the mobile phone. 2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

If your phone has a removable battery, remove the battery immediately). 3. Please take out the SIM card and microSD card. 4. Please bring your phone to the Huawei Customer Service Center for testing and processing as soon as possible to avoid unnecessary losses (data may be lost during after-sales maintenance).

Hello. The phone can't be turned on after being flooded. It is possible that the system is malfunctioning.

Personally, it is recommended not to make it yourself, let alone charge it. Go to the official customer service center of the mobile phone brand for a comprehensive inspection and repair. The official customer service is both safe and secure.

Some share. Wish. Thank you.

If the water is less, you can use a hair dryer to blow it slowly, it should not be a big problem to turn on, if the water inlet is large, it is best to take it to the repair shop for inspection and maintenance.

As soon as you turn on the mobile phone with water, the electronic components inside will be burned out, so don't turn it on, wait for the water to dry, and then repair it.

If you are using a vivo mobile phone, bring the mobile phone to the vivo customer service center as soon as possible and let the maintenance engineer conduct a professional inspection.

Customer service center address: enter the vivo official website vivo**app--my--service outlets after-sales outlets--select provinces and cities to inquire about the customer service center, it is recommended to call the customer service center in advance to confirm the relevant matters and understand the working time to go, so as not to delay valuable time.

The mobile phone can not be turned on when it falls into the water because of the short circuit caused by the water inside the mobile phone, in order to prevent the mobile phone from being burned out, do not frequently try to turn on the high Zen noise. 1. Place the mobile phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of the mobile phone. 2. Take out the SIM card and memory card, and do not move or shake the mobile phone frequently, so as not to spread moisture inside the mobile phone.

3. Take your mobile phone to the mobile phone customer service center for testing and processing as soon as possible to avoid unnecessary losses.

The mobile phone can not be turned on after water ingress, indicating that the water has caused the mobile phone motherboard to corrode and short circuit, this branch is best not to operate again, send it to repair in time, disassemble the machine to see what parts are burned out, light can also repair the boy Duan Fu, read the reputation of serious may be scrapped.

Don't turn on your phone before it gets water, dry the water with a hair dryer first, and then put it in the sun for a day before turning it on, and try again.