How to make a handmade lantern, how to make a lantern handicraft

1. First prepare the materials needed to make straw lanterns:

Disposable cups, straws, scissors, rubber bands, utility knives, rope, first use scissors to cut off part of the upper edge of the disposable cup, and then use a utility knife to make a hole in the bottom of the disposable cup, and pass the rope through the hole at the bottom of the disposable cup.

2. Fill the bulb into the disposable water cup, and then cut the prepared colorful straw to a slightly longer length than the disposable water cup.

3. Arrange the cut straws around the disposable straws in turn, fix the straws with ropes, and the simple straw lantern is completed. Power on the bulb and you'll get a simple and beautiful handmade lantern.

2. Then, with a knife without a blade (you can also use a pen), than the ruler to draw out the horizontal line, at first, I originally wanted to leave a 1cm edge on both sides, just use the knife, but the knife is not optimistic, one is a long time, the other is the knife pulled out is not beautiful. I switched to scissors, cutting off one side and leaving the other.

3. Choose a rectangular piece of paper and cut out a wide strip of paper and a wide strip of paper. The back of the two long strips of paper is glued with double-sided tape, first use a wide strip of paper to glue the large rectangular paper where it is cut into one piece, this step be patient, each one must be glued densely.

Wide strips are glued to the uncut side of the large rectangular paper. Then fold up on both sides.

Handmade lanterns (handmade).

5. Cut out 4 strips of paper that are shorter than the cylinder, why do you use them? If you look at the picture, you can understand that it is used to fix the lantern to "open its mouth". Double-sided tape is glued to the ends of each of the four strips of paper, first from one end of the lantern in a cross shape, then the lantern is pressed down, and the other end of the strip of paper is glued to the mouth of the lantern.

1. First find a piece of hard red paper or * paper as the roll paper bucket material, and then find two pieces of red paper, * larger than the paper tube hard paper or more than 20 cm long.

2. Fold the cardboard into a cylinder, and staple the two ends of the cylinder with staples or glue. The circumference of the paper tube should be less than the width of the tissue paper.

3. Fold both ends of the width of the two sheets of tissue paper (with a slight imprint or draw a straight line with a pencil), and then use scissors or a paper cutter to cut the middle of the tissue paper into strips about 1 cm wide, and cut them to the imprint folded at both ends, do not cut through.

4. Then stick one end of the cut tissue paper to the end of the paper tube with glue or staples, and the two pieces of paper should be staggered and wound around the paper tube. The same is true at the other end.

5. Tie small holes at both ends of the paper tube with a sharp needle, tie a rope carrying a lantern at one end, and tie a red lamp spike at the other end.

Precautions: When making paper lanterns, whether it is paper cutting or paper cutting, you need to fold the traces, but do not fold the traces too much, and the imprint is not obvious, otherwise it will affect the appearance. In addition, the middle paper tube can be used a little harder advertising paper or other packaging paper, which is better for waste utilization.

The handmade lantern method is as follows:Preparation materials: cardboard, scissors, needle and thread, double-sided tape, disposable chopsticks.

1. Fold the jammed paper in half.

2. Cut it with scissors according to **.

3. Roll the jammed paper a few more times, it looks like there is an arc.

4. Open the jammed paper, glue double-sided tape on one side, and glue it on the other side.

5. Shape the glued barrel under it.

6. Thread several threads on both ends of the lantern with needles, and tie disposable chopsticks to the threads at one end.

7. Use scissors to cut the cardboard into thin strips and tie them to the lantern.

Lanterns

Lanterns, also known as lanterns, are ancient Chinese Han traditional handicrafts, which originated in the Western Han Dynasty more than 2,000 years ago. The lantern integrates the art of painting, paper-cutting and other crafts, there are various types such as palace lanterns and yarn lanterns, and from the modeling, there are figures, landscapes, flowers and birds, etc., as well as the horse lanterns for enjoyment.

Every year around the Lantern Festival on the 15th day of the first lunar month, people hang red lanterns symbolizing the meaning of reunion to create a festive atmosphere. "Lantern" article: Although it is not like a lantern moth, it loves light and burns itself, children like fire and light, but it seems to be nature, Bao'er, who cries when she puts it in a dark room, stops crying when she lights up the lamp.

On cold nights, playing with fire and lights, burning drops of gold on Chinese New Year's Eve, and setting off fireworks are few exceptions in the children's group. Although the adults are afraid of the danger of fire and candles, they will say things that are close to intimidation, such as "playing with fire and drowning in the night", but secretly light candles in the shrine.

Materials required: cardboard, paper knife, ruler, pencil, double-sided tape, cord.

Production steps: 1. Prepare a rectangular red cardboard (I use an expired old calendar card) Make a beautiful little lantern yourself.

2. Set aside both sides of the cardboard, draw a number of parallel lines according to equal parts, and then cut them with a paper knife.

3. Roll it up to make the cardboard arc-shaped.

4. Paste the leftovers into thin strips for spikes, and then stick the strings to make beautiful small lanterns yourself.

The lantern combines painting, paper cutting, paper tie, piercing and other crafts, and is closely related to the life of the Chinese. The lantern has become a symbol of Chinese festivities. Through the inheritance and development of generations of lantern artists, a rich variety and superb craftsmanship have been formed.

From the types: palace lamps, yarn lamps, chandeliers and so on. In terms of modeling, there are characters, landscapes, flowers and birds, dragons and phoenixes, fish and insects, etc., in addition to the marquee lanterns for people to enjoy.

I believe that many children like to do handicrafts, and parents are willing to accompany their children to do handicrafts, but doing handicrafts is not just about doing it, but also needs to do some learning. During the Chinese New Year, many children like to light a celebratory lantern, there are all kinds of beautiful lanterns on the market, but these lanterns are not as good as the lanterns they make, because they will have a sense of accomplishment when they take out the lanterns they make. So, how should handmade lanterns be made?

In fact, it is very easy to make handmade lanterns, so please come and learn how to make handmade lanterns together.

One: Prepare the materials for making the lantern.

Today we are going to learn how to make lanterns out of paper cups. Start by preparing two paper cups, a pair of scissors, and some double-sided tape and scotch tape. Once you're ready, it's time to start making your handmade lanterns.

Two: Use scissors to cut the cup.

First pick up a paper cup, then use scissors to cut off the rim of the cup, then put the cup upright, and use scissors to cut the cup into strips as the main body of the lantern, but do not cut to the bottom, the bottom of the cup needs to be retained. After cutting, take out another cup and cut the bottom of this cup with scissors.

Three: Glue the cup with double-sided tape.

Glue the opening of the main body of the cut lantern and the bottom of the freshly cut cup together with double-sided tape, and a lantern is roughly completed. Then use a stick or paper stick to make the handle of the lantern, and you can also dye the lantern in your favorite color, such as red, so that a lantern is complete. Finally, light the candle and put it at the bottom of the lantern, and stick the door well, the paper at that time is slightly transparent, and it is also very bright to jump with a stick, of course, you must be careful that the candle is not too big, otherwise it is easy to burn the lantern.

Isn't it easy to make handmade lanterns? If you like it, learn how to do it.

The answers to this question shared above are all personal opinions and suggestions, and I hope that the answer to this question I have shared can help you.

First of all, find a nice glass bottle and put it along the mouth of the bottle. Hide the switch battery in the cap. Then find a rope and pick it up with a stick.

This requires a pair of skillful hands, first of all, the skeleton must be made, cut into thin strips with bamboo, and then the shape is fixed. It would be nice to paste it with a nice layer of transparent red paper, and of course you can choose other colors.

To make paper, take a piece of red paper, cut the paper into the shape of a lantern, and then stick it on the stand.