Subject 2: Can you aim with one eye when reversing into storage?

Haha, I just aimed with my left eye, basically no need to adjust, just go in.

Find the right point, get the steering wheel right, and control the speed. Take the example of pouring from the right. When you start to pour, find the point where you want to start hitting the steering wheel, and beat the steering wheel for a circle and a half, that is, to kill, when you die, because the friction between the wheels and the ground becomes larger, the car is easy to stop, at this time lift some clutches, do not let the car stop.

Slowly poured, at this time there are three situations, one is early, through the right rearview mirror to observe the body from the right line is getting closer and closer, it is expected that the right rear wheel will be pressed to the line, at this time the steering wheel back half a circle, if still continue to approach, and then the appropriate amount of back, when the wheel to enter the library, immediately the steering wheel to the right to kill, observe the right rearview mirror body timing, the steering wheel back to the right;The second is just to get in, and the body will return to the steering wheel at the right time;The third is late, at this time, although the steering wheel is killed to the right, observe whether the left rearview mirror body can enter the library: if you can, wait until the wheels are about to enter the library, quickly turn the steering wheel back to the left (more than one and a half turns, the wheel timing is one and a half circles, then let the wheels to the left), until the body is timed, and then the steering wheel back to the right;If you find that you can't get in, then you have no choice but to go back and start again.

Subject 2 can be monocular aim,But it's good to close it for two or three seconds, it's better not to close it for a long time, there will be a camera inside the car to take pictures.

Everyone's understanding of the location of the point is not the same, especially the new students have a very vague concept of the point, and they can't figure out "which point" is the "right point" for themselves.

Subject 2 Exam Skills.

1.Seat position: After getting into the car, you should adjust the seat position and rearview mirror. It is especially important to adjust the seat, as the position of the front and rear is different, the height is uncertain, and the point of view is also different. Everyone is different in height and has different requirements for the seat position.

2.Fixed sitting posture: sit upright and straight, and lean forward and lean, and see the point is not the same. Students should fix the correct sitting posture, develop a habit, and do not change at will, so as to ensure that the point is the same every time.

3.Steady speed: Hit the steering wheel at the same point.

If the speed of the car is different, the results can still vary greatly. In the unified project, it is necessary to stabilize at a certain speed, not to be fast and slow, fast last time and slow this time.

The most accurate time to reverse the direction of the library.

The first point: when the lower edge of the left rearview mirror coincides with the yellow line, the steering wheel is killed to the right, the second point: look at the right rearview mirror, when the distance between the garage corner and the body is less than two fingers, return half a circle to the left, the third point: look at the left rearview mirror, see the rear corner of the left library, and immediately return to the positive direction.

The fourth point: stop when the lower edge of the left rearview mirror covers the yellow line in front of the library.

When the vehicle enters the parking position and adjusts the position of the body, we look at the position of the left rearview mirror and the side line to find the most accurate point of parking after entering the warehouse.

Generally speaking, it is most accurate to use the rearview mirror, wait for you to pour into the warehouse, continue to slowly reverse, and stop when the lower edge of the rearview mirror just covers the right-angled edge next to it.

After entering the warehouse, it is most accurate to see which point to park.

Exam content.

1. Pour it into warehouse B from the starting point A and stop it.

2. Go to the return area C and stop steadily.

3. Pour into warehouse B from the return area and stop steadily.

4. Return to A from library B and the exam is completed.

Judging criteria. 1. Those who do not follow the prescribed route and sequence are not qualified.

2. The body is out of the line, reversing is not entering, and stopping halfway is unqualified.

3. More than 4 minutes without completing the reversing and warehousing is unqualified.

There are three most common methods of reversing, the first is the "non" type of reversing into storage, which is common in various hypermarkets. The second is the "one" shape on the side of the road reversing into storage, which is often referred to as side parking. The third type is the less common diagonal type of reversing storage.

70% of the accompanying students think that it is more difficult to park on the side.

1. "Non-font" reversing into storage.

Non-font "reversing into the garage vehicle and their own parking space to be in a vertical position, their own vehicle B column, with the first parking space as a reference, can basically reverse into the third parking space.

This method of position, more suitable for novice drivers, the advantage is that it is easy to grasp the position at one time, the disadvantage is that it is more mechanical, if there are more vehicles on both sides or the position is narrower, it needs to be adjusted many times. Most of the accompanying drivers responded to this kind of reversing.

Libraries are more common and easier to learn.

2. "Slotted" side parking.

Slotted "side parking, is the car in front as a reference, align the body, right steering wheel, when the angle of the two cars in 45 degrees, the observation process back to the steering wheel back, if the estimate is appropriate, just one time carrying.

This method often needs to occupy the lane, so many accompanying driving students in the process of reversing the car are originally very good, but as soon as the rear car honks, it completely loses its rhythm, which can easily lead to failure.

3. Diagonal parking.

These two kinds of reversing into the garage generally take one or two lessons, and the accompanying driving students can master it more proficiently, of course, there are some diagonal parking or irregular parking, which will not be repeated here, in the accompanying driving course.

will be given to the accompanying students to practice one by one.

Look at the lower edge of the rearview mirror and the first horizontal line of the garage when it is basically parallel to the park, just practice a few more times.

The most accurate time to reverse the direction of the library.

The first point: when the lower edge of the left mirror coincides with the yellow line, the steering wheel is dry.

Kill to the right, <>

The second point: look at the right rearview mirror, when the distance between the garage corner and the body is less than two fingers, go back half a circle to the left, <> the third point: look at the left rearview mirror, do not do pin to see the nonsense to the left corner of the garage, immediately return to the right direction.

The fourth point: stop when the lower edge of the left rearview mirror covers the yellow line in front of the library.

The first point is the "steering wheel dead point", whether it is the left or right inverted library, the dead point of the steering wheel is the most critical reference point, if this point is not right, even the opportunity to correct in the later stage can not be found, 99% will press the corner of the library resulting in failure. It is not difficult to find this point, as long as the position relationship between the lower edge of the left rearview dust trouser mirror and the end line of the library is determined, height is the X factor with the greatest variable, and there is a big difference between the height of 1.8 meters and 1.6 meters, which determines whether the lower edge of the rearview mirror coincides with the upper edge of the end line or the lower edge.

The second point is the "back to the right point", the main purpose of the back point is to make the body of the garage to be righted, when returning to the right to quickly turn the head to observe the left and right rearview mirrors, see the left and right sides of the garage and the moment the body is parallel, immediately back to the right; The body may not be in the center position, which requires students to learn to adjust, observe the distance in the left and right rearview mirrors, which side is wide to hit the steering wheel, and continue to observe the distance between the two sides after playing, when the left and right distances are equal, you can return to the center again.

The third point is the "parking point", if the parking point is not well mastered, the rear of the car touches the rear line, and it will also be judged to fail; The way to find the parking spot is similar to the "steering wheel dead point" Li Yao, both of which use the position relationship between the lower edge of the left rearview mirror and the edge line of the garage front, but the side line here is the front of the garage rather than the garage end line in the first point. The biggest x-factor is also height, which can be easily found and memorized by students as long as they maintain a consistent sitting posture.

After remembering these three points, the difficulty of reversing into the warehouse will be greatly reduced; In order to let the students quickly find and remember these three points, you can stop the car at these three points, let the students get out of the car to observe the position of the body and get on the car many times for actual practice; In addition, we must learn to "fine-tune", after all, many times the "point" card is not very accurate, or sooner or later will lead to the body is not correct or there is a hidden danger of pressing the storage angle, timely return to the steering wheel (half a circle or a circle) for fine-tuning, after fine-tuning the perfect parking in the warehouse, it can be regarded as truly mastering the ability to reverse into the warehouse!