How to use the Meiling juicer, what is the matter with the Meiling portable juicer not turning

1. Align the middle frame vertically with the main machine, put it down, and assemble it in place.

2. Align the bottom of the juicing mesh with the motor wheel and press it, force both hands evenly, confirm that the pressure is in place, and rotate a few times to see if there is a scrape in the frame. (Lift is to take it apart).

3. Insert the top cover and buckle the safety buckle. (When buckle the safety buckle, please buckle the upper part of the buckle first, and then press down to buckle in place.) When dismantling, it is just the opposite, please open the bottom of the buckle first, and then you can open the safety buckle).

4. Try the machine to see if the work is normal, if the noise or vibration is too large, you can install it again, and press the juice net into a different direction will have a good effect.

5. Peel and core the vegetables and fruits first, wash them and set aside, and cut them small if the size is larger than the feeding port.

6. Put the juice cup at the juice outlet, and put the large slag hopper at the slag outlet.

7. Turn on the machine, put the fruits and vegetables into the juicer, and press down with the pusher rod to squeeze out fresh and delicious juice.

8. After squeezing out the juice, some juicers have external juice holding devices for the convenience of customers, and they need to pour the juice into their own cups.

9. Pour out the pomace and prepare for cleaning.

First of all, we check the position of the juicer before turning it on. Incline. Whether the body is installed firmly.

Second, cut the ingredients into the right size and put them in. 3. Turn on the power supply, turn on the operation, and it is strictly forbidden to open the upper cover during rotation. After use, cut off the power before disposing of the food.

5. Finally, clean all components. 'Chickens should be cleaned to avoid water flowing into the motor. After cleaning, place the juicer in a ventilated place out of direct sunlight and dry it safely.

If you want to use Meiling juicer, first improve the charging power supply, and then click there, you want to bomb a city, and then click to confirm.

Summary. Hello dear. The reason why Meiling portable juicer does not turn may be 1, reason 1:

No electricity Portable juicers usually don't work because there is no electricity, so many friends will think that the portable juicer is broken. At this time, it is only necessary to recharge the machine again, and there are no problems with the machine. 2. Reason 2:

Damage to internal parts Compared with household electric juicers, portable juicers are more likely to break, because its material is fragile, wear and tear when used, and if you don't pay attention, it is easy to twist or break. 3. Reason 3: Too many fruits After all, the volume of the portable juicer is relatively small, so when in use, too many fruits can not be placed, which will cause the phenomenon of stuck, thereby damaging the internal mechanical structure, and eventually causing the portable juicer to break.

It is recommended to choose the number and volume of the fruit according to the standard of the manual, and if it is too large, you can cut it small before putting it. Hope it helps you and I wish you a great life.

Please wait patiently for 3 minutes, we are sorting out, and we will answer you immediately, and please do not end the consultation.

Hello dear. The reason why the Meiling Zaochang portable juicer does not turn may be 1. Reason 1: No electricity The portable juicer usually does not operate because there is no electricity, so many friends will think that the portable juicer is broken.

At this time, it is only necessary to recharge the machine again, and there are no problems with the machine. 2. Reason 2: Damage to internal parts Compared with household electric juicers, portable juicers are more likely to break, because its material is fragile and wears a lot when used, and if you don't pay attention, it is easy to twist or break.

3. Reason 3: Too many fruits After all, the volume of the portable juicer is relatively small, so when using the hidden smile chop, too many fruits can not be placed, which will cause the phenomenon of stuck, thereby damaging the internal mechanical structure, and eventually causing the portable juicer to break. It is recommended to choose the number and volume of the fruit according to the standard of the manual, and if it is too large, you can cut it small before putting it.

Hope it helps you and I wish you a great life.

It takes 4-5 hours to charge

In general, the charging time of different models is completely different, some juicer bottles are larger and need to be charged for 4-5 hours, and some juicer bottles are smaller and have less power, and they need to be charged for 2-3 hours, so in the process of purchasing, be sure to consult the merchant in detail.

Summary. Hello, you can. The detailed operation is as follows:

The following is how to use Meiling water dispenser:1Get your water dispenser ready:

Place the water dispenser on level ground and plug it in, making sure the plug is tight and plugged in tightly to ensure a safe grounding. 2.Add water:

Place the water bucket on the water dispenser, and open the lid of the bucket, pour the clean drinking water into the bucket, and make sure that the amount of water added does not exceed the capacity of the bucket. Then close the lid of the water bucket and place it stable. 3.

Power on: Press the switch button on the water dispenser to start the water dispenser, and wait for the water dispenser to start successfully. 4.

Start taking water: Place the cup or kettle under the water dispenser's water outlet, press the water outlet button above the water outlet, wait for the water to flow out of the water outlet, take out the cup or kettle and turn off the button on the water dispenser's water dispenser. 5.

Shutdown: After taking the water, turn off the switch on the water outlet, fill the water dispenser with water, and wait for the water dispenser to automatically power off. 6.

Clean the water dispenser: Regularly clean all parts of the water dispenser, including the water purification bucket, water outlet, body and internal water storage tray, which can be cleaned with alcohol, soapy water, etc. The above is the basic use method of Meiling water dispenser, and at the same time pay attention to the quality and quality of drinking water to avoid poor water quality.

Hello, you can find a suitable place to place it first, plug in the power cord, add water, and turn on the switch.

I'm sorry I don't understand, but can you elaborate on that?

Hello, you can. The detailed operation is as follows: The following is how to use Meiling water dispenser:

1.Prepare the water dispenser: Place the water dispenser on level ground and plug it in, making sure the plug is tight and plugged in tightly to ensure a safe grounding.

2.Add water: Place the water bucket on the water dispenser, and open the lid of the bucket to pour clean drinking water into the bucket, making sure that the amount of water added does not exceed the capacity of the bucket.

Then close the lid of the water bucket and place it stable. 3.Power on:

Press the switch button on the water dispenser to start the water dispenser, and wait for the water dispenser to start successfully. 4.Start getting water:

Place the cup or kettle under the spout of the water dispenser, press the water outlet button above the water outlet, wait for the water to flow out of the water outlet, take out the cup or kettle and turn off the button on the water dispenser's water dispenser. 5.Shutdown:

After taking the water, turn off the switch on the virtual hail at the water outlet, fill the water dispenser with water, and wait for the water dispenser to automatically power off. 6.Cleaning the water dispenser:

Regularly clean all parts of the water dispenser, including the water bucket, water outlet, body, and internal water storage tray, and can be cleaned with alcohol, soapy water, etc. The above is the basic use method of Meiling water dispenser, and at the same time pay attention to the quality and quality of drinking water to avoid the situation that the water quality is not quiet.

Summary. Hello dear, <>

It may be that the continuous use time is too long, and the motor is overheated. There is a thermal protection switch on the stator of this motor, when the temperature is too high, it will be automatically disconnected, then the machine will not rotate, and the thermal protection switch will automatically reset after the motor cools, and the machine can be used again.

In such a situation, as long as you put the machine in a ventilated place and wait for about 20 minutes, it can be automatically restored, and be careful not to use too much force and not too long when using it next time.

If the problem cannot be solved according to the above methods, it may be a real fault, and the maintenance master should check the power switch, safety switch, thermal protection switch, motor and other components in detail.

Meiling juicer maintenance.

Hello dear, <>

It may be that the continuous use time is too long, and the motor is overheated. There is a thermal protection switch on the stator of this Yunfeng rental motor, which will be automatically disconnected when the temperature is too high, and the machine will not rotate at this time. In such a situation, as long as the bypass machine is placed in a ventilated place and waited for about 20 minutes, it can be automatically recovered, and the next time you use it, be careful not to use too much force, and not too long.

If the problem cannot be solved according to the above methods, it may be a real fault, and the maintenance master should check the power switch, safety switch, thermal protection switch, motor and other components in detail.

Hello dear, <>

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your wide concession and praise, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that I am still satisfied with my answer, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

Summary. Meiling juicer maintenance 400-811-1666 Meiling juicer maintenance.

Meiling juicer repair 400-811-1666

Founded in 1983, formerly known as Hefei No. 2 Light Industry Machinery Factory. In 1983, it switched to household refrigerators, and is one of the important electrical appliance manufacturers in China, with three major refrigerator (cabinet) manufacturing groups in Hefei, Mianyang and Jingdezhen, as well as refrigerators, freezers, washing machines and other product lines. The company's headquarters is located in Hefei, the company's leading product Meiling refrigerator is a national export inspection-free product stool or line.

What is the reason for not turning.

You only charge for nothing.

Reason why the juicer does not rotate 1. Improper installation: It may be because the juice collection tray in the kernel part of the juicer is not properly installed and is displaced. If the juice tray inside the juicer is not installed with a proper wheel, it will be detected by the automatic monitoring system of the juicer, resulting in the juicer automatically stopping the phenomenon, at this time, as long as the juice tray is reinstalled to the appropriate position, it can be 2

It is also possible that the juicer's push-pull rod is pushed too hard. During the juicer process, if the push-pull rod is pushed hard, it will cause the juicer to not function normally and stop rotating, so the pusher should be released and gently pressed. Or let the juicer sit for about twenty minutes before continuing to use it.

3. Abnormal power supply: It may also be caused by an abnormal power supply connected to the juicer. If the power supply voltage at home is unstable, it will cause the juicer to fail to operate normally and not rotate, so you can only suspend the use of the juicer and wait for the power supply to stabilize before using it.

If the voltage is stable, it may be caused by damage to the internal motor, and it is necessary to replace the motor with a new one.