My excavator worker and farmer brand is emitting a lot of black smoke

Do know the task:, thank you!!

No matter what kind of oil, as long as the anti-wear property is good;

After many cars that burn engine oil use super eutectic lubricating oil, they are pleasantly surprised to find that they no longer burn engine oil, because it is nano anti-wear repair engine oil; Directly approved by the manufacturer;

The wear resistance of the engine oil is not good, and it can be improved a lot by using the super eutectic lubricating oil with good wear resistance;

The general fuel additive is a bottle of 50 ml with 60 liters of gasoline, first fill up the fuel, and then pour it in;

However, I recommend you to use Chaomei brand fuel additives for Sinopec OEM;

The real way is to buy an engine internal cleaning agent produced by Chaomei, pour it into the oil cylinder, idle for ten minutes, and then replace it...

You use poor engine oil, which is not resistant to wear and tear, and soon burns the engine oil, tens of thousands of kilometers; With engine oil with good wear resistance, it is basically difficult to wear, and it will not burn engine oil for life;

Do you still believe in the original? The original one is the most basic qualified; Definitely not the best;

These oils are average, and no one is better than the other; You need to use a good anti-wear oil to protect the car;

Burning engine oil means that the engine oil is not anti-wear, and the wear particles are too large, resulting in poor sealing before burning engine oil;

Use super eutectic lubricating oil with good anti-wear performance to repair the slight burning of engine oil; And it's not expensive;

It is not normal to burn engine oil, either there is a problem with the assembly, or the engine oil is not wear-resistant;

The engine oil used is not good and does not play a role in anti-wear; Wear and carbon deposits are generated, resulting in louder noise;

Remove carbon deposits, enhance power, eliminate exhaust gases, save fuel and reduce fuel consumption.

Use super eutectic lubricating oil, close to zero wear, no oil burning;

My excavator, fashionable fashion is the most fashionable.

Explanation:

The excavator emits blue smoke, indicating that the oil enters the combustion chamber to participate in combustion, which is generally caused by the inability of various parts of the engine to mesh normally.

Fault classification: 1. The excavator emits blue smoke when the cold car starts in the morning.

2. After the excavator is started, it continues to emit blue smoke, and it is accompanied by the phenomenon of increasing fuel consumption and burning oil.

Excavator Blue Smoke Cause:

1. It is normal for the excavator to emit blue smoke when it starts in the morning, but there is no blue smoke after starting. Because the excavator is operating in winter due to the low ambient temperature, there may be blue smoke when it is started early. It can also be due to the downtime at night.

The oil seeps into the combustion chamber from the piston ring or valve seal, and the blue smoke phenomenon will only appear when it starts in the morning, and after the hot car has burned out, the hot car will have no blue smoke.

2. After the excavator is started, the blue smoke continues, and there is the phenomenon of burning engine oil, and the common fault reasons are as follows:

If the engine piston ring is worn or the valve seal is worn, the fault can be eliminated by replacing the piston ring or valve seal.

If the oil level in the oil pan is too high and too much oil is added, it will also cause blue smoke failure.

The air filter has been channeled into the combustion chamber through the air intake pipe, and the combustion is incomplete, and the excavator engine emits blue smoke.

The opening clearance of the engine piston ring is too large and too small.

Summary. Hello, there is black smoke, that is, there are the following reasons, when the first engine power is insufficient, when you increase the amount of fuel injection to the cylinder, it does not burn enough, so it emits black smoke.

This problem is a normal phenomenon, for example, when you dig in the soil, you dig up a rock, and the engine will emit a puff of black smoke.

Second, the engine maintenance is not enough, due to the excavator plus more diesel impurities, the fuel filter element service cycle becomes shorter, which will also cause the engine to emit black smoke, insufficient power, stuffy car and other situations.

The third is that the engine fuel injector is broken, and it cannot be atomized and sprayed into the cylinder, causing black smoke.

What's the deal with the black smoke when the excavator is working?

Hello, I have seen your question and am sorting out the answer, please wait a while

Hello, pro black smoke, that is, there are the following reasons, the first time the power of the world filial piety machine is insufficient, when you increase the amount of fuel injected into the cylinder, there is not enough combustion, so it emits black smoke. This problem is a normal phenomenon, for example, when you dig in the soil, you dig a rock, and the engine will emit a puff of black smoke. Second, the engine maintenance is not enough, due to the excavator plus more diesel impurities, the fuel filter element service cycle becomes shorter, which will also cause the engine to emit black smoke, insufficient power, stuffy car and other situations.

The third is that the engine fuel injector is broken, and it cannot be atomized and sprayed into the cylinder, resulting in black smoke from the letter burial.

Summary. Hello, there are several reasons why the small forklift emits black smoke hard: 1

The flammable mixture is too thick. 2.There is too much oil in the engine fuel.

3.Poor piston ring or crankshaft oil seal sealing. 4.

There is moisture in the fuel. 5.Bad spark plug 6

The air filter is too dirty.

Hello, there are several reasons why the small forklift emits black smoke hard: 1The flammable mixture is too thick.

2.There is too much oil in the engine fuel. 3.

Poor piston ring or crankshaft oil seal sealing. 4.There is moisture in the fuel.

5.Bad spark plug 6The air filter is too dirty.

The black smoke is because the fuel oil that is not completely burned is in the combustion chamber, and in the case of high temperature and lack of oxygen, the diesel fuel is not completely and fully combusted, so it decomposes and gathers to form soot.