The iPhone suddenly has no sound, what happens when you put on headphones and can hear the sound?

The Apple phone has no sound, see if you have muted the external playback or set it to vibration plus mute mode, if it is turned to then the phone has no sound.

When plugging in headphones, there is sound because the volume of the headphones is inconsistent with the sound of the microphone and the external sound. You can check it out in detail.

Looking forward to your satisfaction and wishing you a happy life!

All of a sudden, your iPhone is silent, but you can hear it when you put on your headphones. Then it's your phone, its speaker is broken, so the extended sound is gone, but the phone comes with headphones. You can hear the sound.

You can try the external mode first, that is, try it with a speaker, or an earpiece to see if it can still produce sound? If you can make a sound. That could be an issue with the audio.

If you can't hear the sound, it may be a problem with the speaker, and you can go to Apple's after-sales service or professional repair shop to repair it, which should not be a big problem.

Restart it and try it, check whether the volume is adjusted too low, if not, it may be a problem with the cable, you can go to the after-sales service center to check and repair....

Open your phone's settings.

Click on "General".

Click on "Accessibility" to turn on "**Noise Cancellation".

Scroll down, tap to "Audio Call Mode" and click to select a speaker.

If the above methods cannot be solved, it is recommended that the mobile phone be sent to a repair shop for repair, and it is estimated that the cable will be replaced.

It may be that there is a problem with the external amplifier, go to the maintenance department to repair it.

When the headphones are not plugged in, the headphone logo is also displayed, and the headphone jack may be broken. If it doesn't show it, the horn is broken.

There must be a problem, you still have to go to the after-sales service to ask for clarification. Apple phones are very expensive, don't get them yourself. If it breaks, we'll have to spend money to fix it.

I also encountered this situation once, there is no sound on the mobile phone, you can hear the sound with headphones, the volume display has always had a headphone logo, and then turned on and turned off a few times. I don't know why.

The Apple phone has to be plugged in with headphones to make sound.

1. First of all, check whether the Bluetooth function is turned on and the ** device connected to the Bluetooth is connected, and the sound output will switch to the output of the wired headset after inserting the headphones, so it is recommended to turn off the Bluetooth and then try to turn it on.

2. It should be a micro switch for the headphone jack.

The failure is caused by the earphone has been pulled out, but the switch has not been disconnected in time, you can use a toothpick to poke the jack twice to let the micro switch recover.

3. You can try to quickly plug in the earphones several times to see if you can make the earphone logo disappear, or restart the phone.

4. If you have tried all the above methods and cannot help you solve the problem, you can directly take the mobile phone to Apple's after-sales service personnel for repair, which is also the best solution.

The above is the solution to the sound problem when the Apple phone is plugged in with headphones, hope.

This should first check the sound settings, see if the volume is turned down or turned off, but also look at the mode of the mobile phone, the volume of different modes is not the same, if you are sure that there is no problem with the sound setting, then it may be that the speaker of the mobile phone is broken or the contact is poor, so that only the earphones can make sound, you need to go to the mobile phone store to check it.

It may be that you set it on it or accidentally turned on the "turn off sound" button, then, even if the **sound is not sound on the Apple mobile phone. To solve this problem, please follow the steps below to set it up: 1. Check whether the [Mute] button is turned on on on the side of the Apple phone, and select [Off] to mute to restore the sound.

2. Some friends may turn on mute on the shortcut keys of the Apple mobile phone's system.

It may be that the socket of your Apple phone earphone is not in good contact, or it may be that the speaker in the machine is damaged. In either case, it should be sent for repair.

Hello, glad to answer for you.

No sound when iPhone plugs in headphones may be caused by damage to the headphone plug or headphones.

According to the description, first of all, the iPhone has sound in the process of using the speaker, which means that there is no problem with the digital audio processor of the mobile phone, and the motherboard and its accessories cause the headphones to be silent.

The remaining areas where problems can occur are the headphone jack and the headphones themselves, damage to the contacts of the headphone jack may cause the headphones to have no electrical signal, but it is unlikely that the reason is that the phone can recognize the headphones plugged in.

The most likely cause is a disconnection of the headphone cable near the headphone plug, which can cause both headphones to be silent at the same time.

It is recommended to change a pair of headphones to listen to it, if there is sound, it can be determined that it is a headphone problem, if it is still silent, it is recommended to go to the after-sales service for maintenance and change the audio plug base.

Hope it helps.

In this case, the phone has entered headphone mode.

It should be: This micro switch is caused by the failure of the earphone, that is, the earphone has been unplugged, but the switch has not been disconnected in time.

You can try quickly plugging in the headphones several times to see if you can make the logo disappear.

If not, it's time to change the headphone jack.

The headphone modes are all switched automatically. When the earphones are plugged in, they will be marked with this earphone.

This is due to the fact that there is a small micro switch in the headphone jack, when the headphones are plugged in, the switch is clicked, and it switches to the headphone mode.

If you unplug the headphones and the switch is disconnected, the flag is removed.

Apple's iOS operating system is very user-friendly, when you plug in the headphones, then no matter how you control the volume, this volume setting will only be there when you plug in the headphones, and when you unplug it, it will automatically return to the volume setting before you didn't plug in the headphones! I don't know if you can understand! In short, you have to turn the volume control back on after unplugging the headphones to adjust the volume!

When you plug in your headphones, you control the volume of your headphones! When you don't use headphones, you control the volume of the iPad itself!

Hello, I have seen your question, and I am sorting out the answer, please wait a while Hello, I am glad to answer for you, I can set it up on it or accidentally turned on the "turn off sound" button. 2. You may turn on mute on the shortcut key of the Apple mobile phone. 3. If the Do Not Disturb mode of the Apple mobile phone is set, then the Apple mobile phone will be adjusted to silent state within the set time period in the settings.

4. The phone enters the headphone mode and recovers. 5. There is an error in the iPhone system.

I hope I can help you, if you are satisfied with my service this time, please give me a thumbs up! Have a great day!

Hello, there is no sound on the phone suddenly, restart the phone to try, it is possible that there is a bug in the general system! There is also a look at the headphone jack, it may be that the headphone jack is dirty and there is lint and the like caused by the headphone jack, this is this problem before me, just clean up the lint.

It may be that the horn is broken or the contact is not good.

There is no sound on the phone, it may be a problem with the phone speaker, you can restart it and try it.

The main thing is that the sound inside the phone is completely gone, so you can only hear the sound inside when you turn on the headphones.

Reboot and see, it's best if it works. It could be a problem with the phone's horn.

Many Apple phones are like this, suddenly there is no sound, but there will be sound inside the earphones, so you can receive it directly by opening the Apple phone.

The iPhone suddenly stopped sounding, but what happened to the headphones having sound? I think this should be the Apple phone's horn is broken.

The Apple phone suddenly has no sound,It's possible that our voice is turned off and muted,Let's take a look at the sound,Is the TV muted?