The millet kettle can t boil water, and the millet electric kettle can t be repaired if it doesn t h

In this case, it is very likely that the electric furnace wire is broken, or it may be because the computer board is faulty, and it is possible to catch the cauer.

What is the altitude of your area, do not use the electric kettle in an area above 1000 meters above sea level, the higher the altitude of the area, the lower the air pressure, and the use of the kettle may cause the phenomenon of "not boiling" when boiling water.

The Xiaomi kettle can't boil water, you check whether the power supply has electricity, if there is no electricity, it may be a quality problem, you can find after-sales service for maintenance.

The millet kettle can't boil water, I personally think that this may be caused by too low voltage, can't boil water, it is recommended to check the voltage of your tea house.

The Xiaomi kettle can't boil the water, it may be that your temperature measuring element is broken and needs to be replaced. Temperature measuring element.

The main reason why the Xiaomi kettle can't boil the water should be that its heating plate is broken or the temperature control is broken. Generally, the frequency of temperature control failures will be a little more.

The millet kettle can boil water, my family just bought one two days ago, it is very good to use, and the quality is also very good.

The Xiaomi kettle can't boil water, this is definitely a problem with the quality, you can consult the after-sales service.

The Xiaomi kettle can't be boiled now, you can check whether there is a power outage in its wiring.

This should be considered to be not burned well or broken, I think to retreat as advance, and then ask customer service, or change one.

Millet kettle, he must add boiling water, otherwise there is no way to operate.

Because this thing may have a temperature problem, or it may be a problem with your thing.

Yang Mi thinks boiling water, I feel that there is something wrong with it, I suggest you go to the manufacturer to ask.

Hello, if this kettle can't boil water, it must be broken, take it to repair or buy a new one.

If the Xiaomi kettle can't boil the water, it should be a problem with its host.

Summary. If you encounter the situation that the millet thermostatic kettle is not heated, it may be that the electrical appliance is faulty, the main consideration is the possibility of poor contact, broken power cord, burned out contactor or damaged heater, in the face of electrical failure, the user can first check whether the circuit and electrical appliances are damaged. In the face of the problem that the millet thermostatic kettle is not heated, if you don't know how to deal with it, you can go to the maintenance center for maintenance, but not all electrical problems can be repaired, sometimes the damage is serious, there is no way to repair, the merchant may suggest that you buy one again, and the millet thermostatic kettle is a one-time product that will not be repaired after the warranty period, and the product will not be repaired after the warranty period.

Hello, I have seen your question and am sorting out the answer, please wait patiently for a minute.

If you encounter the situation that the Xiaomi thermostatic kettle is not heated, but the fiber can be a failure of the electrical appliance, the main consideration is poor contact, the power cord is broken, the contactor is burning and the possibility of the heater being damaged is relatively large, in the face of electrical failure, the user can first check whether the wiring and electrical appliances are damaged. In the face of the problem that the Xiaomi thermostatic kettle is not heated, if you don't know how to deal with it, you can go to the cover maintenance center for maintenance, but not all electrical problems can be repaired, sometimes the damage is serious, there is no way to repair, the merchant may suggest that you buy one again, and the millet thermostatic kettle is a one-time product that will not be repaired after the warranty period, and the product will not be repaired after the warranty period. ”

Summary. Hello, there are four reasons why the Xiaomi instant hot water dispenser does not produce water:

1.The silicone tube in the water dispenser is twisted and the water does not come out, and it is reset.

2.The new water dispenser faucet does not produce water, and the air is discharged with air resistance.

3.The new button type does not produce water; Bad contact, adjustment.

4.The hot water faucet of the old water dispenser does not produce water, and the main thing is that the check valve is changed to a check valve.

These are the four reasons that come to mind, I hope mine is useful to you.

The reason why the Xiaomi instant hot water dispenser does not produce hot water.

Hello, there are four reasons why the Xiaomi instant hot water dispenser does not produce water:1The twisting of the silicone tube in the water dispenser causes no water and resets.

2.The new water dispenser faucet does not produce water, and the air is discharged with air resistance. 3.

The new button type does not produce water; Bad contact, adjustment. 4.The hot water faucet of the old water dispenser does not produce water, and the main thing is that the check valve is changed to a check valve.

The above are the four reasons I think of Hongsong, I hope my filial piety to you.

The first is to check the fuse, the fuse should be at the back of the water dispenser, it is an insulated plastic head, a screwable protruding part, gently unscrewed in the counterclockwise direction, some water dispensers are to open the back cover to find, if there are symmetrical two on the left and right sides of the stool, it is not the fuse base, it is the drainage pipe when cleaning. The fuse is a separate one, and the color is also different. Go and buy two or three according to this model number for later use.

2. Use a multimeter to measure the resistance of the heating tube. If it's low or zero, it should mean that the heating tube is broken. 3. The connector, that is, the plug part may be in poor contact, or the zero line of the plug is short-circuited, so that there is electricity when you guess the socket, and there should be electricity on both wires.

Summary. How to use the millet thermostatic kettle.

Hello dear, the use of the millet thermostatic kettle is as follows:

2. To connect to the Mi Home app, the connection needs to be confirmed on the fuselage, and double-click the "Keep warm" button to avoid connecting to other devices. The top is the current temperature, and the bottom is to set the holding time and temperature.

3. The heat preservation temperature is preset with several temperatures, and also click more to add, at present, there are mainly five temperature modes, coffee, white tea, baby rice powder, milk powder, probiotics, and other temperatures can also be customized.

4. Press the boiling water, after 4 and a half minutes the water is boiled, after the boiling, touch the temperature of the plastic shell with your hands, warm and not hot, to avoid the occurrence of scalding.

How to use the millet thermostatic kettle.

How to use the Xiaomi thermostatic kettleHello dear, the use of the Xiaomi thermostatic kettle is as follows:1. Put the kettle on the base, and connect the front power supply, and connect the Mi Home app on the mobile phone**Mi Home, the connection needs to be confirmed on the fuselage, double-click the "Keep warm" button to avoid connecting to other devices. The top is the current temperature, and the bottom is to set the holding time and temperature.

3. The heat preservation temperature is preset with several temperatures, and also click more to add, at present, there are mainly five temperature modes, coffee, white tea, baby rice powder, milk powder, probiotics, and other temperatures can also be customized. 4. Press the boiling water, after 4 and a half minutes, the water belt type between the Huixing shooting is boiled, after burning, touch the temperature of the plastic shell with your hands, warm and not hot, to avoid the occurrence of scalding. Hope it helps.

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your work is very important to me, and your support is also the dynamic and vertical momentum of my progress. Finally, I wish you good health and a good mood!

Nowadays, there are a variety of feeding supplies on the market, and many families will add a thermostatic kettle in order to better feed the baby, so that it will be much more convenient for parents to make milk powder for their babies. And Xiaomi launched a thermostatic kettle with intelligent thermostatic function has attracted a lot of attention, but people encounter some problems during use, so how to maintain the millet thermostatic kettle if it is not heated? Let's take a look.

The Xiaomi thermostatic kettle can set the temperature on the mobile phone, which is very convenient to use, after boiling the water, you can also adjust the temperature to the temperature you want, and the boiled water can maintain the set temperature for more than ten hours. If you encounter the situation that the millet thermostatic kettle is not heated, it may be that the electrical appliance is faulty, and the main considerations are poor contact, power cord disconnection, and contactor.

The possibility of burnout or heater damage is relatively large, in the face of electrical failure, the user can first check whether the wiring and electrical appliances are damaged.

In the face of the problem that the millet thermostatic kettle is not heated, if you don't know how to deal with it, you can go to the maintenance center for maintenance, but not all electrical problems can be repaired, sometimes the damage is serious, there is no way to repair, the merchant may suggest that you buy one again, and the millet thermostatic kettle is a one-time product that will not be repaired after the warranty period, and the product will not be repaired after the warranty period.

The kettle is a more commonly used item in our life and life, because it is more convenient and quick to use, so it will be welcomed by many people. The thermostatic kettle is also a kind of kettle, but the thermostatic kettle can make the temperature of the water constant, but there will be some failures in the process of using the thermostatic kettle, such as the kettle is not kept warm, so how to keep the millet thermostatic kettle not insulated? For this problem, follow me to understand it below.

APP, when connecting, you need to confirm on the body of the Xiaomi thermostatic kettle, click the "Keep warm" button, to avoid connecting to other devices, and then you can set the heat retention time and temperature.

Generally speaking, the millet thermostatic electric kettle can be heated to boiling in just five minutes, and the heat preservation time can be as long as 12 hours or so each time, everyone will boil the water in the morning, and you can also drink the water at the set temperature at night, which can be said to be very convenient, but the Mijia thermostatic electric kettle is a double-layer structure.

It only supports physical insulation for a short period of time, and if you want to keep warm for a long time, you need to plug in the operation.

In addition, after mastering the correct use of the Xiaomi Hengfan Sparrow heating kettle, the kettle still does not keep warm, it is the electrical failure, such as the damage to the electric heating pipe, can not keep the water temperature at a constant temperature, this situation is generally the need to replace the electric heating pipe.

Hello staring socks! If the key of the Xiaomi thermostatic kettle does not respond, it may be that the button is out of order, or the kettle is malfunctioning. It is recommended that users go to the repair shop for repair, or contact after-sales service.

The working principle of the electric kettle is that the water vapor generated when the water boils deforms the bimetal sheet of the steam Kai excitation temperature sensing element, and this deformation pushes the power switch to power off through the lever principle. It is not self-resetting when it is powered off, so the kettle will not automatically reheat after the power is off.

Summary. The working principle of the electric kettle is that the water vapor generated when the water boils deforms the bimetal sheet of the steam temperature sensing element, and this deformation pushes the power switch to power off through the lever principle. It is not self-resetting when it is powered off, so the kettle will not automatically reheat after the power is off.

Electric kettles were born in Chicago in 1891. With the development of science and technology, fast, safe, convenient, and full use of energy have increasingly become the main characteristics of the kettle, and the British people who love tea have fallen in love with it since then. In the 21st century, it has become a bestseller in the world.

The electric kettle adopts steam intelligent induction temperature control, which has the functions of automatic power-off after water boiling and anti-dry-boiling power-off. With the needs of life, the current electric kettle is also developing in the direction of multi-function, such as leak-proof, anti-scalding, water locking, etc. The electric kettle has the advantages of fast heating speed, good heat preservation effect, strong filtration function and many styles.

It is made of aluminium sheet and stretched, and the electric heating element is made of water-immersed nickel-plated steel sealed electric heating pipes.

Hello, you are the temperature switch is broken.

The automatic power-off function of the self-staring electric kettle is generally realized by the temperature controller in the form of a bimetal sheet located in the upper part of the cup and inside the handle of the smart liquid, and there is no relay filial piety device, thermistor in it, and the steam temperature can reach the disconnection point of the temperature controller after the water boils.

The working principle of the electric kettle is that the water vapor generated when the water boils deforms the bimetal sheet of the steam temperature sensing element, and the deformation of the dust gear pushes the power switch to power off through the lever principle. It is not self-resetting when it is powered off, so the kettle will not automatically reheat after the power is off. Electric kettles were born in Chicago in 1891.

With the development of science and technology, fast, safe, convenient, and full use of energy have increasingly become the main characteristics of the kettle, and the Englishmen who love tea have fallen in love with it since then. In the 21st century, it has become a bestseller in the world. The electric kettle uses steam smart brother to induct temperature control, which has the function of automatic power off after water boiling and anti-dry boiling.

With the needs of life, the current electric kettle is also developing in the direction of multi-function, such as leak-proof, anti-scalding, water locking, etc. The electric kettle has the advantages of fast heating speed, good heat preservation effect, strong filtration function and many styles. It is made of aluminium sheet and stretched, and the electric heating element is made of water-immersed nickel-plated steel sealed electric heating pipes.

It is recommended to take it to a repair point for replacement.

Summary. 1. Most of them are the problem of temperature control, because temperature control is the heart of the entire electric kettle, and its main function has been to control the water to automatically disconnect from the power supply, or connect the power supply, and accept the corrosion of steam for a long time, resulting in the deformation and rust of the temperature control spring steel sheet, so that the power failure or power on can not be normal;

The Xiaomi portable electric hot water cup does not heat.

1. Most of them are the problem of temperature control, because temperature control is the heart of the entire electric kettle, and its main function has been to control the water to automatically disconnect from the power supply, or connect the power supply, and accept the corrosion of steam for a long time, resulting in the deformation and rust of the temperature control spring steel sheet, so that the power failure or power on can not be normal;

2. If the electric kettle is energized and the heating plate is not heated, this fault should consider what material the electric kettle is. If it is a plastic kettle, it is generally enough to replace the heating plate directly; However, if it is a stainless steel kettle, it is estimated that the entire steel kettle body of the electric kettle will be scrapped, because the heating plate of the stainless steel body is welded and there is no way to replace it.