-
How to remove yellowing stains on the outside of the stainless steel pan:
1: Add water to the pot and boil, then add some pineapple skin, heat for more than 20 minutes, take it out after cooling, the dirt sticking to the bottom of the pot will naturally disappear, and you can remove the dirt that is difficult to wash without much effort.
2: If the bottom of the pot is stained with a thick layer of charred meat, you can pour one-third of any kind of vinegar into the pot, add two-thirds of the proportion of water (must cover the charred part), cover and boil for 5 minutes, soak overnight, and gently scrape with a cream knife or spoon to remove the charred bottom.
3: In the case of not waiting for the pot, after soaking in warm water for a period of time, it can achieve twice the result with half the effort, and it can be cleaned with ordinary cleaning methods! Give it a try! If you wait to use the pot, put water on it, and heat it for a while, it can be easily cleaned.
4: Put a few slices of apples in a pot and add water, then put it on the fire for a while, the dark spots will be removed immediately.
5: With incense ash (mosquito coil, sandalwood can be), first dip the bottom of the pot with a little water, then sprinkle the dry incense ash evenly on the bottom of the pot, and then rub it slowly with a steel wool ball, the effect is very good.
-
Here's how to do it:
1.Wipe the stain with a 15% acetic acid solution (15% tartaric acid solution is also acceptable), or soak the stained part in the solution, and rinse it with water the next day.
2.Moisten the stain with 10% citric acid solution or 10% oxalic acid solution, then soak it in concentrated salt water, wash and rinse the next day.
3.If white cotton and cotton blended fabrics are stained with rust, take a small grain of oxalic acid (available in pharmacies) and put it on the stain, drip some warm water, rub it gently, and then rinse it with water. Pay attention to the operation to be fast and avoid corrosion.
4.If you have fresh lemons, you can squeeze out the juice and drop it on the rust stain and rub it by hand, repeat several times until the rust stain is removed, and then wash it with soapy water. Or soak the rusty area with boiling water, coat it with sour milk, and then apply soap, or wash it clean.
-
Hello, the macula on the stainless steel pan needs to be scrubbed with a stainless steel cleaner to remove the macula.
-
You can use stainless steel wire to stick the dirt powder and wipe it off vigorously.
-
The treatment method of the stainless steel pot is as follows:Tools Raw materialsBowl, tomato paste, white vinegarDish soap
Step 1: First prepare a bowl, add two spoons of tomato paste, two spoons of white vinegar, and one spoonful of dish soap and stir well.
Step 2: Spread the stirred sauce evenly on the yellowing part of the stainless steel pot.
Step 3: After applying, let it stand for 10 minutes, wipe the stainless steel pot with a scouring pad, and you can remove the yellow stains.
-
1. Wet the fine sandpaper and repeatedly polish the black spots on the stainless steel pot until polished; 2. Cut the used toothpaste skin, and then directly wipe the black spots on the stainless steel pot with the remaining toothpaste skin; 3. Wet the scouring pad with water and dip it in some detergent, and gently wipe it after heating the stainless steel pot to easily remove the dark spots.
How to remove dark spots from stainless steel pansStainless steel pots will appear dark spots after being used for a long time, mainly because stainless steel transfers heat quickly. If you light the fire first and then pour the oil, the oil will stick to the hot pan and become a scorched spot. The dark spots on the stainless steel pan are not only difficult to wash, but also affect the health of the body in the long run.
The best way is to wipe the pot dry and pour in cooking oil, then light the fire and shake the oil well. Serve the dish while the oil is still smoking, and then increase the heat and stir-fry after the dish. In this way, the dish is not muddy, and the stir-fried dish is also more delicious.
If the black spots on the stainless steel pot are black and hard, they can be removed by slowly sanding them with fine sandpaper; Alternatively, you can use orange peel dipped in powder and gently wipe the surface a few times to restore its shine. However, it's a good idea to wash and dry the pan after each use so that stains don't build up and become dark spots.
-
To clean up the black spots inside the stainless steel pot, you need to prepare: hawthorn and water.
1. First take out the stainless steel pot, see the figure below.
2. Put the prepared hawthorn into the stainless steel pot.
3. Pour water into the stainless steel pot.
4. Bring the water in the stainless steel pot to a boil.
5. The water in the stainless steel pot needs to be kept for ten minutes after boiling.
6. Pour out the water in the stainless steel pot below.
7. Rinse the stainless steel pot with clean water below.
8. Finally, the black spots in the stainless steel pot will be cleaned up.
-
To clean up the black spots inside the stainless steel pot, you need to prepare: hawthorn and water.
1. First take out the stainless steel pot, see the figure below.
2. Put the prepared hawthorn into the stainless steel pot.
3. Pour water into the stainless steel pot.
4. Bring the water in the stainless steel pot to a boil.
5. The water in the stainless steel pot needs to be kept for ten minutes after boiling.
6. Pour out the water in the stainless steel pot below.
7. Rinse the stainless steel pot with clean water below.
8. Finally, the black spots in the stainless steel pot will be cleaned up.
-
Here's how to remove the yellow stains from the stainless steel pot:
Method 1: Add about half a pot of water to the cauldron, and put some pineapple skin, then wait for the water to boil, put the smaller pot of yellowed stainless steel pots into it one by one, heat and boil on the stove for a period of time, about 10-20 minutes, and wait until it cools down, you can take it out, you can find that these pots are as bright as new.
Method 2: Add a little vinegar to the pot, then add water to the place that has just been covered to the yellow, heat the pot, you can wash it off or pour a little rice into the pot, add a small amount of water, cover the yellowed place, let the rice ferment naturally, and then wash it.
Method 3: Add water to the pot and boil, then add a small amount of dish soap, cover the pot, leave it overnight, and then scrub it to remove.
Precautions
The reason why stainless steel pots are yellowing is because the general composition of stainless steel is a combination of iron, chromium and carbon and other elements, and stainless steel for household products can be divided into three grades: -10.
Among them, 430 stainless steel: steel + more than 12% chromium can prevent oxidation caused by natural factors, called stainless steel, the code name in JIS is 430, so it is also called 430 stainless steel, but 430 stainless steel can not resist oxidation caused by chemicals in the air.
Because there are more and more acidic chemicals in the air, 430 stainless steel will still oxidize due to unnatural factors after not being used for a period of time, which is often called rust, and the yellow color on the stainless steel is because of the oxidation reaction of the surface of the stainless steel or the tempering color due to high temperature.
-
To clean up the black spots inside the stainless steel pot, you need to prepare: hawthorn and water.
1. First take out the stainless steel pot, see the figure below.
2. Put the prepared hawthorn into the stainless steel pot.
3. Pour water into the stainless steel pot.
4. Bring the water in the stainless steel pot to a boil.
5. The water in the stainless steel pot needs to be kept for ten minutes after boiling.
6. Pour out the water in the stainless steel pot below.
7. Rinse the stainless steel pot with clean water below.
8. Finally, the black spots in the stainless steel pot will be cleaned up.
-
To clean up the black spots inside the stainless steel pot, you need to prepare: hawthorn and water.
1. First take out the stainless steel pot, see the figure below.
2. Put the prepared hawthorn into the stainless steel pot.
3. Pour water into the stainless steel pot.
4. Bring the water in the stainless steel pot to a boil.
5. The water in the stainless steel pot needs to be kept for ten minutes after boiling.
6. Pour out the water in the stainless steel pot below.
7. Rinse the stainless steel pot with clean water below.
8. Finally, the black spots in the stainless steel pot will be cleaned up.
-
Hello, you can use a scouring pad dipped in some detergent powder to rub directly on the scorched spots, and you can generally wipe them off. If it is such a thick and hard scorched spot, it will not be wiped clean with only the detergent. Prepare a piece of such fine sandpaper and dip it in water to grind on the scorched spot.
Be careful not to grind too much to avoid rubbing the pot noodles. The correct way to do this is to hold the focal spot tightly and rotate it in a circle until it is polished.
In addition, for thick and hard stains, it is also rubbed with fine sandpaper, which can be wiped clean and shiny. If you wash and dry after each use, there is no greasy or dirt. Dip the orange peel in the powder and gently rub it on the surface a few times to restore its shine.
When dealing with the dirt left on the pressure cooker, you can cut the used toothpaste, keep the toothpaste on it, wipe the surface of the pressure cooker directly with the toothpaste skin, and then rinse the toothpaste and dirt together with clean water.
Prepare a basin of water and a scouring pad on the stovetop, moisten the scouring pad with clean water, and wipe the stainless steel pot with the damp scouring pad during the heating process, then you will find that the oil stains on the outside of the stainless steel pot are easily wiped off. Apply the toothpaste evenly to the grease stain of the stainless steel pot, and wipe the grease with a steel wool ball after the toothpaste has dried a little, and the stubborn oil stain will become easier to deal with. Although the effect of using this method is obvious, it will damage the coating on the surface of the stainless steel pot, so it is recommended to use it when using stainless steel.
When we use stainless steel pots, the outside of the pot will always be blackened by fire, and it is very difficult to clean up, and if we are not careful, we will get it everywhere. In fact, there is no home, it will be cleaned every time, and it will only be thoroughly cleaned once after a long time. At this time, the blackness on the outside of the pot is more serious, and there may be other substances. >>>More
Stainless steel is durable and easy to use, and has become the most commonly used material in pots and pans, and there are many stainless steel pots on the market. The stainless steel pot is made of stainless steel inside and out, and under the firing of the open flame, there will be layers of black ash on the outside of the stainless steel pot, and if the black ash is not cleaned up in time, it will have a certain impact on the use of the stainless steel pot. However, it is not so easy to clean and remove the black ash of stainless steel pots made by open flames. >>>More
The common fault of the pneumatic ball valve of Tyco valve is that the actuator does not act, the actuator acts, but the torque is not enough, the pneumatic ball valve can be opened or closed, but the action is slow, the actuator action is normal, but the valve does not act, the actuator action is normal, but the valve switch is not in place. These problems should be checked and solved in a timely manner so as not to delay the normal progress of the work. The following is a small series detailing the causes and solutions of common faults of pneumatic ball valves. >>>More
The production and processing of stainless steel words need to go through a number of strict processes, and its production is more difficult in metal words. First of all, the stainless steel word is to be cut, combined with wire cutting, laser cutting and water cutting. Then weld with a welding torch, then grind and wrap the edge, and at this point the glyph is basically out. >>>More
Industry insiders believe that when consumers buy coffee tables, in addition to considering personal preferences, other points can be referred to: color shade: and calm, dark and dark wood furniture is suitable for larger classical spaces. >>>More