My new house has just been renovated, and the sewer pipe is blocked, who is responsible?

As long as the sewer pipe of the new house is not blocked when the house is inspected, it can only be considered that the water pipe is blocked after the renovation is started. In such a situation, there is no reason and basis to find the property company or the developer responsible. can only be done by a renovation company.

Responsible for dredging. Fortunately, it is not complicated to unclog the sewer pipes, and the cost is not high, at most seventy or eighty yuan can be done.

Of course, if the sewer is already blocked by the time the workers move in, then the property company or developer can be responsible. For the workers, this piece. It should also be reminded that when decorating, pay attention to the protection of the sewer outlet, and do not throw garbage and the like into the sewer casually, which will lead to the blockage of the sewer pipe.

[Legal Analysis].

The sewer pipe supervisor (that is, the public sewer pipe) is blocked, and the property is responsible, and the owner is responsible for the blockage of the household pipe.

Public sewer pipes are public facilities and are blocked and are dredged by the property. If it is damaged, the responsible person is responsible for repairing, and if there is no responsible person, the property management company will repair it with public maintenance funds.

[Legal basis].

Property Management Regulations》 Article 53 The owners of residential properties, non-residential properties in residential quarters or non-residential properties connected to the structure of a single residential building shall pay special maintenance funds in accordance with the relevant provisions of the State.

The special maintenance funds belong to the owner, and are specially used for the maintenance, renewal and transformation of the common parts of the property and the common facilities and equipment after the expiration of the property warranty period, and shall not be diverted for other purposes.

Measures for the collection, use and management of special maintenance funds shall be formulated by the construction administrative department in conjunction with the financial department.

Summary. 1. Decoration sewer blockage is generally caused by cement blocks, tile fragments, sediment, paint, woven bags, etc. If it is a soft object such as a woven bag, you can use a dredge machine to dredge it directly.

2. If it is blocked by hard objects such as cement slag, if it can still be seen with the naked eye, you can use hooks to take out foreign objects or vacuum cleaners to try, if you can't see it, you can use a household vacuum cleaner to try, sometimes there will be unexpected effects. If it doesn't work, then you have to use a professional dredging tool, which is best solved by a professional pipe dredging company. 3. In many cases of sewer blockage caused by carelessness during decoration, protective measures must be taken before decoration.

<>1. The blockage of the decoration sewer is generally caused by cement blocks, tile fragments, sediment, smear materials, woven bags, etc. If it is a soft object such as a woven bag, you can use a dredge machine to dredge it directly. 2. If it is blocked by hard objects such as cement slag with grinders, if it can still be seen by the naked eye, you can use hooks to take out foreign objects or vacuum cleaners to try, if you see that the wild height is gone, you can use a household vacuum cleaner to try, sometimes there will be unexpected effects.

If it doesn't work, then you have to use a professional dredging tool, which is best solved by a professional pipe dredging company. 3. In many cases of sewer blockage caused by carelessness during decoration, protective measures must be taken before decoration.

1. The use of tap water flushing is not serious for the blockage of the slag channel in Xiahengling, we can use the method of tap water flushing, although some water sources are wasted, but the method is relatively simple, and it is also more practical. So how do you do it? First of all, we need to choose a section of plastic pipe, the length is from the tap water to the sewer, and the diameter can be sleeved on the water pipe.

Then put the water pipe on the tap water, and put the other end on the mouth of the lower water backpipe, and put the water pipe to the maximum extent, so that the water pressure can be used to open the blocked sewer.

2. The blower is relatively short for the sewer, after the blockage, we can use the blower, which can also play the role of dredging the sewer, the specific method is as follows: we can prepare a blower, this blower, in the past, can be used to cook on the spring filial piety, that is, the use of the wind of the blower, can help the fire more vigorous. Then aim the mouth of the blower at the sewer, turn it on to the maximum horsepower, and then blow the air inside, which can also play the role of dredging the sewer.

Use a blast or calendar machine to dredge the sewer, mostly for lighter, larger things. After all such things are plugged into the sewer, it cannot be washed out by relying on the method of water flow alone, so this method can be used in the draft.

Repair and replacement should be carried out immediatelyIf this is the case, don't be lazy, to repair in time, don't leave the problem in the future, because after a long time of use, there may be more problems, at that time it may be more troublesome to repair, so now find that the problem in time to repair may have some losses and some damage to the overall decoration, but for the sake of future life, bring more unnecessary trouble, or immediately decorate? You can't stay for a moment.

Look carefully to see if there are any other problemsWhen carrying out repairs, it is also necessary to look at other parts to see if there are other damages and failures? It is possible to carry out a comprehensive inspection and maintenance as much as possible so as to avoid similar incidents from happening again, so it is still necessary to observe and consider more when repairing.

Sewer pipes and leak-proof layers, must be done, if there is a problem, such as it is difficult to continue maintenance, and the time and cost of maintenance are particularly much, so these places must be added enough, and be careful, so as to avoid more serious problems.

Remedial action must be taken, and if it doesn't work, it can only be reworked.

Wash with water, the water flow should generally be as large as possible, and the time should be as long as possible. If it is an iron pipe, you can also vibrate or knock on the iron pipe and flush it with water. If that doesn't work, you can cut down the section that is clogged with cement and replace it.

With 35 hydrochloric acid, and a small amount of flour, it can act as a corrosion inhibitor and promote the cleaning of sand cement. The pipeline dredging machine breaks the cement, and the general high-power pipeline dredging machine can hit a mortar block of about five centimeters. However, it should be noted that this method is not suitable for floor sewers, PVC pipes, old cast iron pipes, and easy to puncture the pipes.

Generally, the blockage is at the elbow of the water trap of the sewer pipe, which can be dredged with a high-power pipe dredging machine first, if the cement has not been solidified for a long time, it should be able to be opened. If it is at the elbow, you can unscrew the sewage screw under the elbow, and manually break the cement block with a chisel or a percussion drill, which should be dredged.

1. Slight blockage of the toilet: Generally, the toilet blockage is caused by toilet paper or sanitary napkins, towel rags, etc., which can be dredged directly by using a pipe dredging machine or simple dredging tools.

2. Toilet hard object blockage: accidentally fall into plastic brushes, bottle caps, soap, combs and other hard objects when using. This kind of blockage is mild, you can directly use a pipe dredging machine or a simple dredging device to dredge directly, and when it is serious, you must disassemble the toilet to dredge, and this situation can only be completely solved by getting things out.

3. Aging and blockage of the toilet: The toilet has been used for a long time, it is inevitable that it will scale on the inner wall, and in serious cases, it will block the vent of the toilet and cause the toilet to drain slowly.

4. Toilet installation errors: generally divided into: the outlet at the bottom is not aligned with the drain outlet, the screw hole at the bottom of the toilet is completely sealed, which will cause the toilet drain to be unsmooth, and the water level of the toilet tank is not high enough to affect the flushing effect.

5. Squatting pit to toilet: some old houses are installed when building a squatting pit, and the bottom of the sewer pipe is a U-shaped waterproof elbow, when recreating the toilet, it is best to replace the bottom elbow with a direct bend, if it can't be replaced, then before installing the toilet, it is necessary to do a good job of cleaning up the bottom anti-water bend, and do not let cement or tile fragments fall into it during installation.

Decomposition using acidic liquids such as cement dissolvers Most of the cement components are silicate, so they can be decomposed using acidic solvents. The composition of cement dissolving agent is strong acid in solid and strong acid in liquid. 2.

Pull out the cement by hand or tool Generally, there will be a bend before the drainage pipe enters the sewer at home, and it is very easy for hard objects to get stuck in the bend, you can try to hammer the iron broom handle into a soup spoon shape. 3.Professional dredging company to deal with cement is different from other sundries, relatively hard, in the case of their own can not dredge, in order to avoid pipeline damage, you can choose to ask a professional dredging company to deal with it.

How did your family get through in the end? This is also the case in my house now, every time I do laundry, I have a balcony of water.

Hello! If the professional dredge can't dredge, you can only change the pipe.

You can go and find the property! Or you can just go for it.

Summary. The issue of responsibility for the blockage of the sewer in the new house needs to be determined on a case-by-case basis. If the sewer blockage is caused by the developer's failure to follow the specifications or the use of low-quality materials during the construction of the house, then the developer should be liable; If the owner accidentally damages the sewer pipe during the renovation process, resulting in a blockage, then the owner should be liable; If the upstairs occupant pours debris into the sewer during use and causes a blockage, then the upstairs occupant should be liable; If the public sewer is blocked due to aging pipes, blockage, etc., then the property management company should be held liable.

The issue of responsibility for the blockage of the sewer in the new house needs to be determined on a case-by-case basis. If the sewer blockage is caused by the developer's failure to follow the specifications during the construction of the house or the use of low-quality materials by Chi Xiao, then the developer should be liable; If the owner accidentally damages the sewer pipe during the renovation process, resulting in a blockage, then the owner should be liable; If the upstairs occupant pours debris into the sewer during use and causes a blockage, then the upstairs occupant should be liable; If the sewer is blocked due to aging and clogged pipes, then the property management company should be held responsible.

Whose responsibility is it that the sewer of the new house is blocked before the renovation.

The developer is obliged to deal with.