How to do a good job of dry and wet separation in the bathroom of the renovated house? What are the

You can install a glass door in the bathing place to separate dry and wet. Bathrooms with large spaces can be partitioned with solid walls, and bathrooms with small spaces can be partitioned with semi-glass or all-glass doors.

If you want to do a good job of separating dry and wet in the bathroom, you can set up the handwashing station outside the bathroom, so that washing and going to the toilet will not be disturbed, and then the bathing place will be partitioned; The washbasin can be set up outside the bathroom, and then the bathing area is partitioned with glass, so that it can have the effect of separating dry and wet, and the decoration will be particularly high-end.

When separating dry and wet, the shower room and washroom should be separated, so that the bathroom can be better used. You can add WeChat and then divide it into two areas, one area is placed with Lingyu and the other area is placed with toilets and sinks, so that dry and wet can be better separated, and the bathroom can be better used.

How should <> bathroom be decorated? How to do a good job of dry and wet separation?

1.When decorating the bathroom, the first thing to do is to make a reasonable space layout for the bathroom. In bathroom decoration, a common method is to separate dry and wet bathrooms.

The separation of dry and wet can not only ensure the normal use of the toilet function, but also increase the sense of space in the toilet to a certain extent. Choosing a glass partition bathroom can not only achieve the partition effect, but also effectively waterproof, and truly achieve dry and wet separation. Waterproofing is an important part of bathroom decoration.

When the bathroom is waterproofed, do not destroy the original waterproof layer of the bathroom, so as not to affect the normal use in the future. Secondly, when carrying out the waterproofing project of the bathroom, it is necessary to determine the waterproof height of each part of the bathroom. After the completion of the toilet waterproofing project, it is necessary to conduct a closed water test on the toilet to check whether the waterproof project of the toilet is qualified.

The ceiling of the bathroom should also be decorated with waterproof materials.

2.The main source of water vapor in the bathroom is from the shower area, so the easiest and quickest way is to hang a shower curtain with a water baffle underneath. This combination can basically isolate the water flow, is simple and convenient to install, and is a very practical method at a low cost.

Water barriers are usually artificial stones that are fixed to the ground. Removable plastic flaps are also very popular because they are easy to install. The only thing to note is that there should be enough space in the shower area to avoid touching the shower curtain when taking a shower.

I don't think the water barrier is good enough. You can also try to sink in a damp place. The shower area is divided by the height difference, and the shape is simple, and the water flow is not easy to spread from low to high.

3.How should <> bathroom be decorated? How to do a good job of dry and wet separation?

Even if the layout and furniture of our home are the same as those of other people's homes, the choice of direction when we place them will make it bring us a sense of practicality and its comfort very different. If we place the sink near or across from the door, the two ways will give us different feelings. If you want to design a bathroom at home, you must use the house type reasonably and appropriately.

If the bathroom is rectangular, the shower room is designed to be located in the innermost position, and the toilet and sink are located outside, which not only deals with the problem of separating dry and wet, but also better protects your privacy.

Bathroom decoration should pay attention to waterproofing and sewerage, do a good job of waterproofing in order not to seepage, do a good job of sewerage in order not to reverse water. If you want to do a good job of separating dry and wet, you must first plan the area, and then separate it with some items to distinguish the dry area from the area of bath water.

When decorating, it is necessary to decorate according to the space and size of the bathroom. When separating wet and dry, it is necessary to separate the area relative to the current area, and then set up some barriers in the shower area, and also place some handwashing stations in the washing area, and also place toilets.

When decorating the bathroom, it is necessary to choose decoration materials of different colors and materials according to the overall pattern and the size of the bathroom, and also to do a good job of separating dry and wet; First of all, make sure that the bathroom is dry, install an exhaust fan or air heating system, and you can also install a shower curtain or a sliding door.

When the bathroom is decorated, you can do a good job of dry and wet separation, you can choose two separation method, three separation method or four separation method, which can be selected according to the space of the bathroom. When you are designing, you can think about how to maximize the utilization of the entire space. <>

If you don't do dry and wet separation, it will affect the efficiency of the entire bathroom. If you choose the separation method, then you can choose to use the toilet or the washing area as the dry area, and naturally the bathing becomes a wet area. You can also choose to wash up as a dry area and the other two places as wet areas.

One of the great benefits of this approach is that it is done more thoroughly. If you choose the three-separation method, then it will be simpler, you only need to separate the three places without interfering with each other, so that each place can have a certain space. However, this separation method has certain requirements for the space of the bathroom, and if the space is too small, it will only make the whole look more crowded.

When doing dry and wet separation, you can choose a very simple glass. The glass can choose a full partition or a half partition, and one of the most important problems is waterproofing, so you can install waterproof strips or design a certain slope in the bathroom and washing area, so that the water can flow directly to the floor drain. <>

When doing dry and wet separation work, if the shower curtain is used as a partition, then it is not only economical and beautiful, but also particularly affordable, and the most important thing is that the water in the bathroom must not be affected by the shower curtain. We must install waterproof strips with good waterproof effect, but this method of separating dry and wet requires timely ventilation to prevent a large number of bacteria. Regardless of whether you use a full partition or a half partition, a large amount of moisture will be generated after bathing, in which case you can equip the bathroom with an exhaust system.

1.Use decoration partitions to do a good job of dry and wet separation. Decoration partition is one of the most common techniques for wet and dry separation, and it will not jeopardize the overall lighting.

2.Use the shower room to do a good job of separating dry and wet. The water caused by the bath will not splash out, and it will be easier to clean.

3.Divide the dry area completely. Place the dry area directly at the entrance and the toilet and bathing area in the toilet.

Pay attention to waterproof works and floor drain treatment.

The bathroom can be separated by glass to separate dry and wet, and it should be noted that the waterproof function of the floor drain and the porcelain tile should be done, otherwise it will seep water under the porcelain tiles after a long time.

Nowadays people are paying more and more attention to decoration. The reason is that with the improvement of living standards, people's pursuit of quality of life is getting higher and higher, and some details of decoration are also paying more and more attention. Take bathroom décor as an example.

To achieve a decorative effect, some people choose to separate wet and dry, while others do not. The separation of wet and dry in the bathroom will make the bathroom look more beautiful and upscale.

The bathroom with separate wet and dry looks elegant and beautiful at first glance. It is usually designed, and this beauty is also reflected in the fact that after bathing, if there is no separation of dry and wet, it will flow to the ground and get wet everywhere. However, if you do wet and dry separation, it won't happen outdoors.

Separation of wet and dry in the bathroom will make the bathroom cleaner. In general, there will be shelves in the bathroom. Some homes may use iron, others wood.

However, no matter what kind of material it is, it can be damaged in a humid environment for a long time. Iron rusts and wood gets moldy.

Long-term dampness in the bathroom can also breed a lot of bacteria, so separating dry and wet will make the bathroom cleaner. It is common practice to use the shower room as a partition, separating only the wet area where the shower room is located from the remaining dry area. Suitable for larger restrooms.

The ** of the custom shower room is slightly higher. There are 3,000 10,000 on the market**, which can be selected according to your budget. Choose 3C-certified tempered glass and durable profiles to avoid hidden dangers and prolong the use of the shower.

Complete wet and dry separation is the process of moving the outside of the washstand to the aisle and dividing the restroom into two separate spaces. This approach can be said to be once and for all. It can not only expand the area of the bathroom, but also meet the needs of many people to wash at the same time.

The most important thing is to reduce the multiplication of bacteria. It is not afraid to put dental utensils directly on the laundry table. The separator can also be used directly for wet and dry separation.

If your home bathroom is large enough to accommodate a wall, you might consider using a half-wall to separate the wet and dry areas. When constructing a wall, the shape or storage area can be designed as needed to further enhance its effect.

You should choose dry and wet separation, you can move the sink in the toilet to the outside of the bathroom, so that the space in the bathroom will become very large, and at this time, the dry and wet separation will be particularly spacious, and you can choose some pebbles on the ground.

First of all, we can choose a corner of the bathroom, and then use glass to enclose this corner, so that you can do a good job of dry and wet separation, if you want to design better, you will design according to your own style, and then you can also draw some patterns on this glass. And be sure to do a good job of ventilation and exhaust holes.

The bathroom should choose dry and wet separation, which is more convenient, and the design style must be designed in a simple style.

Dry and wet separation should be chosen, and it is best to put the sink outside, so that it can be better used and can increase the utilization rate of the bathroom.