How to do dry and wet separation in the bathroom? How can you design a beautiful bathroom?

You can put the washing machine and dryer on the balcony, so that it is more convenient to dry clothes, and isolate the place where you take a bath and wash the toilet in the bathroom, so that the three-way separation can perfectly achieve the dry and wet separation in the bathroom; You can paste some wallpaper with a more colorful style, which can increase the appearance of the bathroom, and you can use the glass door to block the bathroom.

It is necessary to separate the bathroom in a space, and also use some barriers to seal it, so that the dry and wet can be separated to prevent water vapor from entering other spaces. It can be separated by glass, and it can also be decorated with some other decorations to make the bathroom look better.

Sliding doors can be installed, glass doors can be installed, and dry and wet separation can also be done through the area design of the bathroom. It is necessary to pay attention to the overall layout, but also to match the color, according to the choice of materials, so as to design a high-value bathroom.

I think we can divide the bathroom into two areas, the inside is a bath and toilet area, and the outside is a sink. You can ask a professional design team to design for you according to the pattern.

If the bathroom does not do dry and wet separation, whenever you take a bath, the water will splash everywhere, the wall and the ground are full of water, separating the shower area from the washroom, which not only achieves the purpose of dry and wet partitions, but also ensures good permeability in the bathroom. What's more, the enclosed glass house also blocks odors.

Personally, I prefer the glass isolation method, the glass can be very good to achieve dry and wet separation, both beautiful and atmospheric, it is more convenient to clean, the overall space layout is very fashionable, can make reasonable use of space, and also achieves the effect of dry and wet separation, which is a very good choice; You can use some glass with better materials to divide, and then use some simple accessories to decorate the overall bathroom, reasonably store the space and use the space, and give the people a better experience.

1.If the bathroom area is relatively small, you can use the shower curtain shower curtain, which is not only easy to install, but also very low cost. 2.

Install two sliding doors directly in the shower area to separate the shower area from the handwashing and toilet areas. 3.The whole shower room is a more common way to separate dry and wet in modern families, and the whole shower room can be customized according to the size of your own bathroom.

Dry and wet partition refers to putting the toilet and shower into one area, and the washing area is independent of the outside, which is indeed the dry and wet partition, if you frame the shower room, and then put the toilet and the washing face together, it is called a heartache toilet. It's the key to incorporating it into your home design, but I don't agree with that? The wide toilet is designed with dry and wet partitions, and the theme activity space of the two ranges can also be very spacious, whether it is protected by brick spacing or laminated glass, it is impossible to endanger the application space.

Dry and wet zoning refers to dividing the toilet into 2 areas, one wet and one dry; Bathroom cabinets are placed in the wet area for tooth-shabu cleansing; In the dry area, toilets or squatting toilets and overall shower rooms are placed at the key points.

In the way of regional separation to ensure the delicate separation of the overall space of the bathroom, in which the wet area refers to the washing of face and laundry area, and the dry area refers to the bath area, for the toilet, the visibility of the situation is divided into a dry area, and can also coexist with the dry area, if the toilet space is abundant, it can naturally be divided independently for the toilet.

Dry and wet partitioning is the current trend of toilet decoration design schemes, and there are many ways to do it, but many articles mention that the content is too complicated and obscure. I will give you a design method for the dry and wet partitions of the small bathroom, if it is just right for your home, you can come to find a good design method!

Basically, it can include the method of dividing all the shower rooms into wet and dry areas. There are many names for dry and wet partitions, and we can easily understand that the shower room is blocked by a glass partition wall to complete the separation of the two situations! It is also effective to ensure the outside of the bathroom cabinet on the solid wall, which is also a kind of separation, although its interior decoration cost is very high, but it can fully block the leakage of water vapor and water droplets, which is also the desire of many pot friends are willing to accept, but if there are other methods, I firmly believe that the owners of the community should not be easy to consider making an overall shower room at home.

Looking at the actual effect of the real-life shooting, there are 2 spaces, the washstand is moved to the door of the toilet as a space, and the toilet and shower room in the toilet create a space, and can be used separately without harming each other.

If you want to achieve dry and wet separation, you need to discuss with the staff in advance, and you also need to do a good job of planning and design drawings, so that you can make the style of the whole bathroom look better and perfectly achieve dry and wet separation; Plan ahead, draw designs in advance, prepare the right materials, prepare the right furniture, and choose the right colors.

You can directly partition the shower room with glass, so that you can separate dry and wet well, and try to choose white tiles for decoration.

The bathroom space can be separated, and it can be separated by a glass door, so that dry and wet can be separated. The first step is to measure the space in the bathroom, then find a satisfactory distance, then divide the space and install a glass door, which can separate the wet and dry, and also protect the privacy.

Long-term humidity and moisture condensation in the air, it is easy to breed bacteria, then the toothbrush and towels we use are related to health of daily necessities, but also need to be kept hygienic, so put outside the bathroom can be kept more clean, conducive to health. With traditional bathroom equipment, there is always moisture everywhere after taking a bath, and the humid air stays in the bathroom for a long time, resulting in air pollution. Dividing the bathroom into two and separating dry and wet can keep the venue outside the bath dry and hygienic, and maintain the overall environment of the bathroom clean and beautiful.

In only. In a small bathroom of about four or five square meters, it is not easy to design a bathroom with dry and wet separation properly and reasonably, because it is necessary to take into account many problems of beauty and use, so every detail must be considered properly. To separate dry and wet in the bathroom, first of all, the bathroom area must be large enough, and secondly, the waterproofing must be done well. There are many ways to separate wet and dry, such as shower rooms, glass partitions, wall partitions, etc.

Choose according to each person's preference.

The function is reasonable, in fact, the design you asked is reasonable, the design originally contains function and aesthetics, but your next problem is beautiful, that is, the aesthetic problem, so let's take it apart and look at it, let's talk about function first. Build a solid wall between the wet and dry areas to block the splash of water, which maintains the sanitary partition effect; Although not as aesthetically pleasing and easy to use, it is the most durable design for wet and dry separation. It is a trend in the design of the bathroom to do dry and wet partitions, so that the design not only makes the bathroom not wet, but also convenient for two people to use at the same time.

For example, in terms of practical performance, the washbasin is liberated from the bathroom and placed outside, so that the functional areas will not disturb each other, resulting in the morning rush hour because one person goes to the toilet, and the whole family waits and suffers the pain of not being able to wash. The bathroom area is large enough to set up an integral shower room, and the material can be made of transparent materials such as tempered glass or frosted glass.

You can use some glass when separating, so that the whole bathroom can look very beautiful.

Then there should be enough space and a special method of separation.

It is designed to be made of tempered glass, because tempered glass looks more refreshing and beautiful.

1.There is a selection of decoration partition methods.

Even if there are only 3 guards, there is also the power to separate dry and wet! This is where the necessity of the design scheme comes in

2.The source of the bathroom light is very important.

Large partition walls can darken the shower area, making it necessary to fill in the light source. Only in the bathroom, it is recommended to choose a shower room lighting fixture with waterproof and anti-fog mirrors, so that the professional airtight solution can avoid the ingress of water vapor. Switching power routes and buttons should be arranged in dry areas to prevent all safety risks.

Open as many windows as you can, and the panoramic skylight should not be neglected, as it allows for natural sunlight and a more natural and dry bathroom. In the dim light, the bathroom suddenly looks stylish, plus some potted plants, which is comparable to the hotel restaurant bathroom sanitary ware

3.There is no problem in storage and organization.

There are few items in the bathroom, but there is also a place to live, and the simple and atmospheric alcove storage and organization is very good. The extra wall surface is used for storage and arrangement, filling the gap and improving the multi-functionality of the area, which can be said to kill two birds with one stone. If there are more items, you can add a few yuan baffle, which will not jeopardize the comprehensiveness of the effect.

4.Wood flooring can also be diversified.

Even if the wet area system is already partitioned, the bathroom can be more than just a floor tile. The composite solid wood floor can also step into the bathroom in a bright and bright way, which is clearly distinguished from the bathing area, and also has a unique taste. You can choose teak flooring and wood-plastic flooring with delicate materials.

Carbonized wood flooring, etc., this kind of composite solid wood flooring can also be used in the bathroom for many years through rigorous laying process and waterproofing solutions.

5.Hardware configuration countermeasures should be complete.

The bathroom floor drain is not qualified but the harm is quite deep, the larger the floor drain, the faster the water is naturally better, the usual floor drain has long been unable to achieve the words, can be installed with a strip type floor drain, the hidden floor drain, will not harm the beauty and generosity, at the same time it is also easy to remove. The bathroom floor drain is not qualified but the harm is quite deep, the larger the floor drain, the faster the water is naturally better, the usual floor drain has long been unable to achieve the words, can be installed with a strip type floor drain, the hidden floor drain, will not harm the beauty and generosity, at the same time it is also easy to remove.

However, the top shower weighs 25kg, and the pressure test will be more than 35kg, so the ceiling bearing force is strong enough, and the thickness is best more than 15 cm. The ceiling must be embedded 30 cm to conceal the built-in showerhead.

The above is how to design the dry and wet separation of the small bathroom, and the design scheme of the glass partition wall of the dry and wet separation of the small sanitary ware.

Be sure to determine the decoration style in advance, you should pay attention to the placement of furniture, and you should use some materials with good waterproof effect, and you can also set up an independent bathing area.

I think we must hire a professional designer, and then we should also design according to the layout and structure of the bathroom, and we must do a good job of separating dry and wet.

It is necessary to prepare a curtain, and it is also necessary to make a partition, so that dry and wet can be separated.

Hello, Xiaotianer is happy to answer for you!

brick half-walled

If the space is not well lit, then using brick half-walls is a very good option. Half wall should take into account the problem of lighting, but also to prevent splashing with water, the general height can be set at 1 meter, if the basin to take the decoration method of the basin, the wall can be increased by another 20 30 cm.

Half-wall + glass partition

It is carried out on the basis of semi-partitions, and it is also one of the more popular species nowadays. A new conventional partition is built below, and glass is used for matching above, which not only ensures the problem of lighting, but also divides the sink area, which is more aesthetically pleasing.

In the selection of glass material and transparency, if you pay attention to privacy issues, you can choose Changhong glass, frosted glass and other light-transmitting and opaque materials; If you are more concerned about the brightness and transparency of the space, you can directly use transparent glass, which is a perfect match.

Monolithic masonry wall

As the name suggests, it is to build a new wall to separate the handwashing station from the outside space, and completely hide the handwashing station behind the wall to create a semi-open private space, which is suitable for families who have high requirements for space segmentation and privacy, and the sense of security is instantly full.

The overall masonry wall generally needs to be renovated in hard decoration, and it is necessary to communicate with the designer in advance, and the washbasin countertop can also be expanded according to the wall structure to expand the storage area.

Sidewall storage

The so-called side wall storage, in fact, is to create a niche in the side adjacent wall to solve the storage problem, the general height is about 30 cm, which can easily solve the problem, and does not occupy excess space, but also looks beautiful and natural, simple and atmospheric.

There are no partitions

There are many ways to partition, and naturally you can choose no partition, which can visually expand the space area and has good ornamentation and aesthetics. However, this also means that splashing may occur when using water, so it is recommended to choose a deep sink or wipe the floor in time after using water to avoid slipping.

If you still have questions about decoration, environmental protection, home decoration pollution, home design and layout, etc., you can consult Litian Decoration, and all decoration problems can be answered for you!