-
Anonymous users2024-02-11What should I do if the TV shows no signal after it is turned on.
-
Anonymous users2024-02-10How to adjust the TV without signal, what to do if the TV has no signal.
-
Anonymous users2024-02-091. This situation may be due to the loosening of the connection cable between the set-top box and the TV or the poor contact, which will cause the TV to have no signal. 2. There is also a situation where the signal output line is damaged and causes failure. 3. The signal source of the TV is switched to other modes, resulting in no signal on the TV.
4. In addition, there is a failure of the set-top box, which will also cause the TV to have no signal. 5. There is no money on the set-top box card, and the fee is not paid in time, and there will also be a problem of no signal on the TV Suggested solution:
1、You need to check whether the connection cable between the set-top box and the TV is loose,If it is loose, it needs to be reconnected,After the connection, it can be restored to normal。 X000B 2. Check whether the signal output line is damaged, and you need to replace a new signal output line to solve the problem of no signal. 3. Check whether there is a problem with the set-top box, if the set-top box is faulty, you need to find a professional maintenance personnel to repair it, or replace it with a new set-top box.
4. In addition, look at whether the signal source is correct, if the signal source is incorrect, then the correct signal source needs to be replaced. 5. You can call the operator's ** to inquire whether there is no money, and you can resume normal use after paying the money.
-
Anonymous users2024-02-08There may be a number of reasons why the TV has no signal and is not late:
1.Source issues: If you're using cable TV, it may be because there's a problem with your TV source, such as a faulty TV line or a TV source that's cut off.
2.Signal reception issues: If you're using a wireless TV, it may be because there's a problem with your TV receiver, such as an incorrect antenna position or a damaged antenna.
3.Signal conversion issues: If you're using a digital TV, it may be because of a problem with your digital signal converter, such as a faulty converter or an incorrect converter connection.
4.TV setup issues: If your TV is set up incorrectly, it can cause no-signal issues, such as incorrect source selection or incorrect source settings.
Workaround:1Check the signal source: Check whether the TV line is connected normally, and check whether the TV signal source is cut off.
2.Check the receiver: Check if the antenna position is correct, check if the antenna is damaged.
3.Check the converter: Check if the digital signal converter is working properly, and check if the converter is connected correctly.
4.Check TV settings: Check whether the TV signal source is selected correctly, and check whether the signal source settings are correct.
-
Anonymous users2024-02-07The TV has no signal, which may be due to the fault of the router, or it may be that the TV parts are not in good contact.
Solution: 1: Please confirm whether the broadband Internet access is normal, if you can't access the Internet, please follow the broadband fault handling processIf the Internet access is normal, go to Step 2.
2: Restart the modem and set-top box, and if the fault persists, go to step 3.
Three: Check whether the network cable between the modem and the set-top box is normal, you can check whether the lights connected to the interface of the set-top box and the modem are green (normal when the green light is on), if the red light is on, try to plug in the network cable or replace other ports on the modem, if possible, replace a good network cable, and restart the set-top box to see if the fault disappears. If the fault persists, go to Step 4.
4. Please check the network connection mode of broadband and ITV, if you use a router or modem or switch with routing function, please remove the router first, disconnect the computer, connect a single set-top box directly to the modem, and restart the set-top box to see if the fault still exists. If the fault persists, please call Telecom customer service**10000+4+1 for consultation.
-
Anonymous users2024-02-06Summary. Hello,The reasons are as follows、Signal source problem,Check whether the connection cable of the TV set-top box or other equipment is loose,If it is loose or wrong position,The TV has no signal or can not open the TV program normally。 2. TV hardware problems, if the plug-in board interface of the TV is damaged, or the TV signal receiver appears or, or other hardware damage may cause the TV to have no signal, if it is a TV hardware problem, you need to go to the TV manufacturer for after-sales maintenance.
3、Smart TV needs to be connected to the network to use,Therefore, when the TV shows no signal, you can check whether there is a problem with the wireless network of the TV,Generally find the settings from the TV home page、Network settings,Reconnect the wireless network to see if it can return to normal。 If your TV is connected to a network set-top box, you need to go to the page of the set-top box to reset it, or go to the home page to find the settings and then find the wireless network, and try to reconnect the network.
What's going on with a TV with no signal?
Dear, hello, please wait, we have seen your question, and we are quickly sorting out the information for you, and we will send your answer to the little master immediately. Thank you for your support, recognize my service, and remember to give a thumbs up<>
Hello,The reasons are as follows、Signal source problem,Check whether the connection cable of the TV set-top box or other equipment is loose,If it is loose or wrong position,The TV has no signal or can not open the TV program normally。 2. TV hardware problems, if the plug-in board interface of the TV is damaged, or the TV signal receiver appears or, or other hardware damage may cause the TV to have no signal, if it is a TV hardware problem, you need to go to the TV manufacturer for after-sales maintenance. 3、Smart TV needs to be connected to the network to use,Therefore, when the TV shows no signal, you can check whether there is a problem with the wireless network of the TV,Generally find the settings from the TV home page、Network settings,Reconnect the wireless network to see if it can return to normal。
If your TV is connected to a network set-top box, you need to go to the page of the set-top box to reset it, or go to the home page to find the settings and then find the wireless network, and try to reconnect the network.
There is no signal in the satellite TV receiver, and in the case of confirming that the connection line and high-frequency head are normal, you need to adjust it according to the following steps: >>>More
1. The data connection line between the monitor and the host is not in good contact. 2. The graphics card on the motherboard is not in good contact. 3. The graphics card on the motherboard is broken. >>>More
Unplug the memory module, wipe it and try to change it.
First, environmental problems, such as buildings in the city are relatively high, if you live in a lower position, there will be no signal, such as the same in rural areas, what to do, how to solve similar problems, this is to find mobile or Unicom to install a signal receiver to strengthen the signal, second, whether there is a signal jammer around you, the mobile phone receives the signal through the propagation of electromagnetic waves, if there is interference with electromagnetic wave equipment just turn off. >>>More
The TV picture can't be occupied, and suddenly there is no signal, and there is a picture according to the signal source, and suddenly there is no signal.