Lenovo Telecom 4G mobile phone restarts indefinitely after saving bricks

According to the description, the device may not be able to be used normally due to abnormal flashing steps or unofficial custom firmware flashed by mistake, and it is usually necessary to flash the device again to repair and test the hardware. Due to the risk of self-flashing, if the failure causes the equipment to malfunction, it may affect the normal warranty service of the product, it is recommended to contact the repair station to let the engineer assist in the operation. If you are willing to take the possible risks, you can go to Lenovo's official Lewen bar firmware area**Official firmware and detailed tutorials, and try to operate according to the flashing tutorial.

The process of saving bricks from the Android phone line is as follows:

1.Force shutdown, in the shutdown state, in the recovery mode state, and in the fastboot mode, try to connect to the Qitu wire brush master;

1.It may be that there is a problem with the package, try flashing the machine again, 2You can go to the official website of the line brush treasure to see, use the line brush treasure brush tool to solve this problem, the operation is very simple, follow the client operation prompts, connect the mobile phone to achieve flashing!

Problems such as mobile phone system upgrades, downgrades, system failures, mobile phone black screens, and system streamlining can be solved. You can choose different types of flashing packages according to your needs, such as root lite, official, unlock, etc., **Click to achieve flashing, one-click flashing, just enter the flashing mode according to the prompts, no need for complex flashing operations.

If the phone restarts automatically, please recall whether it appears under a specific operation or software and restart, it is recommended to follow the following conditions for simple troubleshooting:

a.Reboot is now present when specific third-party software appears:

1.It is not excluded that it will automatically restart due to compatibility issues, and it is recommended to uninstall and reinstall or replace other software of the same type.

2.The above operations can usually be improved, such as after the attempt, it is still recommended that you back up your personal data and try to restore the factory settings (please be careful to back up important data such as body contacts and SMS, otherwise there is a risk of loss).

b.Occurs without a specific pattern:

1.It is recommended that you remove the SIM card or SD card to turn on and observe, it can be improved after removal, it is recommended to replace the SIM card or SD card, if so, it is not excluded that the card slot is abnormal, it is recommended to send it to the repair site for processing;

2.If you have other batteries, Jianzi will ask you to replace them, and it is not excluded that the battery is abnormal or too short;

3.If there is no significant improvement after the above operations, please back up the fuselage data for factory reset processing (please pay attention to back up important data such as fuselage contacts and SMS messages, otherwise there is a risk of loss).

If the problem still cannot be effectively solved and affects your normal use, it is recommended that you take the time to go to the maintenance station for specific testing and treatment. If the mobile phone is abnormal due to flashing, it is recommended to flash the phone again to solve the problem, because there is a certain risk in flashing the phone by yourself, it is recommended to go to the mobile phone after-sales maintenance site to assist in the completion.

If your phone is automatically restarting, it is recommended that you:

1.Some machine batteries are removable, it is recommended to remove the battery, use a cotton swab to clean the battery contacts and the contact points where the phone connects to the battery. Then plug the battery back into your phone.

2.Uninstall and delete recently installed software to rule out whether it is caused by software incompatibility.

3.Try replacing it with another original battery.

4.If there is an external SD card in the mobile phone, it is recommended to temporarily remove the SD card to see if the same situation occurs.

5.Back up your data (contacts, text messages, **, etc.) and try after a factory reset.

6.Check your phone for firmware prompts. If so, please upgrade your phone to the latest version.

If the problem persists, it is recommended that you bring the purchase invoice, repair card and mobile phone to the local Samsung service center for professional engineers to help you test.

Brother, change your phone, remember not to buy Samsung in the future, Samsung is a scumbag in our China, it is better to buy our domestic machine, don't buy any Samsung, I am now this Samsung mobile phone upgrade system unlimited restart can not enter the coal digging mode, a perfect brick waiting to be surpassed.

Try to enter recovery mode.

The phone is completely turned off, the battery is installed, and in the shutdown state, press and hold the power button for 2 seconds, and then press and hold the volume plus and minus two keys at the same time (at this time, the three keys are together), until it enters the recovery mode, and it can be easily done.

You are welcome to contact us at any time or visit Lenovo Lewen (for consultation.

It's not much of a problem to brush into bricks, you can also brush the machine again, you may not be able to brick it if you don't operate it well, it is recommended that you repair the mobile phone, there is a special flash.