How to avoid radiators fumigating the wall, are there any good suggestions?

How to prevent radiators from smoking? All it takes is three moves!

<>1. Frequent cleaning: The radiator smoked wall is caused by dust and microorganisms in the air, so we should clean frequently, reduce the content of dust and microorganisms to a minimum, and focus on cleaning the cracks of the radiator and the wall on the back to ensure that it is clean and will not turn yellow and black;

2. Install anti-smoking board: the amount of radiator smoked wall has been for a long time, so radiator manufacturers design and produce anti-fumigation board for this problem, and we can install it on the wall behind the radiator when the radiator is installed; Notice.

3. Anti-fumigation wall radiator: In fact, when we choose the radiator, we can choose the anti-fumigation wall radiator, which is to change the direction of air flow by changing the internal structure of the heat dissipation wing, so as to achieve the purpose of not fumigating the wall;

Families who use radiators for a long time will find that there will be a black mark on the wall next to the radiator, which will form a great contrast with the surrounding white wall, affecting the overall appearance of the room, and it is difficult to remove it. There are also many people who have reacted to buying a radiator for the smoke-proof wall, and there are some black marks on the wall, so how can the radiator not smoke the wall, let's follow the golden flagship flag brother to find out.

Why do radiators smoke walls?

If you want to solve the problem of radiator smoked wall, you need to understand what its principle is. Friends who have paid close attention to the location of the radiator will find that the location of the wall is generally behind or above the radiator.

This is because there is a lot of dust in our room that we can't see with the naked eye, and when the radiator heats the surrounding air, the heat will drive the dust to float upward.

At this time, the wall around the radiator will be exposed to dust in a large area, and the surface of putty powder, latex powder, wallpaper and other surfaces used indoors is uneven, which is easy to accumulate dust, and the wall will be "smoked" black over time.

The solution to the problem of radiator smoked walls.

Method 1: Wipe the walls frequently.

Because wall blackening is a process of accumulation, not overnight.

Therefore, you can wipe the wall with a rag to clean up the dust on the wall before heating.

After heating, you can wipe down the walls once a week to remove the dust that covers the walls due to the rise of heat. Of course, this is based on the premise that the wall is stain-resistant, otherwise it is easy to stain the wall.

Method 2: Cover with a towel or other cloth.

Covering a towel or other cloth over the radiator can effectively absorb the dust driven by the rising heat and protect the wall from being blackened. However, this method also has certain drawbacks, which affect the overall appearance and heat dissipation of the heating.

Method 3: Install a radiator with an anti-fumigation wall.

This method can be said to be a one-and-done method. Installing steel panel radiators can effectively reduce the blackening of the wall by radiators. The large fin design has a better heat dissipation effect.

When choosing, you can also choose according to the interior decoration style, which is more beautiful. Moreover, it is very suitable for use in the south, and the matching degree of wall-hung boiler, air energy, and electric boiler is 99%.

There are 3 ways to prevent radiator smoke on the wall, which can be used according to the actual situation. Here I would also like to remind everyone: when choosing radiators, we must choose a powerful manufacturer, in order to ensure the heating effect and use effect, and the product is more secure.

Heating is the main heating tool for most homes in the north, it can bring warmth to people in the cold winter. But when the winter is over, you'll notice some black stains on the white walls, and some of the black stains are caused by the radiators. So, what are the tips to prevent the warm reed gas sheet from smoking the wall?

1. If you want to prevent the radiator from smoking the wall, it is best to do the hygiene at home and mop the floor clean.

3. In addition, you can also put a cloth on the radiator near the clear place of the wall, which can also play the effect of preventing the radiator from smoking the wall.

When the radiator is not used in winter, it is necessary to ensure that the radiator in each room is heated and the heating process cannot be interrupted.

Set a board above the heater to block the updraft.

Custom-made panels can grow a little longer than the heater, blocking the heater directly above and on the sides. This method can have the effect of completely protecting the wall above, and for this part of the wall, it is not said that it is well protected. However, his disadvantage is that he can't filter out the dust in the air, the dust just changes the direction of flow, and it is blocked by the board, flowing outward along the edge of the board, which eventually causes the wall on the outside of the board to be blackened, and the top of the board edge will be obvious.

A special air purifier is used above the heating to filter dust from the air.

The air purifier for heating that can filter dust is used above the heating to filter out the dust in the air, and the rising air flow does not change the direction of flow, but there is no dust, and the wall will not be smoked. It doesn't blacken the sides or top like you would with a board on top. This method is certainly a bit more advanced than the others.

As an important form of home heating, installing radiators has become the choice of most families. However, in the process of use, many users have encountered a very distressing problem: the radiator has only been used for two years, and the white wall of the home is blackened, which especially affects the beauty of the home decoration.

How is a heating fumigation wall caused? What are the solutions to heating fumigation walls? Let's follow the golden flagship flag brother to find out.

During the use of the radiator, the hot air will rise, driving the flow of dust, smoke and particles in the surrounding air, resulting in impurities attached to the wall near the heating.

For the walls that have been blackened and yellowed by the radiator, you can use toothpaste or baking soda to clean them, or you can use sandpaper to remove the black marks on the surface. You can also use a hair dryer to blow on a blackened wall for a long time, and after the dust has been blown away, use a softer brush to apply detergent to clean up the dust. However, these are only emergency measures to alleviate or even solve the problem.

For the walls that have been blackened by the smoked bridge, Jin Jin offers you a few tips.

1. Position skills.

The floating dust and heat flow of the heating can be avoided in a conspicuous position in the home, such as the bottom of the bay window, under the window and other areas, so that the dust impurities will directly adhere to the glass, and it can be recovered by wiping it frequently.

2. Add a shroud.

It is not a heating hood, the heating hood will greatly hinder the normal heat dissipation, Li Chai Bridge is already a relatively outdated method, and it cannot be covered during the heating season. The shroud is similar to the air conditioner shroud, changing the direction of airflow and impurities, so it is not easy to accumulate on the wall.

3. Increase humidity.

Put a moist towel on the top of the heater, so that the heat is dissipated, but the dust will be directly adsorbed on the towel, so as to avoid being blackened.

4. Replace the radiator.

Technological innovation, now there are anti-fumigation wall series radiators on the market, through technical design not only to solve the disadvantages of domestic heating fumigation wall, but also to dissipate heat more quickly and efficiently.

In just over a year, the walls of the house have been blackened! The wall above the radiator looked like it had been smoked. What's going on?

"Smoked walls" is a problem that all heating users may encounter. Why do radiators smoke the wall, and what is the solution to the heating smoke wall? Let's follow the golden flagship flag brother to find out.

First of all, let's talk about the reason why the radiator will blacken the wall: Generally, the location of the wall is behind or above the radiator, because the radiator heats the surrounding air, and then the hot air rises, which will drive the dust, smoke and particles in the surrounding air to flow, which causes impurities to be attached to the wall near the heating, and after a long time, there will be blackening.

Watching the blackened walls make you very old! If you want to see how to solve it on the Internet, you can see it like this!

Most of the friends who have used radiators are troubled by this. Most of these solutions are from the perspective of controlling floating dust!

What to do if the radiator is blackenedThe second way: bring a hat to the radiator!

For another example, the third type has a partition above the heater, which seems to look a little better than a hat.

The fourth way is to use a semi-dry rag to wipe off the blackened place on the wall, if the radiator is used for too long, it is difficult to wipe off with a wet rag, you can use sandpaper to rub it after the heating period, scrape off the original blackened surface, and then repair it with paint.