Is it a LAN to connect ADSL with a route? 20

From the telecommunications bureau: count. Why is it disconnected?,The reason is that you have too many connections.,And you're all playing online games.,An online game also needs to have 150kb s of traffic support.,You play with multiple people and it will definitely cause network congestion.。

And the telecom upload for you is 600 640 downpass is not enough.

Solution 1: Apply for a new one.

2. Through the ** server.

I see that you use a computer to test the speed of ADSL, ADSL modem does not connect to the router, but connect your computer to create ADSL dialing software stand-alone test if the problem is still there, then it is not your problem, but the problem of telecommunications.

For your machine, it is in the form of a local area network to access the Internet.

Because you connect 9 computers, you should buy a relatively good router when buying a router, and it is best to tell the seller about your network environment, because routers of different grades are limited by the number of threads, and some low-end routers cannot afford it.

9 people use one interface, and it is normal to cut off the current.

Yes. Because that's how we pulled a network cable.

But our routing is normal.

Yes, because I'm just like yours, but it's a matter of circumstances!

People are becoming more and more enthusiastic about the current white-hot APP applications, and you will see handheld devices everywhere in Weibo, chatting WeChat, and playing applications, which shows that wireless routers are playing an increasingly important role in modern people's lives. Here's how I have compiled for you to connect ADSL and wireless routers, let's take a look!

1.Schematic diagram of the connection: **The cable --- cat --- your computer network port.

Here you need to create a new broadband connection in your win7 computer.

<> choose this broadband PPPOE. Click on it and the following image appears:

Once <> clicks on close, you'll be able to surf the internet.

The next time you're online, just tap the network connection icon in the bottom right corner of the taskbar

<> where this broadband connection is the new one you just created, you select the broadband connection, click the connection and the following screen will appear:

Enter your password and click Connect to access the Internet.

End 2: Connect with a router:

1.Connection diagram: ** cable --- cat --- network cable--- router--- network cable --- your computer network port.

2.Settings: After the connection is completed, first set the IP address of your computer, that is, open the local connection of your computer, open the network and sharing center--- local connection --- attribute ---ipv4--- double-click to enter the ipv4 attribute setting related parameters, see the following figure for details:

For example, behind your router, if the IP address of your router is, (or then you set your IP address to DNS to your local DNS address, or set to, my side is Lianyungang, Jiangsu, I set it to, (if so, then the corresponding parameters also need to be changed) as shown in the figure:

Click OK after the settings are complete, and then exit the IP settings.

Once you're sure, go to the router:

Click Setup Wizard, click Next, and select PPPoE

<> enter the Internet access and password, which is the broadband and password that you just entered with the cat alone.

After the setting is completed, the computer will prompt you to complete the setting, and you need to restart the router after completion, and you can go online after restarting the router. At this point, the setup of Internet access through the wireless router is all completed, and then you can directly turn on the computer to access the Internet, and there is no need to click on the broadband connection to access the Internet.

China Unicom provides a network access port, which is divided into ADSL and LAN, ADSL uses ** line to the user's home, and LAN mode is generally the network cable to the user's home.

ADSL+ router mode refers to the way that after connecting the port of ADSL (through the ** line), there must be a cat (modem), ** wire is connected to the cat, and then the network cable that comes out of the cat is connected to the router for multiple computers to access the Internet. If you only have one computer, connect the network cable from the cat directly to the computer network card without the need for a router.

LAN mode is the network cable to the home, can be directly connected to the router for multiple computers to access the Internet, if there is only one computer, can be directly connected to the computer network card.

This thing is just a name, to be exact, just a way to connect to the Internet, not a way to go online.

If you only have one computer to access the Internet, there is no need to install a router, the router is to divide multiple lines or wired and wireless at the same time, and the connection is ordinary ADSL

It is to use ** online network, adsl is commonly known as cat.

ADSL+ Router refers to dial-up Internet access through ADSL modem, and then share it with several machines through the router.

Does your home have fiber optic access, do you need to dial up?

Let's keep it simple.

ADSL is what gets you online.

A router (divided into wireless and wired) is something that allows you to use several more computers to surf the Internet together (provided you have ADSL).

China Unicom, China Telecom, and China Mobile are all divided into ADSL (virtual dial-up mode) and optical fiber Internet access.

There are ordinary and wireless routers on the router, wireless routing is to add a receiver on the basis of ordinary routing, suitable for notebook wireless Internet access, desktops are generally not needed, routers have 8 holes or 4 holes, brands D-Link and TP-Link are better, the former is more expensive than the latter, the wireless router D-Link 4 holes are about 200 yuan, due to the reason, the router's ** has risen. Now let me talk about how to use it, first of all, I want to know what kind of way you use to surf the Internet? Telecommunications?

Netcom? Tietong? Wired pass?

I take a four-port router as an example, the so-called 4 ports actually have a total of 5 ports, one is different from the other is the broadband interface, you connect the broadband network cable to it, and then connect two network cables from any two of the other four ports respectively to connect them to your own computer, here the hardware connection is completed, don't forget to plug in the external power supply of the router. Generally, the default default is not to set to be able to surf the Internet, and the default address of the router is.

The username and password are admin, you can enter the login in the address bar and set it, and the computer IP or DNS will automatically obtain it, or you can set it. If two computers want to share a local area network,Then add me qq:93341901.

Guess the IP of the computer in your router starts with it. It should be considered a local area network.

Broadly speaking, the LAN is connected to the Internet with the router routing function.

Let's start by understanding the general purpose of routers:

The router is connected to two local area networks, generally speaking, it is equivalent to a door or a bridge, connecting two separate network areas together, and it mainly plays the role of traffic guidance of the three-layer network. That is, three-layer switching.

If your router is a network cable that plays the role of a gateway and connects to the Internet, then your LAN port is connected to the LAN and is also a part of the LAN.

No matter how many computers you have connected, even if one does not have your LAN port, it still represents the LAN.

PS: Wide Area Network.

To put it simply, it is composed of two or more LANs and the routers that connect them, which can be regarded as ===

WAN = LAN + Router + LAN +

3 All general wireless router configurations are as follows (if it is a wired router, please ignore the steps of wireless settings):

0) If it is ADSL access, prepare two network cables, one network cable to connect the computer network port to the LAN port of the router, and the other to connect the LAN port of the cat to the WAN port of the router (the computer network cable is connected to the router in order to configure the router, if you use wireless, after configuration, you can unplug it).

1) The router is powered on, and the cat is powered on.

2) Find the router's manual.

3) Find the management IP of the router (generally, the login account password (such as the admin password is empty), and log in**Example->

4) Statically set the IP address of the computer host and the management IP in the same network segment (if the router is enabled by DHCP function by default, then set the computer network card to automatically obtain the IP).

5) Log in to the wireless router management interface.

6) Turn on the DCHP service of the wireless router.

7) The wireless router is set up with PPPoe auto-dialing function to connect permanently.

8) Turn on the wireless function of the wireless router and set the wireless Internet password (if it is a wireless router, the password is set to a complex point to prevent it from being cracked).

This should be able to automatically dial up the Internet, wired and wireless at the same time.

PS: If the router is enabled DHCP by default, then the IP and DNS of the computer should be set to automatically obtain, so that if multiple computers form a LAN, there is no need to set the IP.

Simple 1: Connect the router to the LAN port with a network cable, connect the computer network card, set the ADSL account and password, turn on DHCP, save and remove the network cable.

2. The computer sets the IP address to be obtained automatically.

3. ** The cable is connected to the ADSL dialer Link DSL port, the network cable is connected to the LAN port, and then the network cable on the dialer is connected to the router WAN port, and the computer network cable is connected to the router LAN port.

4. Restart your router and start surfing the Internet.

How routers work.

1. The router receives data from a certain ** it is connected to.

2. The router passes the data upwards and (if necessary) reassembles the IP datagram.

3. The router checks the destination address in the IP header, and if the destination address is located on the network that sent the data, then the router will drop the data that is considered to have reached the destination, because the data is transmitted on the network where the destination computer is located.

4. If the data is to be sent to another network, then the router will query the routing table to determine the destination of the data to be reached.

5. After the router determines which adapter is responsible for receiving the data, it transmits the data through the corresponding software in order to transmit the data through the network.

In addition to the broadband access of virtual dial-up such as ADSL, there are still a large number of families using community LAN type broadband Internet access, how to combine wireless networks to make Internet access more free? In fact, it is still possible to use a wireless router. It is very convenient and practical, in addition to your own computer, when a friend comes to play, his laptop can be connected to the Internet without setting.

With community broadband access, the setting of the wireless broadband router is as follows: no matter what kind of community broadband, there is a network cable to the door or even the house, connect the network cable to the WAN port of the wireless broadband router, connect the computer at home to the LAN port of the wireless broadband router with a network cable, and the computer equipped with a wireless network card can directly search for the wireless network established by the wireless broadband router, and then we can start to share work.

On a computer connected to a wireless broadband router, open Internet Explorer, enter (different wireless routers, the default address is different, you can refer to the manual), enter the web management interface of the wireless broadband router, in the WAN port setting of network parameters, all kinds of cell broadband bound to IP, if the ISP has been assigned a fixed IP address, you can set the WAN port connection type to "static IP", and then enter the corresponding IP address, subnet mask, Parameters such as gateways, DNS servers, etc.

For example, e-home broadband, China Unicom broadband, Netcom broadband, Great Wall broadband, etc., are dynamically assigned IP addresses by ISPs, and the WAN port connection type can be set to "dynamic IP", and parameters such as IP address, subnet mask, and gateway can be automatically obtained after saving the settings.

Since the wireless broadband router has the routing function enabled by default, as long as you set the IP of the computer you want to access the Internet to 2 255), the default gateway address is, and enter the correct DNS server IP address, for example, Guangzhou Telecom's DNS server is; There is even more convenient, as long as you use DHCP on the computer to automatically get the IP address, you can get the parameters required for Internet access from the wireless broadband router, and the computer can access the Internet, which is very convenient, and interested friends may wish to give it a try.

Look at the network cable of the ADSL cat should be connected to the WAN of the router, is that so?

If so, try changing the host IP to try.

There is no setup wizard, and you can set the network parameters in the WAN port.

Network Cable-Mimeter-Router-Host.

Landlord, did you pick up the wrong one, or did you make a typo?