How to choose a squatting urinal? How to use a squatting toilet

1. How to choose a squatting toilet.

1. Look at the brand.

You can't go wrong with choosing a big brand, the quality of the product will be more guaranteed, and you can rest assured that you can use it.

2. Touch the surface.

If you touch the surface of it with your hands, if it is delicate and not grainy, then you can buy it with confidence.

3. Weigh the portions.

If there is a heavy feeling in the hand, it means that the quality of its ceramics is very good, and it is also completely porcelainized.

4. Water absorption.

The water absorption rate should not be exceeded, so it will be more convenient to clean, and it is not easy to smell, so there is no need to worry about cracking the surface.

5. Test flushing.

You can flush the water to see how the effect is, the impulse is not large, and the general amount can not exceed the specified value.

In the process of our renovation, we all know that many parents like to put steamed buns in the bathroom, because they think it is more convenient and comfortable to go to the toilet. But for the younger generation, they will choose to squat more when decorating, why is this?

We have always known that the area of the bathroom is relatively small, and putting a toilet in the bathroom will occupy too much space and make the space more crowded. At the same time, the toilet is more troublesome to clean, and you need to pay attention to hygiene when using it. Therefore, the younger generation will choose to squat, squatting is relatively not particularly occupied, we can put a lid on it, and then stand on it for other operations such as bathing.

Squatting is also easier to clean, there is no hidden danger of disease hereditary, and for young people, squatting is a better choice. And in terms of **, squatting is also cheaper than the toilet.

When it comes to decoration, many people will think about how much budget is for decoration? How much will it cost to renovate at the end? Everyone will have different tips when it comes to decorating, not just the toilet, and perhaps more options in other areas.

Decoration is not only to reasonably change the space, but also to pay attention to the use and functionality of the house on the original basis, and finally pay attention to cost performance. It should not only be comfortable to live in, but also beautiful and warm.

Squatting toilets are no strangers to everyone, many people have them at home, the use method is very simple, people can squat on it to defecate, more hygienic and convenient.

In order to give you a deeper understanding of squatting toilets, here are several common squatting toilets, I hope they are useful.

1. Split squatting toilet: it does not have a water trap, and it is separated from the trap, which is called a split squatting toilet, which is easy to install, has a large water flow and sufficient momentum.

2. Siamese squatting toilet: It comes with a water trap, which can use the bend of the water trap to create a "water seal" to prevent the odor of the sewer from flowing backwards.

3. Squatting toilet without front water retainer: the shape is simple and elegant, and the application is universal.

4. Squatting toilet with front water retainer: It can keep the ground near the squatting toilet clean and hygienic.

Flush toilet principle.

Toilet buying tips.

Toilet leakage problem solution.

Toto toilet ** recommended.

Before installing the squatting toilet, we must first prepare the tools to use, such as raw meal tape, glass glue, oil sludge, tape measure and level, etc.

Here are the steps to install the squatting toilet:

According to the sewage outlet of the installed product, reserve the sewer pipe at the appropriate position from the wall, and determine the distance between the sewer pipe inlet and the ground level.

The depth of the pit reserved for the installation of the squatting toilet under the ground is greater than the height of the toilet.

Place the connecting rubber plug into the water inlet hole of the squatting toilet and clamp tightly. Apply a layer of glass glue or putty to the outer edge of the water inlet hole of the squatting toilet, and insert the water inlet pipe into the water inlet hole of the rubber plug so that it is well sealed with the rubber plug to prevent water leakage.

Apply a layer of glass glue or putty to the edge of the outlet of the squatting toilet, put it into the inlet of the sewer pipe and screw it together, and set the toilet level with coke residue or other filling.

Open the water inlet system and check each joint for water leakage, and if there is a water leak, check the condition of each joint. until the problem is resolved.

After checking that there is no water leakage at each joint, fill the area around the toilet with filler, and fill in the contact surface between the ceramic and the cement mortar.

Elastic materials such as asphalt or linoleum over 1 cm.

Use cement mortar to fix the squatting toilet in the horizontal plane, and after it is stable and firm, then pave the bathroom floor tiles on the cement surface.

Test flushing, if there is no abnormality, you can use it.

Finally, precautions for installing a squatting toilet:

All parts of the squatting toilet that come into contact with concrete should be filled with elastic materials such as asphalt or linoleum, otherwise the toilet will break due to cement expansion.

When finishing with heat-dissolved asphalt, it is necessary to prevent the toilet from bursting due to heat.

The installation of the toilet should be operated in strict accordance with the instructions, otherwise the toilet will be broken.

The squatting toilet inlet flushing device mainly includes ball valve, high tank flushing, electromagnetic induction flushing valve, delay flushing valve, manual flushing valve, etc.

Squatting toilets can not only be used at home, but also widely used in public places. How to choose a squatting toilet, has also become a topic of concern for us. Here's how to choose and why.

1. The water trap is whether there is a water seal at the drain hole of the squatting toilet, which can avoid the return of odor and play a role in suppressing odor. If there is no design trap, the drain hole of this squatting toilet is straight-through, and the odor will definitely flow back under the action of the water flow, and the odor prevention effect is very poor. Therefore, in order to keep the bathroom fresh air and no smell lingering, you must choose a squatting toilet structure with a water trap.

It is proposed to procure and install a squatting toilet with a trap. This avoids the need to install traps on the ground. If another trap is installed from the new, the height of the trap needs to be 30cm, the height of the squatting pit is 25cm, and the height of the pit will not be less than 50cm.

In this way, the squatting pit needs to be made with two steps, which seriously occupies the space of the bathroom. Install a squatting pit with a water trap, you can just walk up a step without extra steps.

2. There are two designs of squatting toilets with and without water tanks, and the usage rate of these two is almost the same. The purpose of the water tank is to provide a certain amount of water and water pressure to clean the squatting toilet, and the flushing effect is more discreet. Especially for residents with higher floors, it is better to use a squatting toilet with a water tank to flush the water because the water pressure is not enough.

There are two ways to dissulate the water tank: hand pressure type and induction type, and the installation of a squatting toilet with a water tank is more fashionable and classy.

3. To install a stainless steel squatting toilet, you must understand the diameter of the inlet pipe of the self-combusted water, in principle, the diameter of mm is not satisfactory to the direct flushing requirements of the stainless steel squatting toilet, and a high water tank or low water tank must be installed, so as to satisfy the water pressure and water volume of the flushing. In order to facilitate maintenance and recuperation, the family proposed to use a low water tank.

4. When buying a squatting toilet, you should consider whether to groove on the wall. It is recommended not to slot, and all kinds of pipes and lines should be on the ground as much as possible.

There are two reasons for this:

First, you can go to inspect the situation after the decoration, where the wall is slotted through the pipe, the line of the location, half a year, there will definitely be cracking, (of course, the painter does a better job may be longer).

2. If the water pipe is taken from the ceiling (ceiling), the water pipe will condense in the summer, which will definitely cause bad edification to the decoration and other furniture below.

5. The flush valve belongs to the flushing setting of the squatting toilet without a water tank, and is divided into water pressure type and foot pedal type. Foot pedal is generally used in public places, and hand pressure is mostly used in households. The water volume and pressure of the flush valve are slightly inferior to that of the water tank, but they take up less space.

For home users with smaller bathrooms, flush valves are more practical than water tanks.

When purchasing a flush valve, you should pay attention to the material of the valve core, and be sure to choose a ceramic disc valve core. In addition, pay attention to the way it is installed, try not to groove in the wall, and it is better to install pipes and wiring from the ground. The first can avoid destroying the beauty of the wall, and the second is also to avoid the follow-up maintenance work is not good.

In terms of bathroom selection, due to people's different preferences and requirements, some people prefer to squat compared to sitting on the toilet. However, when choosing to squat, it is convenient for people to have very little knowledge. So let's introduce itHow to choose a squatting urinal

How do I install it when I buy it home?

1. Observe the outer ring: mainly rectangular, there are also a small number of squares, and there are a very few opposite sexes. Generally, the rectangle is chosen, and the length of the tile should be matched, so that the decoration workers can also cut the tiles and splice them beautifully.

2. Observe the inner circle: mainly consider his practicability. Especially for the elderly or children at home, it is necessary to pay attention to the anti-slip groove of this anti-slip design is to play this role, and his regular pattern is also a decorative role.

3. Measure the total height: not too high, it is recommended to 230mm, and then high means that you have to fill the sanitary cement, sand and gravel, the waterproof layer will be raised, and the cost will come up, and the waterproof layer of the bathroom will be raised, which is not convenient for people to walk, especially the elderly and children.

4. Look at the wall distance: the general wall distance is 350 mostly, this is not to see the size of the main look and whether the size of your home is correct, otherwise even if you buy it, you can't install it.

5. Understand**: This depends on the individual's spending power, but there is a basic **150 yuan or so squatting toilet on the market.

6. Look at the whole: well-known stores have their own characteristics, with model rooms, and put various qualification certificates that can prove their strength in a more obvious position. Whether the sample is placed neatly and beautifully can reflect the manufacturer's attention and attention to its own brand from one side.

7. Touch the surface: The glaze and body on the surface of the high-end squatting toilet are relatively delicate, and there will be no uneven feeling when touching the surface. The glaze of the mid-to-low-end squatting toilet is relatively dark, and under the illumination of the light, you will find pores, and the glaze and body are relatively rough.

8. Weight: high-grade squatting toilet must use high-temperature ceramics in sanitary ceramics, the firing temperature of this ceramic is above 1200, and the material structure is all completed in crystalline phase transformation, and the structure is extremely dense glass phase, which meets the requirements of all porcelain sanitary ware, and the hand has a heavy feeling.

How to install a squatting urinal:

1. When installing the squatting toilet, the sewer pipe should be reserved at the appropriate position from the wall according to the sewage outlet of the installed squatting toilet, and the distance between the sewer pipe entrance and the ground level should also be determined.

2. When installing the squatting toilet, it is required to reserve the depth of the pit under the ground, and remember that the depth must be greater than the height of the squatting toilet to facilitate installation.

3. Put the connecting rubber plug into the water inlet hole of the squatting toilet and clamp it tightly. Apply a layer of glass glue or putty to the outer edge of the contact with the water inlet hole of the squatting toilet, and insert the water inlet pipe into the water inlet hole of the rubber plug so that it is well sealed with the rubber plug to prevent water leakage.

4. During installation, it is necessary to coat a layer of glass glue or putty on the edge of the outlet of the squatting toilet, screw the wheel mouth of the draft stove into the sewer pipe, and use coke slag or some other filler to erect the squatting toilet horizontally.

Through the above understanding, everyone has a certain understanding of how to choose a squatting toilet. If you want to install it yourself, you can do so according to the methods mentioned in the article.

1. From the overall consideration: under normal circumstances, brand stores will find a model space for customers to choose. They will also put the certificate that can prove their own quality in the store, and when purchasing, the first thing to see is whether its appearance is beautiful and neat, which can let us see at a glance the manufacturer's dedication to the product.

2. Touch the surface: Generally, the surface of the high-quality squatting toilet is relatively smooth, and we do not have a bumpy feeling when we touch it with our hands, and the color of the inferior squatting toilet is usually darker, and many small pores can be seen in the sun.

3. Pick it up and take a look at the quantity: high-end ceramics are usually used in the production of high-quality squatting toilets, because this kind of ceramics generally need to be made at a high temperature of 1200 degrees, and then crystallized into a fine glass phase, so the squatting toilets of this material will be very heavy, and they can be judged by the weight of the squatting toilets whether they are of high quality.

Squatting toilets are commonly used sanitary ware in our homes, and a good squatting toilet can make our lives more comfortable. Today I will take you to see how to choose a squatting toilet.

1. Look at the brand.

Well-known brands generally have a professional R&D and production team, and their products have been tested by many experiments, and the raw materials are relatively in line with the specifications. Moreover, the squatting toilet is a long-term use of supplies, if there is no good after-sales service, then it is difficult to protect the rights of what quality problems occur.

2. Look at the water absorption.

Squatting toilets are generally made of ceramic, and the quality of this ceramic mainly depends on the water absorption. The water absorption rate of high-temperature ceramics is lower, the product is very convenient to clean, it is not easy to absorb odors, it is not easy to yellow, and the problems of glaze cracking and local water leakage are relatively few. If it is a medium and low temperature ceramic, it is very easy to enter the sewage, and it will crack after a long time.

3. Look at the material.

The glaze and embryo body on the surface of the high-quality squatting toilet are very smooth and delicate, and it will not be uneven when touched by hand. The squatting toilet of poor quality can easily find pores under the light, and the glaze and embryo body are relatively rough. High-quality squatting toilets are generally made of high-temperature pottery, which is compact and heavier to pick up.

4. Look at the pit distance.

The pit distance of the squatting toilet refers to the horizontal height of the center of the sewage outlet from the center of the dot to the back wall, and we must choose the appropriate squatting toilet according to different pit spacing. If the pit spacing is 34-44 cm, you should choose a back-drain squat, and if it is 48-58 cm, you should choose a front-drain squat.