Can Nokia phone earbuds be connected to a computer for recording?

Yes, it's quite a microphone.

There are two ways to record it:

1. Use a voice recorder. As long as you turn on the [Audio Recorder] function, you can start recording;

2. Recording during a call, as long as you click the [Record] button on the call page, the recording will automatically start. After hanging up**, the recording is automatically saved.

Call recording: Call recording is the recording of the conversation between the two parties during the call. When using this feature, pay attention to the maximum time and number of recordings allowed.

Nokia Bluetooth headset and mobile phone connection steps

How to connect Nokia Bluetooth headset with mobile phone: First, turn on the Bluetooth headset, press and hold the Bluetooth headset on/off key (answer button) for about 5 seconds, and the indicator light will be on and flash rapidly; Put the earphones on your ears, take out your phone, and select "Bluetooth" in the "Settings" interface; Turn on the Bluetooth switch; After searching for a while, we should find the Bluetooth headset device we just turned on; Tap touch to pair, and the Bluetooth headset will hear a prompt tone; Pairing is displayed; The pairing is successful and can be used normally.

1. First turn on the Bluetooth headset, press and hold the Bluetooth headset on/off key (answer button) for about 5 seconds, the indicator light is on and flashes quickly, when pairing, please control the distance between the Bluetooth headset and the mobile phone within 1 meter, the closer the better;

2. Put the earphones on your ears, take out your mobile phone, and select "Bluetooth" in the "Settings" interface;

3. Turn on the Bluetooth switch;

5. Touch to pair, and the Bluetooth headset will hear a prompt tone;

6. Showing that pairing is being made;

7. The pairing is successful, and it can be used normally!

Press the switch of the Bluetooth headset for a few seconds, and wait for the light to turn on the Bluetooth to search for audio devices. The pairing password is usually 0000 or 1234 or you set it yourself.

Put the phone bluetooth.

The program opens, select --Pair Device--Option---New Paired Device--OK, and press and hold the on/off button of the earphone for 5 seconds (in the case of turning off the power of the earphone), the earphone will enter the pairing state, if the phone finds the earphone (if the same code: 0000) connect the earphone and set it as an authorized device.

For the first pairing, press and hold the Bluetooth switch until the phone responds.

The phone's audio interface is one that listens and speaks together.

The interfaces on your computer are separated, one is to speak, the other is to listen, no matter how you plug it in, you can't use it at the same time.

There is a two-in-one converter on the Internet.

If you're on a laptop, some of them have the same interface as a mobile phone. But I think you still fall into the above situation.

The default settings are different.

, Bluetooth headset long press to keep on, not flashing, connect with a mobile phone, the password is generally 0000

When the phone is set up to connect, you can press and hold the button on the top of the earphone.

Need to turn on the mobile phone Bluetooth below is the use of the basic universal code on the mobile phone: "open" Bluetooth function, "search" Bluetooth device, at the same time, press and hold the Bluetooth headset on and off key (next to the earpiece), until the indicator light of the headset flashes from red light to red light, green light flashes alternately and then let go, wait for pairing, the mobile phone appears "bluetooth" indicates that the Bluetooth headset is searched, "add" the Bluetooth device on the mobile phone, enter the identification code "1234", add completed, The headset indicator turns green and flashes once for a longer period of time. Indicates that the code matching is successful.

After dialing **, after the mobile phone is connected, the headset will be automatically connected and the call will be heard.

After hearing the prompt tone in the earphones, press the on/off button of the earphones to answer**.

Hang**Press the button to hang up. It should be noted that if the other party hangs up first, press the power button to make the earbuds in a standby power-saving state.

Turn off the earbuds and press and hold the power off button on the microphone side for 5 seconds to power off. This key is also the volume change key, press it once in the boot state, and the volume will be changed alternately, and there are three gears.

After pairing, turn on the earbuds and press and hold the on/off key on the earphones, the red light will be on, let go, and the mobile phone that has been turned on will automatically match the code. Press the Power On button. The paired earbuds do not need to be matched again when they are re-energized.

Wear the earphone hook from the base of the ear behind the ear as if you were wearing glasses, so that the microphone is pressed against the pinna.

ChargingOpen the plastic sheet on the side of the earbuds, and you will see that the charging is empty.

If not, look at the address below, choose your own Bluetooth model, and read the instructions.

Look at what model it is, mainly turn on Bluetooth in your mobile phone, find your headphones, verify the password, and set it all Confirm OK.

Start pressing for 5 seconds, flashing, then take the phone to search for the hands-free device, after the search is successful, connect, enter the password ......Ok, the next time you use it, you can turn on the Bluetooth headset directly, and you don't need to connect it again....

Turn on the Bluetooth of the mobile phone first, turn on the Bluetooth headset, press and hold the power button, you will see the traffic light flashing, search with the mobile phone and wait for a while, you will see the words on the mobile phone requesting connection, the point is to enter the password 0000 to pair, next time you don't need to pair, the mobile phone will be searched.