Is it normal for solid wood furniture to crack and deform? How to deal with it?

Cracking of solid wood furniture is a normal phenomenon, after the furniture is cracked, you can mix alum and confetti together, add water, and then melt under the action of high temperature, and then put it into the cracked furniture. It's time to stick it up.

This is not a normal phenomenon, if this happens, you should find the manufacturer and let the manufacturer compensate you.

What kind of furniture cracking and deformation is a normal phenomenon; You can pour glue into the container, add old newspaper, alum, and water to it, and then slowly pour it into the crevices, sandpaper and smooth it, and then apply a layer of lacquer of similar color.

Now many friends in the decoration of the house, when buying furniture, they like to buy solid wood, because they feel that such furniture is more environmentally friendly, and the life of use will be a little longer, although it is slightly more expensive, but other conditions are better, so there will still be a lot of people competing to buy. But there are also many people who find that after buying solid wood furniture home, with a few years, he will have cracking, some people do not know, he also thought it was a quality problem, but it is really not like this, solid wood furniture cracking is a very normal phenomenon, it does not belong to the quality problem. <>

The reason why he will crack is because our climate change is too great, so such furniture will have thermal expansion and cold contraction, then it will cause cracking. Of course, there are also some that are not due to changes in climate, but because the user did not do a good job of daily maintenance work in the later period. He likes to crack things, mainly because it's made of wood.

There will be a dryer process when making furniture, and the moisture content in it should be controlled in a more appropriate range. But when we use these furniture later, we may not be able to control it so well. <>

We don't say that all solid wood furniture cracking is a normal phenomenon, and some are quality problems, but most of them are normal. If he only has a slight idea, then we don't need to worry too much, we can go to the store and buy a 502 glue, drip it along its crevices, and when it dries out, scrape off the outer layer of glue, then we can't see any traces. But if the gap is relatively large, the glue must not have any effect, and a professional master must be asked to repair it.

It's best not to do it casually at home, because it might make it ugly. <>

Furniture produced in areas with high humidity, even if the dried wood will absorb moisture in the air during the furniture production process, and then transported to the north for use, especially in the northern winter, the air is dry, the indoor temperature is high, and the furniture is prone to dry cracking, so when buying furniture, consider the origin of furniture as much as possible in line with the local climate, and humidifiers can also be added indoors in northern winter. Solid wood furniture.

In the northern region (Qinling, Huai River.

To the north), it is easy to crack, the climate in the north is dry, and many families use heating to bake in winter, and solid wood furniture is more prone to cracking. It can be said that temperature and humidity are the decisive factors affecting the cracking, swelling and deformation of furniture. The volume of dry wood shrinks, the volume of wet wood expands, and when the temperature and humidity are unbalanced, it will cause cracking and deformation.

The climate is different, the moisture content of solid wood.

There are also differences, which are related to geographical differences, the moisture content of solid wood in Beijing is generally around, and the moisture content of its furniture is in4%;The moisture content of southern timber is even higher, at 14%. Therefore, when solid wood furniture from the south is used after it is transported to the north, cracking will occur.

Reason 3: Improper use. And then cracking.

If the moisture content of the log is not well controlled, there will be quality problems such as cracking and deformation in the later stage. After the furniture is produced, the moisture content of the wood determines whether the shape and material of the furniture will change again. Therefore, it is very important to control the moisture content of solid wood furniture, and the balanced moisture content will not crack and deform due to environmental factors such as sunlight, overcooling, and overheating.

Cracking of solid wood furniture is caused by shrinkage of water and wind, generally solid wood furniture construction will be much better when drying, brush paint back cover, solid wood furniture cracking is not much of a problem, commonly used wet rag sassafras to maintain air humidity.

And the temperature should not be too different, the temperature difference is too large, it will crack, cracked furniture can find a beautician.

Fu can repair it, and the general furniture beautician can fix this problem.

That's because the temperature inside the house is too high and very dry, so the wood will crack if you are in such an environment for a long time.

It's because of the nature of wood, these woods are very bad, and it takes a long time for them to crack, which is also a normal phenomenon.

Because solid wood furniture is not ventilated in the room we decorate, then they will cause dampness, and when the weather is hot, it will crack, which is a normal phenomenon.

It may be that the climate is too dry, and when the climate is dry, the solid wood furniture will crack.

This is a normal phenomenon.

Causes of cracking of solid wood furniture.

The phenomenon of cracking of solid wood furniture is first of all the reason for the climate, the alternation of the four seasons of the year, it will inevitably lead to a greater or decrease in humidity in the air, at this time a lot of solid wood furniture will appear hot and cold contraction, resulting in cracking.

When workers process wood, cutting corners may also cause cracks in solid wood furniture, as well as improper use and maintenance, and cracking will also occur.

How to grind the cracking of solid wood furniture.

Don't worry about the cracking of solid wood furniture, some remedial measures can be done after cracking, which can make solid wood furniture intact. First prepare some waste newspaper, cut it into crumbs, then add an appropriate amount of alum to the paper scraps and stir well.

Pour the confetti and alum mixture into a prepared container, add a small amount of water, and stir again. The container is placed on a simmer and boiled into a paste, and the boiled paste mixture is filled into the cracks of the solid wood furniture and allowed to air dry.

Cracking of solid wood furniture is the original condition, and it is best not to put the furniture in a wet and cold place for application. Cracking of all-solid wood furniture: generally occurs in northern regions; Deformation of all solid wood furniture:

It generally happens in the southern region to see the sea. The primary problem that leads to cracking deformation: the type of wood, the new Chinese furniture is very rare to crack the problem, generally all European classical, contemporary, etc., the commonly used wood is not used through the secondary drying treatment, and the wood moisture content is unstable.

Painting process problems: the paint is too thin, there is no stronger maintenance wood, resulting in the wood and the atmosphere contact, long-term exposure or unreasonable application of medical furniture will destroy the furniture ......Cracked wood is too conventional, because the ambient humidity and ambient temperature of the gas are different, so the wood will also be accompanied by heat expansion and cold contraction, but the boiled wax is much better. And the selection of mahogany furniture furniture will be much stronger than other furniture in terms of disposal.

Many processing techniques will cause cracking, such as wood joints that are not strengthened after jointing, such as adding nails or falcons to the internal structure to strengthen the tensile strength after splicing. The wood itself is cracked, and many processing techniques will add a layer of Aosong board to the surface layer and then do the sealing paint processing process, but the Aosong board obviously does not have the grain of the solid wood board, but there is nothing wrong with the crack prevention. This is also a matter of processing technology.

At the same time, some wood is born with the root cause of cracking, such as solid wood and insufficient flexibility, such as ash wood is harder and less flexible, while beech wood is more flexible, and the wood texture itself is fine. As long as it is of course cracking, it is not easy to affect the normal application under normal conditions, so please do not panic.

Solution Talking about simplicity, but you also have to have special tools, it is not easy to have this kind of technical professional special tools at home, such as sanding sandpaper, sawdust particles, paint, which are not usually at home, especially eyebrow filling, it is difficult to adjust to the tone you want if you are not an expert. This is a technical professional industry, and the field is called Furniture Beauty Instructor. Solid wood furniture is solved by laser cutting and drying in the production process, and it is inevitable that there is an imbalance of thermal stress or part of it is not released thoroughly, which is related to the production and processing of the processing plant and the level of production and manufacturing, but it is difficult to test.

Second, cracking of solid wood furniture is related to improper application by consumers, such as placing it in an area exposed to natural light, or being too close to an electric heater in winter and cooling air conditioning outlets in summer, which may lead to cracking of furniture.

Third, the furniture produced in the southern region is not in line with the application of soil and water in the northern region, and the weather in the northern region is too dry, and the balance of wood moisture content is also easy to cause. Solid wood furniture should be protected from long-term exposure to sunlight, and long-term exposure to the sun will easily lead to cracking of solid wood furniture, so general solid wood furniture should be prevented from being placed near the window. Therefore, solid wood furniture should pay attention to maintenance, the probability of good cracking is much smaller, to prevent direct sunlight, ** air conditioning mouth blowing, when dry, often wipe with a wet rag.

When the furniture is used for a long time, the surface layer should be wiped with wood wax oil every year to seal the surface layer and avoid excessive water outflow.

Why does solid wood furniture crack? How can I remedy it on a daily basis? Solid wood furniture will crack after a long time, because long-term use will cause wear and tear to cause changes in wood, in daily life can buy wood glue repair.

Wet or dry and other environmental factors, each region has different weather characteristics due to the factors of geographical environment, but the moisture content of solid wood furniture in each region is different, such as the northern region generally controls the water content of 12%-13%, and the southern region is about 14%, so you can understand why some southern solid wood furniture is transported to the north after cracking and other phenomena. If there is already a large crack then it will be more troublesome to remedy, first you need to cut some crumbs, you can use books and newspapers that you don't usually use, and then add water with appropriate alum, boil it into a paste over low heat, and we can wait for solidification in the crack gently. It usually cools completely after 24 hours, and we just polish it lightly with fine sandpaper.

It is because you don't usually pay attention to maintenance, so it will crack, and you should put a sticker or paint it in your daily life.

Real wooden furniture is prone to cracks, mainly because of its material material, because a lot of it is made of selected wood, and there is a drying process when making it, basically keeping its humidity within a reasonable range. But later due to the different use environment, it will lead to deformation and cracking on its surface and inside, cracking may be a quality problem, or it may be a normal phenomenon.

The humidity of real wood furniture can not only be maintained by maintaining the proper air humidity in the room, but also by regular waxing to lock the humidity of the wood, prevent the furniture from drying out and deforming, and make the furniture shine again, beautiful as new. But remember, don't wax too often. Regular cleaning is the most important point of maintenance, but when wiping, it is best not to wipe with a cloth that is too wet, especially for old mahogany furniture, and it is recommended to dust it with a feather duster to achieve the best cleaning effect.

The surface of solid wood furniture is only slightly cracked, don't worry too much, you can use 502 glue to slowly drip along its gaps, and then scrape off the glue on the surface after the glue is dry.

Of course, the surface of the furniture cannot be damaged, so that the gaps can not be seen without any traces. There are relatively large gaps on the surface of solid wood furniture, and it is not possible to use 502 glue, so it is best to ask a professional master to repair it, because the surface needs to be removed, and a series of processes such as waxing and polishing are also needed. The wood shrinks and the moisture expands.

Wood drying, shrinkage and moisture expansion are important factors in furniture design and production. When the moisture content of the wood is lower than the fiber saturation point of the wood, the size of the wood changes according to the moisture absorption and desorption of the wood.

The durability, stability and structural strength of furniture are affected by shrinkage and swelling. After the cracking of solid wood furniture, cracks will appear, at this time if we do not deal with it, the surface will be worse if it is beautiful, at this time we can use some useless books or newspapers, cut into petty bourgeois confetti, and then put in an appropriate amount of alum, add water to boil it into a puree, embedded and pasted in the cracks of solid wood furniture, once completely dry, it will be very firm.

Cracked furniture can be glued with some solid glue. Furniture should not be scrubbed with a damp rag in daily life, and it should not be exposed to the sun.

Try not to let the solid wood furniture touch the water, do not let the solid wood furniture suffer from the sun for a long time, wipe the solid wood furniture clean, put it in a cool and ventilated place, you can apply some protective oil.

Be sure to pay attention to moderation, but also pay attention to remove the dust on it, and try to avoid being exposed to strong light. You can also refill the wax.