How do you make a good looking paper lantern? How to make paper lanterns is simple and good looking

Simple lantern method: If you can't make the "big guys" sold on the street, and you can't find any materials such as steel wire and steel plate, then use bamboo strips, rice paper, pen and ink to make a simple paper lantern. The materials and process of making paper lanterns are very simple, so you can design your favorite patterns and patterns, and add a lot of fun to the festival.

The first step is to make a skeleton. The relatively simple shape of a paper lantern is a cube or cylinder, and it is best to use bamboo branches or bamboo bark that can be bent to form a frame, and tie the joints with thin wires. If you can't find it, you can also use slender strips of cardboard and bamboo skewers for barbecue, which will lack firmness and flexibility, but they are also very good decoration for the interior.

The second step is to make the lamp body. Buy a few pieces of white or red ordinary rice paper or sprinkle gold rice paper at the Four Treasures of the Study, cut them to the length and width of the lantern skeleton, and then you can design your own patterns. Calligraphy, painting, and paper-cutting can all be displayed on a small lantern.

After pasting, you can also use narrow strips of imitation silk paper to edge up and down, which looks more elegant, much like an ancient palace lamp. If you are not very good at calligraphy and painting, there is a simple way to refer to it. Use a piece of tissue paper to trace the desired character on the notebook, then overlap the tissue paper with crimson rice paper, and use a single-edged blade to dig out the handwriting.

When the tissue paper is removed, hollowed-out handwriting appears on the red rice paper. The body of the lamp is made of white rice paper, and the red rice paper is pasted inside, and the candlelight or light is reflected from the hollow, and the effect is quite beautiful.

The third step is to make a light source. If you put it indoors, you only need to light a regular candle in a lantern; If you want to carry it out, it's best to make a simple circuit with a light bulb and a battery. It may look a little rough, but lighting your own handmade lantern during the Lantern Festival will definitely have a different flavor.

The paper lantern method is as follows:

Method 1: 1. Prepare a rectangular red cardboard shirt and roll a beautiful little lantern made by yourself.

2. Leave a number of parallel lines on both sides of the cardboard to centimeters, and then cut them with a paper knife.

3. Roll it up to make the cardboard arc-shaped.

4. Paste the leftovers into thin strips for spikes, and then stick them on the rope.

Method 2: 1. Prepare a rectangular red cardboard (I use an expired old calendar card) to make a beautiful little lantern by myself.

2. Leave both sides of the jammed paper. 0cm, draw a number of parallel lines in equal parts, and then cut them with a paper knife.

3. Roll it up to make the cardboard arc-shaped.

4. Paste the leftovers into thin strips for spikes, and then stick the strings to make their own beautiful small lanterns.

5. How about it, the beautiful little lantern is good, do you like mine, thank you.

Method 3: 1. Purchase the colored paper needed, fold it in half, and repeat the steps for all colored paper.

2. Fold it in half again, turn it over and fold it in half along the middle line, and then fold the two corners in half along the middle line.

3. Open, fold the corners on both sides along the midline, open, fold the two small corners inward, and stuff them together to complete 12 of these.

4. After finishing, glue them together, thread them in the middle, and then hang tassels.

The lantern made of paper is simple and good-looking, and the steps are as follows:

Prepare materials: cardboard, needle and thread, scotch tape and hole punch.

1. Draw evenly spaced on the rectangular cardboard and punch holes.

2. Thread at intervals with stitches. Guess.

3. Roll up the cardboard and fix it with tape.

4. Tighten the rope of the cover and make a shape inside the lantern.

5. Install a ribbon on the hole to make a lanyard.

6. The cute cardboard lantern is ready.

Glue sticks. Scissors.

Markers. White.

Confetti. 01 Prepare the materials.

02 Cut out a long strip of paper from the colored paper.

03 Fold the confetti in half to the left.

04 Fold the left side of the opening back a short bit.

05 Fold this small section on the left side without cutting, and cut the right side into small thin strips.

06 Open the colored paper and cut it in the middle.

07 Glue the top and bottom sides of the colored paper with glue sticks, glue the two sides together, and surround the lantern.

08 Cut a small note from the colored paper.

09 Glue a small note to the lantern and use it as a lantern handle.

10 Draw a butterfly on a blank piece of paper with a colored pen and cut it out with scissors.

11 Glue the butterfly to the front of the lantern, and the butterfly lantern is done.

The meaning of the lantern is truth, goodness, and beauty, and the practice is as follows:

Materials: red paper, yellow paper, double-sided tape, knife, scissors, rope.

1. First cut the red A4 paper from the middle, fold half of it up and down about one centimeter, and paste double-sided tape on the folded place.

2. Then draw the knife every 5 mm on the red paper, the more accurate the stroke, the better, and put it aside for later use.

3. Then cut the yellow paper into a 11 cm wide rectangle, paste double-sided tape on one side of the rectangle, and roll it into a barrel.

4. Tear off the double-sided tape on the red paper, align the edge of the red paper with the cylinder, and glue the double-sided tape on the upper and lower sides of the cylinder.

5. Next, cut the remaining red paper into a 5 cm rectangle, fold it below the top 1 cm, paste double-sided tape, and cut out the lantern spike.

6. Then roll the lantern tassel on the rope, make the top and bottom of the lantern with two 6 cm yellow squares, and pass the finished lantern tassel through the bottom of the lantern.

7. Finally, glue the lantern, glue the bottom of the lantern, and then pass through the top of the lantern, and glue the top well.

The lantern origami is as follows:

Tools and raw materials: 12 sheets of square paper, double-sided tape, tassel rope.

1. Fold the square paper into a triangle along the diagonal, press out the creases and open them, and then align the sharp corners on both sides and fold them in the middle.

It became like this: <>

2. Flip it over, align the midline and fold it well.

3. Flip it over, align the center line and fold it in half, and press out the crease.

4. Align the sharp corners on both sides with the creases you just folded.

5. Open it and fold the triangles at both ends inward.

6. Align the two sides in the middle along the crease and tuck one side into the other.

7. Use the same method to make the remaining eleven.

8. Glue double-sided tape on both sides of one of them, and glue the other one on the same line.

9. When gluing to the sixth in turn, glue a double-sided tape in the middle and glue the tassel rope.

10. Glue all of them in turn.

11. The paper lantern is ready.

The paper lantern handmade method is as follows:

1. First find a piece of hard red paper as the material for the roll paper bucket, and then find two pieces of red paper, the paper tube is large or more than 20 cm long.

2. Fold the cardboard into a cylinder, and staple the two ends of the cylinder with staples or glue. The circumference of the paper tube should be less than the width of the tissue paper.

3. Fold both ends of the width of the two sheets of tissue paper (with a slight imprint or draw a straight line with a pencil), and then use scissors or a paper cutter to cut the middle of the tissue paper into strips about 1 cm wide, and cut them to the imprint folded at both ends, do not cut through.

4. Then stick one end of the cut tissue paper to the end of the paper tube with glue or staples, and the two pieces of paper should be staggered and wound around the paper tube. The same is true at the other end.

5. Tie small holes at both ends of the paper tube with a sharp needle, tie a rope carrying a lantern at one end, and tie a red lamp spike at the other end.

Precautions: When making paper lanterns, whether it is paper cutting or paper cutting, you need to fold the traces, but do not fold the traces too much, and the imprint is not obvious, otherwise it will affect the appearance. In addition, the middle paper tube can be used a little harder advertising paper or other packaging paper, which is better for waste utilization.