How to choose a toilet and how to choose a toilet?

Now there are many brands of toilets on the market, it is recommended that you choose Faenza, which is a big brand, and the quality and after-sales service are very good.

1. Distinguish between a conjoined and a split toilet.

Siamese toilet: Simply put, the toilet tank and toilet are connected together, this kind of conjoined toilet is relatively simple to install, and there will be no seams, easy to clean.

Split toilet: The water tank and the base are separated, and the toilet needs to be connected with the water tank with bolts when installing.

Although some toilets are also said to be conjoined, but in fact, they are fired separately, and the last process is spliced together and then glazed, this can be touched by hand, if the side is smooth and non-concave, it is one-piece firing, and if there is a concave and convex joint, it is separated.

2. Distinguish between a clear row or a wall toilet.

When buying a toilet, it is necessary to distinguish whether it is a floor toilet or a wall toilet, this is very critical, the meaning of the wall row, the water is to the wall pipe, the ground is to the ground pipe, if the toilet drainage method is different, it may lead to your home can not be installed, then it will be very troublesome to return.

3. Distinguish the quality of water parts.

The core part of the toilet is the water piece, so when buying a toilet, it is also recommended to open the toilet lid to see what brand of water is inside, preferably the water part produced by a well-known brand, and you can also press it with your hand to see if it is smooth.

Look at the pros and cons of the toilet

1. Water consumption. Old-fashioned siphon toilets require a lot of water to ensure that they flush cleanly, which is more water-intensive than flush toilets. However, after the improvement of the curve, the current siphon toilet and the flush toilet use about the same amount of water, but slightly more than the latter.

Second, the intensity of washing. Due to the use of the gravitational potential energy of water and its special steep structure, under the same water consumption, the flushing power of the in-line toilet is greater, while the performance of the siphon toilet will be a little inferior. At the same time, the amount of scouring force will also affect the cleanliness of the scouring surface.

The inner wall of the toilet bowl will be contaminated with some filth, and the cleaning effect of the in-line toilet will be better.

3. Flushing noise. No toilet flushes silently. However, in contrast, the flushing process of a direct-flush toilet is simple and rough, and the sound will be louder, while the siphon toilet will make less noise by using the difference between pressure and liquid level.

Floor-standing toilets:

1. The floor toilet is generally quite simple to install, and the cost is low, even if there is a problem with the drainage pipe and other parts in the later stage, it is relatively simple and convenient to maintain. However, during the installation process, it is necessary to ensure that the flange and the sewage outlet are well sealed, and at the same time, the ground interface must be glued.

2. The floor toilet occupies a large area when it is installed, and it needs to be reasonably planned and marked according to the available space of the bathroom before installation, so as to prevent the toilet from being unable to get down or open the door to touch the toilet after installation.

3. The floor-standing toilet is in contact with the ground, and it is very inconvenient to clean, even if it will be sealed with glass glue during installation, but during long-term use, the glass glue is easy to age and fall off, moldy and black, and there will often be peculiar smells emitted from the bottom of the toilet. So if you plan to install a floor-standing toilet at home, be sure to clean the edge of the toilet regularly and change the glue, especially in the summer.

4. Floor-mounted toilets generally include: back, side and lower rows, so when choosing a floor-standing toilet, it is necessary to determine the layout of the drainage pipes in the bathroom, and try to make the water pipe docking and installation convenient.

1. Observe the gloss of the toilet.

The higher the gloss of the product, the higher the density, the easier it is to clean and hygienic. This is because the quality of porcelain is directly related to the life of the toilet, the higher the firing temperature and the more uniform, the better the porcelain.

2. See if the glaze is uniform.

Consumers can ask the store whether the sewage outlet is glazed, and even put their hand into the sewage outlet to feel whether there is glaze in the return inlet. The main culprit of hanging stains is the poor glaze, customers can touch it with their hands, and the qualified glaze must be delicate to the touch. Consumers can be picky and touch the corners of the glaze (yin and yang), if the glaze is very thin, it will be uneven in the corners, the bottom will be exposed, and it will be very rough to the touch.

3. The flushing method of the toilet.

The cleanliness of a toilet is directly related to the way it is flushed. At present, there are two main flushing methods of domestic toilets, direct flush type and siphon type. The flush toilet uses its own gravity to flush the water during flushing to press out the dirt from the toilet trap to achieve sewage discharge, which has the advantage of strong sewage discharge capacity; The siphon toilet uses the siphon force generated in the toilet sewage pipe when flushing to suck the dirt out of the toilet trap to achieve the purpose of sewage discharge, the advantage is to avoid splashing water when flushing, and the cylinder flushing effect is cleaner.

4. The water consumption of the toilet.

There are two ways to save water, one is to save water consumption, and the other is to save water through wastewater reuse. Water-saving toilet and ordinary toilet function is the same, must have both water-saving, maintain the function of washing and conveying excrement, the current market with water-saving slogan but product technology and actual effect is not satisfactory products are not a few, purchase need to pay extra attention.

5. Test water-saving performance.

Many products on the market claim to use a 6-liter water-saving design, but in fact, it is difficult for ordinary consumers to discern the actual effect, so it is recommended to buy well-known brand products. The glazed surface of the toilet should be smooth, flat, without ripples, crystal color, and without needle eyes or impurities. Because the flatness of the pool wall directly affects the cleanliness of the toilet, the smoother and more delicate the pool wall, the less likely it is to get dirty; The pipes should be relatively smooth, otherwise it will affect the sewage discharge, which is often not possible with counterfeit products.

Medium size, large flush volume, odor resistant, wear-resistant.

First of all, it is necessary to choose a dense toilet, which is not seepage and smelly.

Optional big white bathroom, AI voice control, simple and atmospheric appearance, super intelligent one, cost-effective.

Toilet brings great convenience to people's lives, at the same time of convenience, the manufacturer has designed a beautiful and practical toilet, if your toilet is not selected well, there will be a phenomenon that cannot be flushed clean, blocked or the bathroom is smearing. Then toHow to choose a toiletHow to buy a Nianfan core toilet?

Shape. Look at the appearance, choose the appearance and functional model that suits your needs, if there is a mother and child cover, which is convenient for children to use, and the child can change the cover when he is older; Some are wall drainage, some are lower drainage; Some are suitable for fat people, and some are suitable for the general public.

Save water. The national standard of water-saving products is 6L, and now there are 3L or 4L on the market, but the technology is not mature, the mainstream is 3L water consumption, taking a family of three as an example, you can save 33 bottles of water per day, and you can save nearly 200 yuan of water a year, and you will always use a house decoration for 8-10 years, so that if you calculate it, you buy this toilet as if you didn't spend money, which is quite cost-effective.

Sewage. According to the sewage discharge method, the toilet can be divided into rear and lower toilets. The rear toilet is also called the wall toilet, and the toilet is mostly installed against the wall. The lower discharge type, also known as the vertical discharge type, means that the sewage outlet is on the ground.

Key points of purchase: The purchase of rear toilets is to consider the height of the center of the sewage outlet from the ground; The lower discharge type should pay attention to the distance between the center point of the sewage outlet and the wall.

Hole spacing. Measure the hole spacing and choose the hole spacing that suits your own use, otherwise, even if you can change it, there are still a lot of troubles about going up and down the stairs to dig and return. There are two kinds of spacing of sewage holes: 300 mm and 400 mm, if it is 350 mm, choose 300 mm.

glazed. An important indicator of ceramic glaze is the water absorption, and the national standard water absorption is. For example, wood is definitely easier to absorb water than glass, and a good glaze is like glass, so it will definitely not be released slowly after absorbing odor, and it will not change color and yellow, and it will not change color and yellow, and it will be used for more than ten years, and it feels the same as a new one, so there is still a big gap between a good glaze and a bad glaze.

It is also very important to look at the after-sales service.

The above is a few toilet purchase points of attention, we must pay attention to the purchase, so as not to bring inconvenience to the sedan car and future life, if you want to know more about the decoration of the selection of materials knowledge, please **** selection manual column!

There are tips for choosing a toilet, remember these 3 points to ensure that your toilet is clean and odorless!

First of all, you have the right understanding of how the toilet is fed.

For the question of how to know which type of toilet you can use in your home, you only need to look at the floor in the bathroom to see if there is a 110mm diameter sewage pipe. If there is such a sewage pipe on the ground, and the distance between it and the wall is 30+cm, or 40+cm, then it is a bottom-drain type. Conversely, if the sewage pipe is installed in front of the wall, then it is a wall type.

However, in many cases, the wall row pipes are installed later and are not pre-buried.

The horizontal row (wall row) type and the bottom row (lower row) do not refer to the water inlet method, but to the drainage method.

If the pipe (about 11 cm in diameter) that is ready to be installed in the toilet position is erected (the nozzle is parallel to the ground, as if the pipe is erected), you can use the bottom row, if it is horizontal (the nozzle is parallel to the wall, as if the pipe is placed on the ground), you should use the horizontal row.

See schematic diagram.