Is the solid wood door easy to crack and deform? If you buy a solid wood door, what kind of quality

In general, it will not deform and crack within a few years. The finished solid wood door is theoretically closed by paint, and the internal structure is relatively dense and not easy to deform and crack. But if you don't maintain it well, such as excessive air humidity, serious damage to the appearance, and deformation of the building door opening, the solid wood door may be deformed and cracked.

Weather, environmental humidity and temperature, improper use, improper maintenance are the main reasons why solid wood doors are easy to crack, and this can be avoided by paying attention to its use and maintenance and adjusting the air temperature.

Now many people like to install solid wood doors at home, but they are prone to cracking during the use of solid wood doors, which is very annoying, in fact, there are many reasons for this situation, mainly weather changes and environmental humidity, because in different seasons, the air dry and humidity are different, it will affect the density and performance of the solid wood door, and it will make it crack. To avoid this, it's best to keep the room ventilated and keep the solid wood doors dry.

1. Improper use is easy to crack

If the solid wood door is not used properly during the installation and use, it will be prone to cracking, especially some more expensive solid wood doors, after installation and use, we must pay attention to its use, can not use violence to open the door repeatedly, and close the door can not let it receive sunlight for a long time, otherwise the solid wood door will be damaged, easy to make it crack and deform, which will affect its service life.

2. Improper maintenance

Improper maintenance is also one of the important reasons for the cracking of the solid wood door, in the usual use process, if the solid wood door is wiped with alcohol or other detergents containing corrosive substances, it will make it crack, let the radiator close to the solid wood door when sending heating in winter, or often splash water on the surface of the solid wood door when doing hygiene, it will make the solid wood door crack, which will affect its normal use.

Third, such as to prevent the cracking of solid wood doors

There are many reasons for the cracking of solid wood doors, if you want to prevent this situation, you must start from many aspects, after the installation and use of solid wood doors, you must ensure the humidity of the environment, try not to let the air be too humid, and do not let anyone contact the solid wood door for a long time, not to mention using violence to open and close the solid wood door, so as to prevent it from cracking, in addition to paying more attention when choosing solid wood doors, try to choose those high-quality solid wood doors made of logs. In the process of its installation and use, it is necessary to carry out effective maintenance on him, and every few months he should be cared for with a relatively high concentration of solid wax, which can not only improve its gloss but also prevent it from cracking.

The moisture content of the solid wood door is not well controlled, so it will be easy to crack, to choose the right moisture content of the solid wood door, the maintenance is not in place will also be easy to crack, if the door is often exposed, it will be particularly easy to crack, be cautious when choosing the door, do not often expose the door, do not spray the door directly with water, so as to prevent cracking.

It's because it's under pressure, it's under pressure, it's because it's fermenting inside the door, and it's because the moisture inside is evaporating, so it will cause the solid wood door to crack. If you want to prevent such a situation, then it is necessary to regularly maintain and care for the solid wood door.

Weather, humidity, temperature, improper use, improper maintenance, etc. are all easy to cause cracks in solid wood doors, so daily maintenance measures should be taken to prevent this situation.

It is likely that the temperature is relatively high, it may also be because the material of this door panel is not particularly good, it may also be because the humidity is heavier, or it may be affected by the force.

Due to the use of wood processing, the wooden door has a large plane area and few fixing points, so it is one of the decorative wood that is easy to deform and crack. Because the deformed wooden door will directly lead to the sound insulation, airtightness and beauty of the house, so understanding the deformation of the wooden door has become a particularly important decoration knowledge before decoration. Natural wood is affected by various factors in the growth process, resulting in uneven wood density (sunny side, density of growth rings, core material and sapwood), when the wood is planed, it changes the balance of internal stress, causing the wood to deform and crack.

The moisture content of the wood is also another major cause of the deformation of the wooden door, with the reduction of the moisture content during use, the internal stress of the wood will be slowly revealed, which will eventually lead to deformation and cracking.

The main means to prevent wood deformation is to use mechanical and technical methods to change the internal stress and moisture content of wood, and the effective and common method of changing internal stress is to finger joint pine or fir (these two types of wood have less internal stress). The way to change the moisture content of the wood is to perform secondary drying (natural drying followed by steam drying). The quality of the processing technology in the production of wooden doors, such as the pressure, temperature, balance layer, gluing and other factors of the press will directly affect whether the wooden door is deformed and cracked during use.

Because the solid wood door is a wood fiber material, the fiber is like a sponge, there is a little space to absorb water, and then it will expand, or shrink due to lack of water, and the wooden door is spliced out of different wooden boards, very few whole wooden boards are processed, each board has a gap or different water absorption will be deformed, where I am also made of wooden doors, if you don't understand, you can try to ask me.

First, the wooden door is deformed.

1.Due to the influence of the climate, the expanding force of wood or paint causes the product to deform.

2.Deformation of the product caused by the high moisture content of the wood.

3.Problems caused by prolonged exposure to the sun.

Treatment: Minor deformation can be treated by pressurization, and serious deformation needs to be returned to the factory.

Second, the wooden door cracks, shrinks, bumps.

1.Cracking of fir wood, due to climatic reasons or severe knocking during installation, pressurization may lead to cracking (generally door sleeve line).

2.Due to the thermal expansion and contraction characteristics of wood, the door sleeve line and the door sleeve line between the door sleeve line and the door sleeve line will cause a certain shrinkage joint due to the influence of humidity and temperature.

3.During handling, the product is accidentally hit and causes pits, or the door corners are damaged during installation.

If the area is large or the damage is severe, the wooden door also has a professional beauty repairer who can turn decay into magic (not every merchant is a free service, it is best to inquire whether this service is included when ordering).

3. Wooden door bubbling and degumming.

It is caused by high temperature or uneven gluing or shrinkage of wood during processing.

Treatment: If it is not very serious, the beautician can re-polish and repaint it on site. If it cannot be repaired or the bubbles continue to spread, it is recommended to place an order to redo it.

1. Weather reasons

The raw materials for the production of wooden doors are dehydrated before production, and after the completion of production, to the installation to the customer's home, and then to use, this process may go through several seasons, but the weather in each season is different, there are cold and hot, dry and wet, so it is made of solid wood, after this series of changes, the wooden door will be easy to crack.

2. Regional issues

If the region where you are located is the south, and the brand that gives you the wooden door is northern, which produces regional differences, and the climate of the north and south is different, itself belongs to a relatively dry environment in the north, and the south is relatively humid, and the wooden door is affected by the humid environment, which will swell or crack.

3. Improper use

Some friends do not have a good understanding of the solid wood door after installing the door, and do not pay attention to some details in the daily use process of China, such as often using a wet rag to scrub the wooden door, or opening and closing the door too hard, long-term exposure to the sun on the wooden door, etc., will cause cracking of the solid wood door.

Fourth, there is no maintenance

In the process of using the solid wood door, it must be maintained frequently, but improper maintenance will also cause the wooden door to crack, such as improper practice is to scrub the wooden door with alcohol or other reagents; When heating in winter, there is a heat source close to the wooden door; Water splashes on the surface of the wooden door when mopping the floor or doing hygiene, the window is opened in spring and autumn, and the indoor wind is too strong, etc., these reasons will accelerate the cracking of the wooden door.

Cracking of solid wood doors is a very bad experience for many users and manufacturers. Most of the users summarize the cause of the cracking as a "fake" product, or a problem with the manufacturer's production process. So, let's introduce whether it is normal for solid wood doors to crack.

1. Is it normal for solid wood doors to crack?

Normal, in fact, as long as it passes the standard strict drying treatment, the cracking is usually not very significant, and even if there is cracking, it is a particularly small crack, which generally does not affect the use. The water content of wood is very large, which is a key cause of the deformation of wooden doors, and over time, the water content becomes less, and the internal stress of the wood will be slowly exposed, and finally cause deformation and cracking.

Second, the cause of the cracking of the wooden door.

1. The moisture content of solid wood.

After the door is manufactured, the moisture content of the wood determines whether the style and material of the door will change again. Therefore, it is very important to control the moisture content of the solid wood door, and the controlled water content will not be cracked and deformed due to factors such as the sun shining and the temperature being too cold or too hot.

2. Caused by weather.

The moisture content of solid wood doors is 1%-2% less than that of specific air uniformity. Because of the different geographical locations, the air humidity in various cities in China is also different, so the water content demand for solid wood doors is also different. The air equilibrium water content in the south is 14%, while in the north it is as high as 12%-13%.

Therefore, when some wooden doors in the southern region are transported to the northern region, there will be cracks.

3. Improper use.

If you let the solid wood door be exposed to the sun in the place near the window, or wipe it with a towel that is not wrung out by Duan Sen, and close the door with too much force, so that you kick the door open, Dulazhou will cause damage and cracks to the solid wood door frame.

4. Transportation damage.

In the process of transporting the wooden door, it is inevitable that there will be collision and friction, and it will be even more painful if it is violently transported.

No, the quality of some solid wood doors is still good, you can take a look at the wooden door of Aiweisi, or you can.

No, look at the wood and dry humidity.

As long as it is not damp, it generally not.

1. The log door is made of pure solid wood material, and if it is not degreased, the door is easy to shrink and crack. And the degreasing process is not in place, which will also cause cracking of the log door. When the log door is used for a period of time, if there are problems such as cracking and deformation, the sound insulation and sealing performance of the log door will be greatly affected.

Since each type of wood contains a certain amount of resin, if a certain process is not taken to discharge the resin in the wood, the wood will be deformed after being processed into the finished wooden door. Now there are also equipment on the market that can reduce the cracking of log doors, but this kind of equipment is generally high in cost and complex in the production process, so it is rarely used.

When using the log door, consumers should pay attention not to hang excessive items on the door to avoid damage to the door body; When opening or closing the door, do not use too much force or open the angle too much to avoid damage; When removing stains on the surface of the wooden door, wipe it with a soft cotton cloth, and it is easy to scratch the surface with a hard cloth. When the stain is too heavy, you can use a neutral cleaning agent, toothpaste or special cleaning agent for furniture, and wipe it dry immediately after removing the stain; Pay attention to the edges and corners of the wooden door not to rub too much, otherwise it will cause the edges and corners of the paint to fall off.

2. Solid wood lacquer door is what we often call the solid wood composite door, the inner wood specification of the door frame of the solid wood lacquer door is small, and the moisture content of the door frame is also uniform, and then 6 cm of Aosong board is pasted on both sides of the door leaf, and the modern composite technology is used for production and processing. Because the AOSONG board attached to the door leaf is an artificial board, it allows the hardness, density and temperature of the door body to change with the change of the environment, so it can prevent deformation and cracking due to the change of external temperature, and is more durable and economical than the log door.

It can be seen that the painted door can change with the change of the environment, so as to prevent deformation and cracking caused by the outside world. The log door must be degreased process, if it is not in place, it will cause the log door to crack easily. No matter what kind of wooden door, there will be some problems, as long as it is not a big problem, consumers can maintain the service life of the wooden door through daily maintenance.

If the problem cannot be solved, it is best to let the wooden door after-sales personnel come to repair and solve the problem more professionally.