I used the router to access the Internet on the LAN. Sometimes it s slow, what s going on?

1.If the router or modem is not turned off for a long time, it will overheat or be overloaded, and the data processing speed will not keep up.

3.IPS issues, i.e. telecommunications or networking, etc.

Otherwise, with a single 1m network cable, it is impossible to even open the web page. Nowadays, the bottleneck of slow web browsing is often not the speed of the Internet, but the speed of the processor and hard disk, as well as the selection and configuration of the browser. In this case, there are two types of frequency bands, which are used by too many people, and the interference is particularly large, which affects the Wi-Fi connection.

There are also too many connected devices on the wireless router, which is overloaded. 1. First of all, see if our router supports wireless signal increase. For example, TP-Link's TL-WR2041N's unique "Turbo" button can make the wireless signal increase coverage with one click, and we can directly press this button once.

When this light is on, it means that the "turbo" function has been turned on

2. Of course, if you are too far away from the wireless router, the signal will definitely be weakened, so you should try not to be too far away from the wireless router:

3. At the same time, ensure that there are not too many obstructions, and too many obstructions or through the wall will greatly affect the wireless signal

4. The interference generated by some home appliances during operation will seriously affect the wireless signal, so do not place the wireless router near the home appliances:

5. You can restart these wireless terminals, or turn on and off the "airplane mode" of the mobile phone

6. It is also possible that the channel of the wireless router is a problem, you can try to change the channel of the wireless router to a common channel such as 6 or 9

Make sure that the wireless router is not being rubbed.

Check for wireless interference that is slowing down your wireless network.

Press the small REST button on the top of the router with the tip of the pen for more than 3 seconds to restore the factory settings, and then reset the router again. If it still doesn't work, you can connect the network cable directly to the computer, if the computer can directly dial up the Internet, and the router's various indicators are normal and can not access the Internet, it means that the router is broken, but it is best to check whether there is a problem with your line. Use the tip of the pen to press the small REST button on the top of the router to do a factory reset, and then reset the router again.

If it still doesn't work, you can connect the network cable directly to the computer, if the computer can dial up the Internet, and the router indicators are normal, it really can't go online, it means that the router is broken, but it's best to check whether there is a problem with your line.

Home wireless router is not an industrial device, can not be turned on for a long time, after two or three days it is best to stop and rest.