Why is the sound so bad when the headphones are burning?

PCHOME Overview] What is a burn-in? This may be a relatively unfamiliar term to many people. The so-called burn-in is a measure to quickly stabilize the aging of equipment, and for headphones, it is a method to achieve the best effect after a period of time.

Because the accessories of the new headphones are also new, the function is unstable, which will cause the effect to be distorted, so it is needed"Burn the machine"Put the headphones into use.

What is burning? This may be a relatively unfamiliar term to many people. The so-called burn-in is a measure to quickly stabilize the aging of equipment, and for headphones, it is a method to achieve the best effect after a period of time.

Because the accessories of the new headphones are also new, the function is unstable, which will cause the effect to be distorted, so it is needed"Burn the machine"Put the headphones into use.

The choice of burn-in is very particular, and for those who are just getting started, how to choose a burn-in plan may be a little difficult. Kuwo**'s new feature "Smart Cooker" allows you to make your headphones or audio equipment in the best condition in just a few steps, so as to enjoy a higher quality listening experience.

2.Find "Smart Cooker".

3.Once turned on, connect the headphones or speakers.

4.Select the brand and model of the headphones.

5.Choose your preferred type of burner**.

6.Choose the burn-in plan and choose the appropriate duration according to your personal situation.

7.Just wait and in two or three days, you'll have your headphones in the best condition.

Generally, when new earphones are first used, that is, at the burn-in stage, the sound quality will not be so pleasant, the sound will be hard and dry, and it will not be so soft, especially dynamic headphones, which are the most obvious, you can try.

Did you come across a kana brand? Good headphones are more pleasing to the ear when you try them at first. In the future, the sound quality will be better.

The sound quality will be a little better.

The vibration system of the headphones that have not been boiled will be tighter and harder, but by burning the headphones, the vibration system can be relaxed, and the parameters will tend to be stable, so the sound quality will be a little better. After boiling for a period of time, the effect will not be too obvious. To have a good sound, the main thing is to look at the sound source and other equipment.

Not all headphones will sound better after cooking, and the quality of the earphones themselves is determined, some headphones after the effect is not very obvious, the purpose of the burn-in is to help the earphones quickly pass the aging adjustment period, so that the physical characteristics of each component of the headphones to achieve stability.

There is a big difference between the front and back of the moving coil headphone cooker, and there is basically no difference between the front and back of the moving iron headphone burner.

1. The diaphragm movement should be a piston (vertical) movement, which requires the edge of the diaphragm to have a larger compliance, the pot is the pot here, the diaphragm edge of the new earphone is relatively tight, the elasticity is large and the compliance is small, the earphone is to let its edge move, and the sound is not so tight.

2. The burn-in is "gradual", that is, the songs you listen to should not be songs with strong bass such as rock DJs, and the volume should not be too loud, and it is good to keep it at 30%. The headphones are not boiled at first, and the sound is easy to be distorted and unpleasant.

1. There is a big gap between the headphones before and after the burn-in, which generally reflects the gap of 10 hours, 50 hours, 100 hours, and more than 300 hours. Some headphones heat up slowly, while others quickly get into the groove. Also, many particularly good headphones do not burn in and the sound quality is very poor, such as IE80 and so on, which are very "undercooked", but some new headphones are good at the first ear.

2. There is not much difference between the moving iron headset burner.

3. Some headphones are very high-imitation, such as Sennheiser, Magic Sound, and high-imitation headphones are cooked, and many burners can't hear that they are fake. Therefore, these brands often judge the authenticity not by sound, but by the purchase channel and the place or store where the purchase is made.

1.The main purpose of cooking headphones is to make the mechanical system of the headphones a rapid aging process, the sound system of the dynamic headphones is driven by the voice coil, and the diaphragm is fixed to the frame of the headphones.

2.Theoretically, the diaphragm movement should be a piston (vertical) movement, which requires the edge of the diaphragm to have a large degree of compliance, the pot is a pot here, the edge of the diaphragm of the new earphone is relatively tight, with large elasticity and small compliance.

3.Cooking the headphones is to let the edges move, and the sound is not so tight.

The sound will become softer and more natural, and the more advanced the headphones, the more noticeable the improvement.

The sound of the headphones will not only change after cooking, but it is basically a world of difference.

In principle, it is the process of running in the diaphragm, and some headphones have to be boiled for hundreds of hours to enter the best working condition.

Typical changes are that the soundstage is wider, the details are better, and there are some changes in the timbre.

LS said very reasonably, in addition, this headphone** costs about 2000, I hope you are not buying a fake.

Isn't it boring to listen to, this is a feature of closed-back headphones, in addition, the headphones are not so magical, see the white version of the post, as follows.

The second rule is clear: don't expect a pair of headphones to completely change shape and become another pair of headphones after burning. The style and basic contours of the sound are already determined after the vast majority of headphones are turned on and initially stabilized, and do not become a different style of headphones after a few months of use.

If the basic style of a new pair of headphones is not what you like, don't believe that you will like it once you turn it on.

Transform slowly. There is only one case for a sudden change: the headphones are broken.

And that's because the low frequencies are boiled on, and the so-called shock that you hear is just the roar of the low frequencies when they are not boiled, and it's not the shock, it's the muddy and the bang.

Now that the low frequency has retracted, after the analysis becomes clearer, it will naturally feel that it is not as explosive as the original.

Let's get used to it slowly After the headphones are burned, the sound will change Some are getting heavier and heavier at low frequencies Some are the opposite This is the reason for the quality and tuning of the headphones themselves It has little to do with you burning the machine I don't think your burn-in is too heavy So it's not a big problem Don't worry too much about it.

There are many ways to burn the machine, and I have 11 pairs of headphones and plugs so far, and the length of time to burn the machine varies, because the quality of the headphones is different, and the short 50 hours is enough, and the long one is half a year.

I prefer a natural pot and feel the changes slowly rather than the sudden leap.

Start with the sound of snowflakes (the rustle of the radio without channels) at normal volume for 20 hours.

Then listen to it.

And slowly, after 100 hours, when you look back at it, you'll see that it's become very different from when you first met.

In fact, doing this is to cook the earphones at the same time, and let your own body adapt to the sound of the headphones, which may be more mysterious, but it is not unreasonable, according to the irony of the fever world, it is the brain amplifier, so I am standing in the school of natural cooking, so let your ears and the headphones slowly run in.

There's one more question that I just found out.

You say you're up to 70 percent, 70 percent volume, that's too high, and I'm going to use the front end to listen to it, and it's up to 50 percent.

Obviously, you have a problem with the front-end thrust, the thrust is not enough, and you can't give full play to the strength of the headphones, which is also one of the reasons why you feel that the sound is wrong, and it is one of the most important reasons, even if your headphones have been boiled on, there is no suitable front-end, and the headphones can't give you a good sound. It's necessary really)

Hand type so many words, add points!

It is normal for the bass effect to be reduced after the headphones are turned on.

After the headphones are turned on, the diaphragm of the speaker is constantly changing, and it will change with the different levels and volumes.

"Burn-in" means that the stability of the sound quality of the new earphones needs to go through a trial period, and a proper burn-in trial will not damage the headphones, but will only accelerate the stability of the sound quality, which is the sound quality of the headphones better, more stable, and better life.

It's normal, my Tianlong D1100 listens to the bass for a while, and the bass is not so loud.

First of all, no matter who you are, you have to admit that the first 50 100 hours can really improve the quality of the headphones themselves (there is a scientific basis), but then I personally think it's a bit mysterious, to be honest, the time behind me feels like the ears are adapting to the headphones, there may be slight changes, but to be honest, very few people can really hear it.

In fact, in my opinion, part of the burn-in of the earphones is actually to enhance the mystery of the ** earphones, and secondly, it may be that the second-hand earphones are easy to get rid of.

Summary: The front 50 100 hours is still a serious fort, the main front 50 hours do need to put the unit Shu, the back 50 hours is just in case, anyway, I will be serious in addition to the time when I just burned, the back is only 1 week 8 hours a day with an interval of 2 hours, and then it is casual not to deliberately fort, normal use on it.

In fact, the boiling machine is the same as the opening of the purple clay pot, which does have a certain truth in itself, but the artificial mystification has caused the things that have a scientific basis to become metaphysics.

This is because the low frequencies are boiled on.

The so-called shock you hear.

It's just that the low frequency doesn't have the roar when it's boiled.

Actually, it's not a shock.

It's cloudiness and headbanging.

Now the low frequencies are retracted.

After the analysis becomes clearer.

Naturally, it will not feel as explosive as the original.

Take your time to get used to it.

The earbuds will change sound when they are turned on.

Some are getting heavier and heavier at low frequencies.

Some do the opposite.

This is the reason for the quality and tuning of the headphones themselves.

It has nothing to do with your burning.

I don't think you're too heavy.

So it's not a big problem.

Don't worry too much about it.

The cooker is also the ear.

I've owned 11 pairs of headphones and plugs so far.

The burn-in time varies.

Because the quality of the headphones is different.

Just 50 hours.

It looks like it took half a year.

I prefer natural pots.

Feel the change slowly.

And not a sudden sense of leap.

Start with the sound of snowflakes (the rustle of the radio without a channel).

Normal volume 20 hours.

Then listen to it.

Slowly 100 hours passed.

You look back and experience it.

You will find that it has become very different from when you first met.

Actually, do it.

While cooking headphones, it is also cooking ears.

Let your own body adjust to the sound of the headphones.

This thing may be more mysterious.

But not without reason.

According to the sarcasm of the fever world.

It's brain release. So I'm on the side of the natural pot.

Let your ears and headphones slowly run in.

There is one more problem.

I just found out when I added it.

You said your voice was up to 70 percent

70% volume.

It's too high, and I use the front end to listen to it.

At most, it's hard to drive to 50%.

Obviously you have a problem with the front-end thrust.

Not enough thrust. You can't give full play to the strength of your headphones.

It's also one of the reasons why you feel that the sound is wrong.

And it's one of the reasons for that.

Even if your headphones are already boiling.

There is no suitable front-end.

Headphones don't give you a good sound.

If personal finances allow.

Go add a headphone amp! It's necessary.

Really) hand typed so many words.

Let's add a point!

Do headphone burners work? It's not what you think!

In fact, the reason for burning the machine is very simple, just like a newly bought car needs to be run-in, audio products also need to go through the same stage before normal use, so that it can enter the best condition. According to experts, the burn-in is actually a measure to quickly stabilize the equipment. Some components such as transistors, integrated circuits, and capacitors are unstable when they are brand new, and they can gradually stabilize after a period of use.

For earbuds, the burn-in is actually in the diaphragm folding ring, the new earbud diaphragm folding ring mechanical compliance is poor, resulting in a relatively large distortion, after a period of use, the compliance gradually improves, and the distortion will gradually drop to a normal level.

Experts revealed: natural earbuds are the best, so consumers may wish to put more different styles of **, the specific burn-in method and time are as follows.

1.Shu Jing used a volume of one-third of the normal listening intensity to drive the headphones for 12 hours;

2.Tongluo uses two-thirds of the normal listening intensity to drive the headphones for 12 hours;

3.Xiwu uses normal listening intensity to drive headphones for 72 hours;

4.Beat the headphones at four-thirds of the normal listening intensity for 24 hours;

5.The debut entered the stage of normal use. There are at least two major benefits to this burn-in method.

First, you can understand the law of sound quality changes at each stage of the burn-in, understand the role of the burn-in, and accumulate experience;

Second, it can improve the performance of the equipment, leave no hidden dangers and prolong the life of the equipment.

Cooker headphones** recommended.

Female voice Cai Qin "Ferry", "Your Eyes", "Opportunity".

Salad Brightman "Moon Goddess"**.

Male Tengger "Paradise", Flying Eagle "Hotel California", the world's three major tenor works.

Chen Yongtao, "The Song of Atao".

High frequency Lu Siqing "Four Seasons", Accardo "Diabolus in Musica".

Low frequency overall "Drum Poems", Yan Xuemin "Yanhuang First Drum".

There are also four ways to use headphones correctly.

First of all. Before use, you should pay attention to the standard power parameters of the earphone, the earphone and the bulb are the same, there is also a difference in the amount of power to bear, the volume is too large to deform the earphone coil and diaphragm, resulting in rubbing or burning; Secondly. Do not wrap the earphones directly around the digital device, which is very easy to hurt the wire, if there is a coil box, you can circle it and put it in the box, and if you don't have it, you should put it away separately; Again.

Do not use the earphones in high temperature and humidity places for a long time, which can easily cause damage to the earphones or reduce the service life.

I hope that it will be helpful to friends who know headphones for the first time, and slowly join the stage of audiophile headphones, and experience our happy sound quality together...