The rearview mirror looks at the body wrong, how to turn back?

At a red light. When the car comes to a complete stop at a red light, you can use the left mirror (of course, you can also use the right mirror, but from a visual point of view, the left mirror is more comfortable) to observe the body and road conditions. Off street parking:

When the vehicle comes to a complete stop, look through the mirrors near the side of the road to see if the vehicle is parallel to the side of the road. Closed garage: After the vehicle is parked, due to the small space of the closed garage, both sides are basically walls, it is difficult to see the flat ** condition, at this time, it is necessary to observe both sides through the rearview mirror at the same time, and see the body clearly.

When reversing, pay attention to the rearview mirror and control the clutch. Use the naked eye to judge the distance between the body and the left and right sides, and make the width of both sides the same. Keep your eyes in the left and right mirrors until the width of both sides is the same, and quickly return to the steering wheel, then keep your body straight.

Continue to control the speed with the clutch and slowly return to the center.

The main content of the technical correction of the <> body is to turn the steering wheel in the opposite direction and then wait for the opportunity to return. Reversing into storage is a compulsory test for obtaining a small car driver's license after 2013.

Test the driver's ability to operate the car on the field. Reversing is a test point in the driver's test. That is, the action of the vehicle entering the garage from the right side.

Operational skills. The whole process is controlled by 1 or reverse idling, and the speed is driven at what speed is started.

In the process of controlling the steering time, you should observe carefully, grasp the key points of steering, and turn in time. In the test of controlling the driving route, the driving route of the car mainly depends on the speed and speed of turning the steering wheel. Learn to look in the rearview mirror and correct through the steering wheel, take two reversing into the garage as an example, generally if the body is not straight when we enter the warehouse, there will generally be a situation where the side is wide and narrow, at this time, we observe through the rearview mirror, in accordance with"Which side is wide and which side hits"The principle to adjust.

If it is in the forward direction, you will find that the body is leaning there, and you can hit the steering wheel in the opposite direction, and you can go back as much as you want.

The way the rearview mirror looks at the body. Because the direction mastered by novices is not good after all, 90-degree turns into the warehouse, and if you don't go back to half a circle, you must press it. Because from the warehouse on the right, look at the last window on the right, the coach did not teach, the last window to half, back to half a circle, to 10 centimeters to kill.

If you see it very late, it means that the car has not been put into the warehouse, and if you can't go back to half a circle like this, then you can go in.

You should first turn the steering wheel of the car to the left and then hang the car to D gear and move forward slowly, slowly adjust your direction in the process of moving forward, in the process of adjusting the direction, if you can't see the right tail of the vehicle from the rearview mirror, you need to turn back to the right, and then move forward slowly, and then move the steering wheel back and forth to adjust the position of the vehicle. Vehicles with a certificate of return.

Hit the steering wheel forward to straighten the wheels, and then reverse them back to straighten the body.

I think the best way to do this is to go back in the direction through the reference object in front of you, so that you can turn the body back in the right direction.

In the process of car storage, when you see that the body in one side of the rearview mirror has been parallel to the library sideline, then the rearview mirror has no value to look at again, you should immediately look at another rearview mirror, if you find that the body is not parallel to the library sideline, it means that your car into the garage is oblique, should be corrected immediately. How to control the distance from the sideline when swinging the car, you can look at the following picture OK.

You have a misconception. Rearview mirrors are used to observe the inside and back of the car. The left and right mirrors are to observe the left or right situation, usually driving and pulling over is to look at the reflector, how to know that the car is driving in their own lane and pulling over is not exactly the reference, no reference can no one can determine whether it is good or bad, which should be learned when reading.

Look at the size of the rear range of the car side depends on the arc of the reflector, the small range of the arc is less, and the line on the ground is slightly straight; The radius is large, and the line on the ground is slightly oblique. Car mirrors are all curved. Adjust the angle of the mirror according to your own habits (no matter which car), according to the coach to see the line on the ground, stop the car along the line and then compare the slope in the mirror to make a mark, and then see the slope in the mirror when reversing or sticking to the library, so the actual car has stopped straight.

Search: The car reflector looks in, the body is crooked, but in fact it is straight, what's going on, how to adjust the reflector, the height is relatively short.

Get in the driver's seat of the car, adjust your body position, and find a position that you feel most comfortable and easy to drive, and this sitting position must be able to easily step on the accelerator and brake. 2/4

The first adjustment is the left rearview mirror, the upper and lower positions of the left rearview mirror are adjusted to see half of the sky and the earth from the rearview mirror, and the left and right positions are adjusted to the body accounts for about a quarter of the left rearview mirror. 3/4

The left and right positions of the right rearview mirror are also occupied by the body in a quarter, the difference is that the right rearview mirror occupies two-thirds, and the sky only occupies one-third. 4/4

Because the driving position is on the left side of the car, the line of sight is somewhat biased, and only the rearview mirror adjusted to this state can see the car on the right.

The use of cars by families is still relatively extensive, which can not only ensure our normal travel on rainy days, but also bring a lot of convenience to our lives. But there are some minor problems encountered during driving, whether the driver can solve them. This requires drivers to know more about the solutions to common driving problems in their daily lives, so let's share how to solve the problem of rearview mirror body error today.

How to tell if the car is rightIf the driver wants to tell if the car is correct on the road, the most convenient way is to use the edge line on the road. Only when the reticle in the rearview mirror is parallel to the position of the body can the body be positive. In addition, if it is parked, you can observe whether the body is parallel to the parking line through the rearview mirror.

The most accurate way is to ask a companion to get out of the car to confirm whether the body is stopped, but if there is no companion, you still have to rely on your own professional skills to correct the body. <>

How to turn back the direction of the body is not rightFirst of all, the driver must learn to correct the body through the cooperation between the rearview mirror and the steering wheel. When reversing and entering the garage in the second subject of the driver's license test, the instructor will tell us to use the rearview mirror to observe, and adjust the body according to the principle of which side is wider and which side is wide. However, if the driver finds that the body will tilt to one side during normal driving, the driver needs to hit the steering wheel in the opposite direction and go back and forth to the front of the body.

If the amplitude of the deviation is too large, you need to go to a professional repair shop for inspection in time. <>

Precautions when driving: Wear appropriate shoes when driving, high heels, sandals, slippers, etc. are not suitable for driving, and sneakers are the best choice. Do not put pendants and other metal decorations on the car, dolls placed next to the rearview mirror will block the field of vision, and the metal hanging decorations on the rearview mirror will hurt the human body when braking suddenly. The most important point is that "don't drink while driving, don't drive when drinking", alcohol will paralyze people's brains, make the driver's mind trance, and it is very likely that accidents will occur.

Drive reasonably to ensure life safety.

If you see that the body is not right, you should look at the position of the rear of the car, if it is offset to the left, you should go to the left to hit the steering wheel, and then wait until the vehicle is stable before returning to the steering wheel, if the rear of the car is offset to the right, you should choose to shoot in the direction of the right, mainly to see the position of the rear of the car.

If you look very far away, hit to the right, if you look very close, go to the left, if you feel that the distance is particularly suitable, slowly turn the steering wheel back to the right, if you see the right side is far away from the car, you can go to the right, if you see the left side far away from the car, you can go to the left.

Reversing into the warehouse needs to return to the positive direction after the body and the side line is parallel to the positive, if the body and the side line are parallel before returning to the positive direction, then the back to the positive direction will be oblique, the specific reversing storage skills are as follows:

1. First hang the reverse gear, lightly lift the clutch and reverse;

2. Observe the left rearview mirror, and beat the steering wheel to the left when the left starting point sensing line slightly passes the left rearview mirror;

3. If the rear wheel of the car is about 30 cm away from the right corner, you do not need to correct the direction, and continue to reverse backwards;

4. If the angle between the wheel and the library is less than 30 cm, you can turn the steering wheel a little back to keep a distance of about 30 cm;

5. Pay attention to the rearview mirror, and quickly return to the steering wheel when the body is parallel to the edge of the library;

6. Observe the left rearview mirror, and stop when the lower edge of the rearview mirror coincides with the yellow line.

The old driver will say that it is your hand and eye movements that are inconsistent, because you have to return to the right when it seems to be uneven, so that after returning to the right, it will naturally be parallel. Adjust the timing according to how fast your movements reflect, and practice more.

Reversing into the warehouse needs to return to the positive direction after the body and the side line is parallel to the positive, if the car state before returning to the positive direction and the side line parallel, then back to the positive direction will be oblique, the specific reversing storage skills are as follows:

1. First hang the reverse gear, lightly lift the clutch and reverse;

2. Observe the left rearview mirror, and beat the steering wheel to the left when the left starting point sensing line slightly passes the left rearview mirror;

3. If the rear wheel of the car is about 30 cm away from the right corner of the library, there is no need to correct the direction of Fan Xiang Jujube, and the lead can be reversed backwards;

4. If the angle between the wheel and the library is less than 30 cm, you can turn the steering wheel a little back to keep a distance of about 30 cm;

5. Pay attention to the rearview mirror, and quickly return to the steering wheel when the body is parallel to the edge of the library;

6. Observe the left rearview mirror, and stop when the lower edge of the rearview mirror coincides with the yellow line.

How do you look at the body in the rearview mirror? How do you look at the body in the rearview mirror? How to look at the body in the rearview mirror:

1. When waiting for a red light: when you encounter a red light and the car stops completely, you can judge whether the body is parallel to the dividing line (yellow line and white line) on the road through the left rearview mirror (of course, you can also use the right one, but from a visual point of view, the left one is more comfortable to use); 2. Roadside parking: After the vehicle is completely stopped, observe whether the body is parallel to the roadside by observing the rearview mirror close to the roadside; 3. Closed garage:

After the vehicle is parked, because the closed garage space is relatively small, both sides are walls, it is difficult to see the flat ** condition, at this time we have to observe through the rearview mirror on both sides at the same time, to see whether the extension line on both sides of the body and the horizontal line of the door form less than or greater than the angle, one side of the angle is large, the other side of the angle must be small, the vision is very clear and easy to judge. @2019

How to use the rearview mirror to determine whether the body is correct or not? How to use the rearview mirror to determine whether the body is correct or not? How to use the rearview mirror to determine whether the body is correct or not:

1. Looking at the rear wheel mirrors on both sides has a vision problem, that is, it refers to the range that the mirror can reflect. In the industry, there is a reference to the three elements of vision, that is, the distance between the driver's eyes and the rearview mirror; The size of the mirror and the radius of curvature of the mirror. There is a certain relationship between these three elements, when the distance and size of the rearview mirror are the same, the smaller the radius of curvature of the mirror, the larger the field of view reflected by the mirror.

When the radius of curvature of the mirror is the same, the larger the size of the mirror, the larger the horizon reflected by the mirror. 2. At the same time, the rearview mirror also has a reflectivity index. The greater the reflectivity, the clearer the image reflected by the mirror. The magnitude of reflectivity is related to the reflective coating material on the inner surface of the mirror. 3. Due to the increase in the speed of general cars, wind resistance and noise are important issues for designers to consider, so the outline of the exterior rearview mirror should conform to aerodynamics, and the sleek lines should be used to minimize wind resistance and wind noise.