What kind of insulation material is AEPS insulation board?

AEPS insulation board is made in ordinaryPolystyreneThe granules are the main raw materials, and the polystyrene raw materials are preheated and foamed into the particles, and then mixed with organic fireproof materials and mixed with the film, and addedFoam boardThe equipment is heated for secondary foaming molding, and the product achieves A-level non-combustible effectThermal conductivityIt has the characteristics of low, fireproof, waterproof, light weight and high strength, and is a substitute for various insulation materials.

The construction process of AEPS insulation board is almost exactly the same as that of the traditional EPS board thin plastering external wall external insulation system.

Install the insulation board

1) The standard board size is 300*300, diagonal.

The error is less than 3mm, if you need to cut, you can use a small cutting saw to cut, and the allowable deviation of the size of the insulation board is 2.

2) Mesh cloth turning: door and window openings, deformation joints.

Paste mesh cloth on both sides, the total width is about 200, and the width of the bag part is 80, the specific method is as follows: the cutting length of the mesh cloth is 180 plus the thickness of the plate. First, apply a special adhesive with a length of 80 and a width of 2 on the bag turning area, then press into an 80-length mesh cloth, and throw out the rest for later use.

3) The configured special binder is smeared on the back of the composite foamed cement board, and the thickness of the binder compaction is about 3, in order to ensure that the bonding is firm, it is best to use the full dipping method, and the strip sticking method and the strip sticking method can also be used.

4) Strip bonding method: use a tooth trowel to evenly wipe the special binder on the foamed cement board horizontally, with a strip width of 10, a thickness of 10, and a middle distance of 50.

5) Strip method: use a trowel to wipe a special binder around and in the middle of each board, and then wipe a gray cake with a diameter of 50 and a thickness of 10 in the separation area of the foamed cement board.

6) Quickly paste the insulation board with a special adhesive on the wall to prevent the surface from crusting and losing the bonding effect.

7) After the foamed cement insulation board is glued to the wall, it should be flattened by a ruler of 2 meters to ensure its flatness and paste firmly, and the board should be squeezed tightly between the boards, and there should be no seams. After each board is glued, the special binder on the extruded surface should be removed.

8) The foamed cement board should be pasted in sections from bottom to top along the horizontal direction, and each row of boards should be staggered 1 2 board lengths, and the minimum local staggered seam should not be less than 100.

AEPS insulation board is a commonly used insulation material, polystyrene particles are used as the main material in the production, after being preheated and foamed into particles, it is stirred together with fireproof materials, and finally poured into the machine for heating for secondary foaming, which has the advantages of low thermal conductivity, thermal insulation, fire prevention and waterproofing.

In the exterior wall decoration, we need to use the material of insulation board, there are many types of insulation board, and different types of insulation board and characteristics are different. With insulation panels, exterior walls and roofs can be well insulated, making them more comfortable to live in. What is AEPS Insulation Board?

AEPS insulation board is a commonly used insulation material, in the production of polystyrene particles as the main material, through preheating foaming into particles, it is stirred together with fireproof materials, and finally poured into the machine to heat the car for secondary foaming, it has the advantages of low thermal conductivity, thermal insulation, fire prevention and waterproofing.

What is the function of the insulation board.

1. Installing insulation boards on the exterior wall or roof can effectively collect the excess heat outside the building, and release the heat smoothly at the right time. With the insulation board, the change of the heat gradient of the house will also be reduced, which can reduce the heat loss, so that in winter, it can play a role in temperature balance.

2. When the old building is renovated or the new building is constructed, the installation of insulation board can play a certain role in protecting the wall and roof, and can prevent the wall from cracking, mold, warping, peeling and other problems, and the insulation board can also resist the erosion of the wall by wind and rain.

3. The insulation board has good adhesion, which can effectively repair the problems of warping, deformation, and ribs after splicing.

4. Since most of the raw materials used in the production of thermal insulation boards are drifting beads, the thermal insulation boards can basically be used as the carrier of phase change materials, which can ensure that phase change materials can be used for a long time and have strong practicability.

When you buy insulation boards, you should not only consider its characteristics, but also fully understand its waterproof and fireproof properties to ensure that they have good performance. The above introduction to what AEPS insulation board is here, I hope to give you some reference, more related content, please pay attention to Qijia information.

In the construction and decoration of modern buildings, energy-saving engineering and thermal insulation engineering are very important modules, the building must do a good job of thermal insulation and collapse measures in order to achieve energy-saving effects, usually external walls, wheel-defeated doors and windows, top surfaces and other positions need to do thermal insulation measures, generally choose XPS thermal insulation board, polyurethane thermal insulation board, AEPS thermal insulation board and other materials, among which AEPS thermal insulation board is now a more popular thermal insulation material in the building, so what kind of board is AEPS thermal insulation board? Let's take a look with Qeeka Home experts.

1. What kind of board is AEPS insulation board?

AEPS insulation board is a foam insulation board made of ordinary polystyrene granular materials after preheating and foaming, mixed with organic fireproof materials for stirring and laminating, and finally heated for secondary foaming.

Second, what are the common insulation board materials?

1. Extruded insulation board.

Extruded plastic insulation board is XPS insulation board, its surface layer is dense, there is an inner layer of closed-cell structure, low thermal conductivity, good thermal insulation performance, suitable for building exterior wall insulation, and has good moisture resistance, so it can be used in humid environments, such as basements, cold storage, etc., XPS insulation board because of its own high strength, the board is relatively brittle, so it is not easy to bend, if you do not pay attention to the use, it is easy to damage and crack.

2. Polyurethane insulation board.

Polyurethane insulation board has efficient thermal insulation effect, thermal insulation performance is also good, better than mineral wool, glass fiber, polystyrene and other materials, and has special closed cell, can be insulated for a long time, its thermal insulation performance can last for 20-50 years, and the quality is stable, high production efficiency, good weather resistance, easy to install, fast construction.

Summary: The above is the introduction of what kind of board AEPS insulation board is, I hope the content shared can give you some reference, if you want to know more about relevant knowledge, you can **** Qijia Home to consult.

AEPS polymerized polystyrene board insulation board is an insulation board produced by improving on the basis of traditional EPS board. Ordinary polystyrene particles are used as the main raw material, and after preheating the foamed particles, they are mixed with inorganic fireproof materials and stirred to coat the film, so that the polystyrene particles are wrapped around the fireproof crystals, which completely changes the defects of the original polystyrene board shrinkage and molten droplets when exposed to fire. AEPS polymeric polystyrene board has the characteristics of A2 grade, which has the characteristics of low thermal conductivity, fire resistance, waterproof, light weight and high strength.

AEPS polymerized polystyrene board insulation board features.

1. Flame retardant and fireproof.

AEPS polymerized polystyrene board is made by mixing polystyrene particles and flame retardant slurry evenly and molding and polymerizing. It has completely changed the defect scatter code of the original polystyrene board shrinkage and molten droplets when exposed to fire, and the fire rating is A2. AEPS polymeric polystyrene board is coated with fireproof inorganic slurry material on its side, top surface and bottom surface respectively, which has strong flame retardancy and fire rating A2 level.

For other boards, the fire rating of phenolic board is only B1, and the fire rating of rigid foam polyurethane board is only B2.

2. Keep warm. After the AEPS polymerized polystyrene board is reprocessed, the thermal conductivity increases slightly, but it is still within it, and the long-term use will not affect the thermal insulation effect, which is conducive to the safety of the external wall insulation system.

3. High strength.

AEPS polymerized polystyrene board has stronger toughness, hardness and strength than ordinary polystyrene board, which is more conducive to the connection safety of external wall insulation system, and is an alternative product of various current insulation materials.

4. Easy to construct.

The construction process of AEPS polymeric polystyrene board insulation board is almost identical to the construction process of the traditional EPS board thin plastering external wall insulation system, which has good workability, simple operation, low loss, and no other new materials are difficult to employ.

How to choose insulation.

1. Compressive strength and flexural strength.

No matter what kind of insulation material is used, it is necessary to look at the compressive strength of the material to prevent damage during use. Be sure to choose a material with high compressive strength, when buying, you can use hand to fold the surface of the plate, if the plate is easy to bend, it means that the plate is not strong enough to resist coarseness.

2. Water absorption.

The water absorption rate of the insulation material is also very important, and it has a great impact on the insulation material, generally speaking, the lower the water absorption, the better. In this way, the plate will not absorb moisture in the air, and the thermal conductivity will be affected by not burying the rock, thereby increasing the thermal insulation performance of the plate.

3. Fire performance.

The fire resistance of the insulation material is very important, if the material is easy to burn, it is very harmful to the decoration. When buying insulation materials, it is necessary to carefully compare the fire resistance, and also see whether the materials will produce harmful gases when burning, so as not to endanger people's health.

4. Sound absorption coefficient.

The insulation material must choose a good sound-absorbing effect, otherwise the indoor sound insulation effect will not be achieved during the decoration. Therefore, when purchasing, it is necessary to choose a relatively high sound absorption coefficient, so as to reduce indoor noise when using.

What are the characteristics of AEPS exterior wall insulation board?

We've all seen insulation boards. The most common function of a heat shield is to prevent heat from spreading. In terms of use, we can see that some buildings, houses or incubators will use insulation boards in these areas.

It can be said that the role of insulation board should not be underestimated. EPS insulation board is a kind of insulation board, and its advantages and characteristics are exactly what we need in our application. So what are the characteristics of EPS insulation board?

Good thermal insulation and energy saving effect. For Class A fireproof EPS insulation board, it continues the advantages of small thermal conductivity and large heat storage coefficient of traditional EPS foam board, and the insulation effect is better than that of inorganic active insulation mortar and foam glass on the market.

EPS insulation board is a safe and fireproof Class A flame retardant material. Class A fireproof EPS insulation board overcomes the flammability defects of traditional EPS foam board and has very high safety performance. It fully meets the Class A fire protection standard for insulation materials stipulated in the Gongtong Zi [2009] No. 46 document jointly issued by the Ministry of Public Security and the Ministry of Housing and Urban-Rural Development.

Class A fireproof EPS insulation board has higher strength than rock wool and phenolic board, and is convenient for construction.

Class A fireproof EPS insulation board is a closed foamed spherical molecular structure, which is relatively light in weight, good in dimensional stability and non-toxic. After 80 times of high-temperature water spraying cycles and 30 times of heating and freezing cycles, the system has no blistering, hollowing, falling off of the finishing layer, and no water seepage cracks. Impact-resistant tiles and impact-resistant coatings reach 10J with superior performance.

For Class A fireproof EPS insulation board, its construction technology is the same as the corresponding construction technology of China's traditional EPS board thin plastering external wall insulation system, which can be said to be very mature in construction technology. In addition, the structure of this product is very simple, it can be safe and reliable, and there will be no defects such as the instability of the new material system.

In the case of Class A fireproof EPS insulation boards, it also retains the thermal conductivity corresponding to very traditional EPS foam boards. The corresponding low thermal insulation effect is excellent, and the corresponding process is also very mature. The corresponding process cost is very low, and the corresponding ** is also much lower than the same class A flame retardant related insulation materials in the relevant market, and can also achieve the effect of class A flame retardant, which can be said to be very cost-effective and has broad market prospects.

AEPS exterior wall insulation board not only has good heat dissipation, but also can resist the cold outside, which can play a good role in thermal insulation, and can also play a certain role in shockproofing.

The specific characteristics are very light and thin, and special convenience, the thermal insulation effect is particularly good, the heat insulation effect is also very good, the flame retardant effect is also very good, the thermal conductivity is small, the heat storage coefficient is high, the combustion resistance and safety are very high, the construction is convenient and simple, the safety is also very high, very cheap.

This thing has the effect of heat preservation, and it also has the effect of heat insulation, which can also save energy, and the effect of fire and waterproof, which can isolate some noise, can prevent vibration, and can also save costs when installing.

It can save energy and reduce consumption, and at the same time can also reduce costs, and it can also be shockproof, and it will also have the effect of heat preservation, and the durability is relatively long-lasting.

1. Flame retardant is better: it overcomes the flammable shortcomings of traditional EPS foam board, and in the production process, the flame retardant material becomes an isolation bin by high-pressure cyclone stirring, extrusion, and low-temperature foaming, which prevents the spread of ignition, ignition, and spread, and provides a safety guarantee in the case of engineering.

2. Thermal insulation: It continues the advantages of low thermal conductivity of traditional thermal insulation materials, and has better thermal insulation effect than common phenolic boards and foam boards on the market. Make the building more energy-efficient and the house more comfortable to live in.

3. Superior performance: closed spherical molecular structure, good dimensional stability, after repeated high temperature-water spraying cycle and several heating-freezing cycles, there is no water seepage cracks, no bubbles, hollowing and falling off of the finishing layer.