How to separate dry and wet bathroom decoration? What should I pay attention to?

When the bathroom is decorated, you can do a good job of dry and wet separation, you can choose two separation method, three separation method or four separation method, which can be selected according to the space of the bathroom. When you are designing, you can think about how to maximize the utilization of the entire space. <>

If you don't do dry and wet separation, it will affect the efficiency of the entire bathroom. If you choose the separation method, then you can choose to use the toilet or the washing area as the dry area, and naturally the bathing becomes a wet area. You can also choose to wash up as a dry area and the other two places as wet areas.

One of the great benefits of this approach is that it is done more thoroughly. If you choose the three-separation method, then it will be simpler, you only need to separate the three places without interfering with each other, so that each place can have a certain space. However, this separation method has certain requirements for the space of the bathroom, and if the space is too small, it will only make the whole look more crowded.

When doing dry and wet separation, you can choose a very simple glass. The glass can choose a full partition or a half partition, and one of the most important problems is waterproofing, so you can install waterproof strips or design a certain slope in the bathroom and washing area, so that the water can flow directly to the floor drain. <>

When doing dry and wet separation work, if the shower curtain is used as a partition, then it is not only economical and beautiful, but also particularly affordable, and the most important thing is that the water in the bathroom must not be affected by the shower curtain. We must install waterproof strips with good waterproof effect, but this method of separating dry and wet requires timely ventilation to prevent a large number of bacteria. Regardless of whether you use a full partition or a half partition, a large amount of moisture will be generated after bathing, in which case you can equip the bathroom with an exhaust system.

1.Use decoration partitions to do a good job of dry and wet separation. Decoration partition is one of the most common techniques for wet and dry separation, and it will not jeopardize the overall lighting.

2.Use the shower room to do a good job of separating dry and wet. The water caused by the bath will not splash out, and it will be easier to clean.

3.Divide the dry area completely. Place the dry area directly at the entrance and the toilet and bathing area in the toilet.

Pay attention to waterproof works and floor drain treatment.

The bathroom can be separated by glass to separate dry and wet, and it should be noted that the waterproof function of the floor drain and the porcelain tile should be done, otherwise it will seep water under the porcelain tiles after a long time.

Most people like to separate the dry and wet bathrooms when decorating, and the main purpose is to be able to have pattern planning. With the continuous improvement of many people's living standards, the requirements for decoration are also relatively high. However, if you want to do dry and wet separation for small apartment decoration bathrooms, there are still many precautions, and I hope you still have to make plans.

If the separation of dry and wet seems to be more depressing in the whole bathroom, it will also be particularly troublesome.

However, if you do not separate dry and wet, there will be a lot of water vapor when you take a bath in the bathroom, and it will not be easy to emit out. In particular, children and the elderly will accidentally slip when they accidentally enter the bathroom, which will cause potential safety hazards. Therefore, the separation of dry and wet can not only play the role of space partition, but also play a role in safety.

For the bathroom of a small apartment, when doing dry and wet separation, you can find a professional designer to design. There is partition separation, there is shower curtain separation, and there will be tempered glass separation.

However, for ordinary people, it must be exquisite when decorating, economical and practical. It is also more convenient to do simple dry and wet separation, and it is very practical to directly make tempered glass for customization. If you close the door when you take a shower, you can still use the outside sink and you won't let the water splash everywhere during the shower, which can cause water vapor to grow.

If you don't do dry and wet separation, I believe everyone will have such troubles, every time you take a shower, the bathroom is all foggy, and the floor is also very wet.

If you want to refuse to splash water or have moisture on the ground when using the shower room, in fact, the shower curtain is also very good, and the shower curtain is better and warmer for decoration. If you don't want to use it, you can put it away, which is much more convenient in comparison, and it can also effectively refuse water stains when taking a bath. It is recommended that when you decorate, the bathroom should still be designed with a sense of classification, if the water stains flow everywhere, it will definitely affect the quality of the handwashing station.

It will also increase the effect of rottenness, and even cleaning is more difficult.

Basic interior decoration method: dry and wet partition dry and wet separation is the basic interior decoration method of the bathroom, separating dry areas such as basins and toilets from wet and cold areas such as showers and bathtubs. This type of design can also improve the efficiency of daily life, as the main members of the household can use the bathroom at the same time during the morning rush hour.

The layout of the dry and wet partitions of the toilet is separated from the design scheme: shower area and washing area; Three separation design schemes: washing area, toilet area, shower area; Four separate design schemes: washing area, toilet area, shower area, and changing area.

The common decorative partition of the single overall shower room is the use of glass sliding door, and the explosion-proof glass and explosion-proof type are solved, and the design scheme of the entrance door can eliminate potential safety hazards. If you don't have a separate overall shower room, you can choose a glass partition wall between the shower area and the dry area, which looks refreshing and translucent visually, and is less and less limited by space. In addition, if you want an economical way to separate, you can use a bathroom shower curtain to decorate the partition.

The moisture-proof bathroom shower curtain can be taken and placed anytime and anywhere, and the assembly is simple, which is suitable for small bathroom dry and wet partitions. At the same time, the shower curtain in the bathroom should be cleaned and dried on time to prevent mold and bacteria.

Removal of the washing area; When decorating, plan the washing area in advance, and use the aisle space or the washing area next to the shower room to build a half-wall partition to create a wet area and achieve efficient dry and wet partitioning.

How to choose a bathroom basin? The assembly of the integrated basin is more convenient and fast, there is no gap for hiding dirt, and it is convenient to clean, but it is also relatively heavy, and there is no great individualization option. The design of the Taichung basin is more colorful, the assembly is simple, it is conducive to cleaning, and the appearance is stronger; At the same time, the design of the double washbasin is more conducive to improving the efficiency of daily life.

The width of the wash basin is 90cm, the height is 105cm, the counter surface is 75-80cm from the ground, and the relative height of the bath mirror from the ground is 135cm.

The wall-hung toilet compares with a traditional toilet to make the space feel softer. The wall-hung toilet does not contact with the road surface, of course, to prevent dirty mess and is conducive to cleaning. Toilet size: The toilet generally occupies 37cm-60cm, and the distance from the washbasin should be around 20cm.

In-wall faucets save space on countertops and make the space more flexible and exquisite, and this type of design solution is suitable for narrow countertops and can release a lot of space. Electric towel rack, good friends in the south have undoubtedly used, when it is not easy to dry in rainy weather, use it to immediately dry and process home accessories, and never be afraid of resurgence. The defogging mirror is really a big one in the bathroom, the traditional bathroom mirror is surrounded by heat, and the fog and water droplets hanging on the mirror glass are directly related to the experience.

I think it should be decorated with brightly colored floor tiles. You can choose European and American styles. There is a toilet on the inside and a toilet on the outside.

First of all, the toilet is placed by the door, the bathroom cabinet is in the middle, and the shower is on the innermost side, and then a shower curtain can be hung around the shower to separate the dry and wet.

I think it should be done with wet and dry separation. For example, use a water retaining strip to arrange it, or use a countertop basin. The other is a bidet toilet.

How should <> bathroom be decorated? How to do a good job of dry and wet separation?

1.When decorating the bathroom, the first thing to do is to make a reasonable space layout for the bathroom. In bathroom decoration, a common method is to separate dry and wet bathrooms.

The separation of dry and wet can not only ensure the normal use of the toilet function, but also increase the sense of space in the toilet to a certain extent. Choosing a glass partition bathroom can not only achieve the partition effect, but also effectively waterproof, and truly achieve dry and wet separation. Waterproofing is an important part of bathroom decoration.

When the bathroom is waterproofed, do not destroy the original waterproof layer of the bathroom, so as not to affect the normal use in the future. Secondly, when carrying out the waterproofing project of the bathroom, it is necessary to determine the waterproof height of each part of the bathroom. After the completion of the toilet waterproofing project, it is necessary to conduct a closed water test on the toilet to check whether the waterproof project of the toilet is qualified.

The ceiling of the bathroom should also be decorated with waterproof materials.

2.The main source of water vapor in the bathroom is from the shower area, so the easiest and quickest way is to hang a shower curtain with a water baffle underneath. This combination can basically isolate the water flow, is simple and convenient to install, and is a very practical method at a low cost.

Water barriers are usually artificial stones that are fixed to the ground. Removable plastic flaps are also very popular because they are easy to install. The only thing to note is that there should be enough space in the shower area to avoid touching the shower curtain when taking a shower.

I don't think the water barrier is good enough. You can also try to sink in a damp place. The shower area is divided by the height difference, and the shape is simple, and the water flow is not easy to spread from low to high.

3.How should <> bathroom be decorated? How to do a good job of dry and wet separation?

Even if the layout and furniture of our home are the same as those of other people's homes, the choice of direction when we place them will make it bring us a sense of practicality and its comfort very different. If we place the sink near or across from the door, the two ways will give us different feelings. If you want to design a bathroom at home, you must use the house type reasonably and appropriately.

If the bathroom is rectangular, the shower room is designed to be located in the innermost position, and the toilet and sink are located outside, which not only deals with the problem of separating dry and wet, but also better protects your privacy.

Bathroom decoration should pay attention to waterproofing and sewerage, do a good job of waterproofing in order not to seepage, do a good job of sewerage in order not to reverse water. If you want to do a good job of separating dry and wet, you must first plan the area, and then separate it with some items to distinguish the dry area from the area of bath water.

When decorating, it is necessary to decorate according to the space and size of the bathroom. When separating wet and dry, it is necessary to separate the area relative to the current area, and then set up some barriers in the shower area, and also place some handwashing stations in the washing area, and also place toilets.

When decorating the bathroom, it is necessary to choose decoration materials of different colors and materials according to the overall pattern and the size of the bathroom, and also to do a good job of separating dry and wet; First of all, make sure that the bathroom is dry, install an exhaust fan or air heating system, and you can also install a shower curtain or a sliding door.

<>1. Bathroom decoration should be separated from dry and wet

We all know the important position of the bathroom in the home, it is used every day, and the area of the bathroom at home is not particularly large, so at this time the separation of dry and wet is needed, but we have to design it well. You will find some traditional methods, that is, the bathroom is not isolated as one, so that the ventilation conditions of the bathroom may not be good, and the water is also very much, we all know that the water in the bathroom is particularly humid, it may become moldy for a long time, and it is more difficult to clean, which will affect people's health. Nowadays, people's quality of life is improving, so the requirements for some are relatively high, so to make life convenient and healthy, there is the concept of dry and wet separation, which is to separate the bathing place from other places, so the shower area and other functions should be separated.

The rest of the bathroom should be kept dry and the bathroom is wet.

Second, it is more convenient to live

So at this time, it is better to separate, and you will find that the bathroom has several places for washing, as well as a place for bathing, and the toilet needs water, so this place can be put together, but the toilet or changing places can be separated, and these places do not need to sleep. People will make some partitions inside, use glass or other methods to separate it from wet and dry, so this method is also more common and convenient. This kind of decoration at home is very good, so we will make the whole bathroom look more atmospheric, air circulation is more convenient, and there will be no feeling of wetness, so that the overall life is more convenient.

Bathroom decoration should be dry and wet separation We all know the important position of the bathroom in the home, it should be used every day, and the area of the bathroom at home is not particularly large, so at this time the separation of dry and wet is needed, but we have to design it well. You will find some traditional methods, that is, the bathroom is not isolated as one, so that the ventilation conditions of the bathroom may not be good, and the water is also very much, we all know that the water in the bathroom is particularly humid, it may become moldy for a long time, and it is more difficult to clean, which will affect people's health.