How do you clean a wall blackened by radiators? Now the market has wood and non smoked radiators?

Radiator smoked wall reason: Generally, the location of the smoked wall is at the back or upper part of the radiator. Because the radiator heats the surrounding air, and then the hot air rises, driving the flow of dust, smoke and particles in the air, so that impurities are attached to the walls and surfaces above or near the heating and air conditioning, and it will turn black after a long time.

How to deal with the problem of radiator fumigation wall:

1.You can try to clean and mop the home, especially under and near the radiator, to reduce dust, so as to eliminate the material on the smoke wall and solve the root problem;

2.Add a shroud to the heater;

3.Cover the radiator with a simple fabric as a cover;

4.Place a towel or cloth next to the wall on top of the radiator;

5.Set aside a small baffle on the radiator;

6.Go to the building materials supermarket to buy a corner rack for heating and install it on the top and side, this corner frame can also put things, the best of both worlds.

In fact, the principle of the last five methods is to avoid the concentrated upward movement of the hot air flow by diverting the gas, and disperse the flow direction of the hot air, so as to reduce the accumulation of dust and other dust on the wall.

So how to solve the problem of smoked walls, first of all, look at how your wall is handled. In general, it can't be wiped off, unless you use a wipeable wall paint. If it is scraped porcelain, it is not easy to deal with, and if it is latex paint, it can be re-sprayed.

The reason for wall plaster, you can paint some wall paint.

Radiator smoked wall? No way? My friend's radiator doesn't smoke ......

This should be a problem with the paint on the walls of your home

The reason why the wall is blackened is that the convection of hot and cold air above and below the radiator, the hot air is above, the cold air is below, and the particles suspended in the air are slowly attached to the wall above the radiator, and after a long time, the wall will become black. x0d x0a First: Use radiators with a slight smoke effect, such as die-cast aluminum radiators, steel plate radiators, copper convection radiators or underfloor heating.

x0d x0a Second: Add a shield or light yarn to the top of the radiator. This in turn prevents floating particles from entering the wall.

The Satoria radiator recommends using tin foil, placing tin foil above the radiator, and covering the part of the wall close to the radiator with tin foil, which has two advantages, one is: placing the wall is blackened, effectively blocking the particles suspended in the air, and placing it attached to the wall; The second is that with the presence of tin foil, it will prevent the heat emitted by the radiator from being absorbed by the wall, thus greatly increasing the indoor temperature, killing two birds with one stone.

What should I do if the radiator blackens the wall? These two methods can be stopped, and the walls of the house are in vain for ten years.

There is a certain distance between the installation of the radiator and the wall, and the blackening is not actually too high heat to blacken. This situation is due to the high heat above the radiator, and because the hot air is light, this area will form a suction force on the surrounding air, which will absorb the particles and impurities in the surrounding air and cause wall pollution. Therefore, it is best to wipe the installed radiator frequently during the use season, and do a good job of indoor air quality, which can avoid this situation.

The easiest way is to make a radiator hood (cloth) and cover it on top of the radiator.

Radiators are to be scrubbed often!

1. Don't worry too much about the radiator blackening the wall, you can use a hair dryer to blow the wall and then gently scrub it with a brush or wipe it with a semi-dry cloth.

3. The reason for the radiator to smoke the wall: the hot air near the wall above the radiator rises, the surrounding cold air is supplemented by convection, and the suspended particles in the air are slowly attached to the wall above the radiator, and after a long time, the wall will become black.

After the heating is turned on, the wall is blackened, which is unsightly, and the black and white walls look very uncomfortable and annoying. So, how do you prevent radiators from blackening your walls? Let's follow the golden flagship flag brother to find out.

Radiator smoked wall conventional solution.

1. Install a radiator mask for the radiator.

Although it is said that the radiator mask can solve the problem of radiator fumigation, but in fact, this method is not recommended, on the one hand, the current heating shape is basically beautiful and does not need to be blocked, on the other hand, the radiator mask will also seriously affect the heat dissipation effect of the radiator.

2. Put a towel or cloth on the radiator.

This method has some effect, but it still has its drawbacks. The towel has poor air permeability, which disperses the heat flow, so that the air flow of dust is also dispersed, and the wall cannot be blackened in a concentrated manner. And this method also has its shortcomings, that is, it can only prevent the middle from being blackened, and cannot prevent the outermost wall from being smoked.

3. Install a storage baffle above the radiator.

This method of installing the object baffle can completely protect the wall above, and it is well protected for this part of the wall. However, the disadvantage is that the dust in the air cannot be filtered out, the dust just changes the direction of flow, and it is blocked by the board and flows outward along the edge of the board, which eventually causes the wall on the outside of the board to be blackened, and the top of the wheel side of the board family will also be obvious.

4. Use an air purifier.

Turn on the air purifier in the heating area, which can effectively filter out the gray dust in the air, and the rising air flow will not change the flow direction, and there will be no dust, and the wall will naturally not be smoked. Although this method is more effective, the number of whole indoor radiator groups is large, and it is easy to take care of one or the other, and it also increases the additional cost.

Fumig-proof wall radiator solutions.

In view of the problem of radiator fumigation wall, in fact, many radiator manufacturers have invested in relevant research and development to solve, as an aesthetic radiator who has been engaged in technology research and development innovation, naturally there is also a unique anti-fumigation wall radiator solution.

Aesthetic Spike Radiator has successfully independently developed the first domestic product that integrates the triple function of "environmental protection, safety and anti-fumigation wall" - "anti-fumigation wall" series copper-aluminum composite radiator, the radiator increases the anti-fumigation wall buckle cap design, and the unique anti-fumigation wall principle design, which greatly effectively eliminates the yellowing and blackening of the wall, and the protection of the wall is almost perfect, which is the best choice for the taste group. At the same time, it has a large waterway, large fins, large heat dissipation, stable and elegant design, through the audit of tens of millions of processes, Dahua to meet the needs of modern high-end people's home life.

Radiators are almost one of the must-have products for heating in the north, almost throughout our winter! Therefore, if you want to have a better anti-smoke wall effect, in addition to choosing the right radiator, you should also pay attention to cleaning during daily use to reduce dust and bacteria in the air, so as to enjoy a better warm life.

In fact, strictly speaking, the radiator itself is not smoked on the wall, and the current wisdom of the wall seems to be because the radiator heat dissipation drives the dust near the radiator to rise, and it is formed by attaching to the wall, so pay more attention to cleaning and pay attention to indoor humidity. Rubens Heating hopes to help you.

You can put a wallpaper on the wall of the radiator or you can put some wooden boards to block it, as long as the heat is separated.

The solution is to move the radiator away from the wall, or put a protective layer on the wall, or wrap the radiator in a box.

In fact, we can make a radiator cover for the radiator, which can not only improve the aesthetic effect, but also solve this problem, and the cost is not very high.

Why are walls easily blackened by radiators? How to avoid it? Home decoration is most afraid of buying products with potential quality problems, or there is no problem, when used with other products, there are problems, such as formaldehyde detection meets the standard laminate flooring and parquet, normal use, home formaldehyde may not exceed the standard, but if the floor is laid under the floor, it will release formaldehyde in winter, and then close the doors and windows of the house and windows, the formaldehyde content of the indoor air will exceed the standard harmful to the human body.

Dense floors and underfloor heating are used separately, but such problems will come together.

Is there a potential problem with another commonly used heating method, radiators? Is it clear about the following **? Yes, the Smoke Wall!

The heating seller will only tell you how the heating effect awaits your relationship. There are almost no sellers who will take the initiative to tell you. Why heat black walls?

What is the solution? The above die-cast aluminum radiator is still stated forward, reducing the black wall. No other steel and copper-aluminum composite heating elements are used.

Below is my own home from a few years ago, with copper-aluminum composite heating panels installed in the living room, and the walls above are visibly smoked. This is when the heating is installed, which seems to be very good and does not take into account the potential problems of black walls. It had been smoked on the wall for three years, so it took me thousands of turns to find one.

The walls are repainted again, but after a few years, the walls will be smoked and it is a real headache.

Why is heated to smoke black wallHeating fumigation black wall is determined by its structure and heat dissipation. The radiator is mainly aimed at the heat of the air flow, the air around the radiator flows upwards, the radiator blows on the wall of the radiator, it will turn black. Let's make a detailed analysis from the structure and installation case.

The radiators are usually empty between each interior and the paper, and the upper and lower hoods are also retained, and the flow holes are reserved according to the radiators installed by the state, and the walls are close to the walls.

A gap of 5 cm or more is maintained, and the lower surface is not less than 12 cm, and the intended purpose of this is to enhance the convection effect of heating heating. In this way, in front of the heating, there is a convection channel between the interior and the wall. We know that hot air is very dense and it floats.

Therefore, when he is warm, the cold air comes from the surrounding, the front, after the cavity is in the gap between the walls, it is heated and then flows out, so that the air flows upwards from the radiator, forming a chimney effect, if the home is not very clean, the dust will continue to adsorb the air convection on the walls of the radiator, time has always been the effect of the walls that we see.

The main reason is that in the past, the heating pipes were painted with silver paint, and the silver paint would be stained on the wall when it was heated and volatilized, as long as the heating pipe was covered, it would not be like this.

Because the color of the wall is very bright, the radiator will generate a lot of heat, and this heat will change the color of the wall, so use dark heating when making radiators.

Because the radiator will produce some gas when dissipating heat, it is easy to blacken the wall, and you can put some wallpaper on the wall to avoid the wall being blackened.

Close to the wall of the radiator, easy to be blackened, many users will think that it is because of the water quality of the radiator, in fact, the water in the radiator is specially treated softened water, the role is to protect the pipe, the softened water is alkaline, will cause slight corrosion to the human body, but will not blacken the wall. Because the air convection will absorb dust, the heat dissipation in the radiator is good, the convection of cold and hot air is obvious, and when there is more dust, it is easy to produce the phenomenon of the wall being blackened, so as to avoid the radiator being blackened: you can place a decorative poster above the radiator for easy wiping at any time, or you can cover the upper part of the radiator with a wet towel.