What is the height standard for street lamp poles, and the national standard for street lamp poles

The height standard of street light poles is based on different road types and usage environments. Generally speaking, the height standard of street light poles is determined based on the following factors:

1.Road type: Different types of roads have different lighting needs for street lights, so the height of street light poles will also vary.

For example, street light poles on highways are generally taller to provide longer illumination distances; Whereas, street light poles on urban roads are generally lower to provide illumination at a closer distance.

2.Environment: The height of the street lamp pole will also be adjusted according to the different use environment.

For example, on narrow streets, in order to avoid street lamp poles taking up too much space, a lower pole height is generally chosen; In spacious squares or parks, a higher pole height can be chosen to provide a wider range of illumination.

3.Lighting requirements: The height of the street lamp pole will also be determined according to the lighting requirements. Different lighting requirements may require poles of different heights to achieve. For example, some roads may require stronger lighting, so taller light poles are required to install brighter fixtures.

In general, the height standard of street light poles is based on a comprehensive consideration of factors such as the type of road, the environment in which it is used, and the lighting requirements. In practical application, it needs to be adjusted and determined on a case-by-case basis.

Legal analysis: 1. The installation height of lamps and lanterns must be the same as the installation height of lamps and lanterns on the same street (the height from the luminous center to the ground). Small bend light: One meter light, 5-6 meters, ordinary street, long arm lights and chandeliers, meters, fast lane arc lights are not less than 8 meters, slow lane arc lights are not less than meters.

2. The special lamp type is installed according to the design requirements, and the height of the lamp is equivalent to the width of the road to be illuminated. When illuminating only on one side hl when illuminating on both sides hl 2 where, h: luminaire installation height (m) l:

Road width (m). Street lamps and lanterns part 1, lamps and lanterns should be firm and upright, and there should be no loosening and crooked phenomenon. 2. The lampshade of the nuclear early grandson should be intact and not broken.

3. The enamel umbrella is corroded, and the deformed one should be replaced. 4. The reflective mirror of the lamp fails and should be replaced. 5. The lamp should not be damaged or deformed during transportation, installation, the lampshade should be added with a rubber ring, and the lamp mouth should be replaced when the porcelain is broken and exposed copper.

6. The lamp and lamp body should not be bent, and the fixing screws of each part should be tightened with spring eyeliner and refused to be loosened. 7. There are cracks in the cast iron lamp head, and the block cannot be used, and there is no unqualified rubber. 8. The lamp body hoop should be suitable for the electric pole, and the device should not be too long.

Legal basis: "Technical Conditions for Road Lighting Poles of the People's Republic of China" is a product standard for the urban construction industry, and the chain number is CJ T527-2018, which will be implemented from April 1, 2019.

The height of the street lamp is generally 6 8 10 12 meters The specific use should be based on the width of the road surface If the lamp is generally unilaterally distributed, the height of the street lamp is consistent with the width of the road surface Or the height of the street lamp is less than the width of the road surface 1 meter The spacing of the street lamp is generally a multiple of the height of the lamp pole Sodium lamps are not commonly used are 150w 250w 400w 150w is generally suitable for 6 meters below 250w is suitable for 6-10 meters and more than 10 meters are generally 400w.

5 to 12 meters It depends on the road conditions We are the manufacturer.

We all know that illuminance is equal to the luminous flux (lumen) that falls on the surface of the object divided by the area of the illuminated surface (m * 2), the current LED light efficiency is about 2 times that of traditional lighting, 10 meters of high pole lamp is generally designed as a 600W to 1000W high-pressure sodium lamp, its luminous flux size is about 60000LM 120000LM, and 100W LED street lamp is equivalent to the 250W lumen output of the traditional sodium lamp at most, which can not replace the traditional high-pressure sodium lamp at all, What's more, its light decay is serious.