How to turn off the system prompt to reduce the sound of the mobile phone with headphones for a long

1. Reason 1: The earphones are not compatible with the mobile phone.

Solution: It is recommended to try the original one.

2. Reason 2: Mobile phone software conflict.

3. Reason 3: The in-line control button of the earphone is damaged or cannot be reset, resulting in the automatic adjustment of the volume when plugged in.

Solution 1: Try to restart your phone, and after restarting your phone, observe whether your phone is still in headphone mode.

Solution 2: Observe whether there is any foreign object in the headphone jack, and if there is a foreign object, carefully clean the earphone jack with a thin object. Plug the earphones into the headphone jack again, and try to plug and unplug them with different strengths and angles to see if the phone returns to normal.

4. Reason 4: It may be a problem with the mobile phone settings.

Solution one: Back up your phone's important data and try to factory reset your phone.

The above is the treatment method for automatically increasing and decreasing the volume when the mobile phone is plugged into the headphones, and if you encounter the same problem, you can follow the above methods to solve it.

1. The main purpose is to protect the user's hearing, because the external speaker is affected by the external environment, so the decibel will be relatively high, and after the headphones are brought on, the interference from the external dry sound is relatively less, so there is no need for too high decibels, and it also plays a role in protecting the listener 2. The wire control button of the earphone is damaged or cannot be reset, resulting in the automatic reduction of the volume when plugged in. If the button is affected by excessive external force or sweat and dust, it may be short-circuited or unable to reset, at this time, inserting the earphone into the mobile phone is equivalent to holding the button all the time, so that the volume of the mobile phone is uncontrollably reduced, increased or the voice assistant is awakened.

The system prompt to reduce the sound when the phone wears the headphones for a long time, this cannot be turned off, because this prompt tone is a prompt of the system settings, so it cannot be turned off.

1.It is generally normal for the volume to become low after the hand-made talkie-talkie is plugged into the headphones. 2.

The volume mode will vary depending on the output device (i.e. headphones or speakers), and you can adjust the headphone touch volume and speaker volume separately in the system's volume settings. 3.At the same time, some mobile phones may have a built-in volume protection function, which automatically limits the volume of the headphones after plugging in to prevent the instantaneous loud volume from causing damage to the user's hearing.

3. It should be noted that the volume of the earphones will return to the default state after restarting some mobile phones, so users need to readjust it.

When the phone is plugged in with headphones, the volume automatically decreases, and when the sound is turned up, it will automatically turn back to mute.

1. Generally, when the earphones are plugged into the mobile phone, if the entertainment volume is too loud, the volume will be automatically adjusted to 8-10 in order to protect hearing. However, it is rare to turn the sound directly to silent, and it is possible to adjust it in the "volume".

2. It may be that there is a problem with your headphones, you can try to see if the headphones are faulty on other devices.

3. If there is no problem with the earphones, it may be a problem with the mobile phone, it is recommended to restart the mobile phone and try to see if it improves.

4. If it doesn't work, send the mobile phone to a professional repair point for testing and repair.

If the sound is unstable or automatically increases and decreases after the earphones are plugged into the hand, it is recommended that you try the following methods:

1. Replug the earphones into the earphones and make sure they are plugged into the bottom of the earphone jack.

2. Try to replace the earphones.

4. Restart your phone.

5. If it doesn't work, back up the data and restore the phone to factory settings. If the problem persists, it is recommended that you bring the purchase invoice, repair card and mobile phone to the local Samsung service center for professional engineers to help you test.

Here's how:

You can put the headphones on another mobile phone or *** to try, if the noise is still very loud, there may be the following reasons:

1. The sensitivity of the earphones is too high, and a small audio voltage can push it.

2. If the shielded wire of the earphone falls off, or there is no shielded wire at all, the shielded wire should completely wrap the signal wire in the form of a braided belt, instead of replacing it with an ordinary single-core ground wire;

Solution: 1. Change the headphones with lower sensitivity and higher impedance;

2. Replace the signal cable of the earphone with a mesh braided signal cable with a shielded wire;

3. Find a friend who understands electronics and welding between the signal line and the ground wire of the left and right channels, and put on a ceramic capacitor 683 or 104.

If the earphones are placed on another mobile phone, it is okay to open the plug-in or audio software on the mobile phone, and restart it.

How do ANC headphones remove noise? 90 seconds to tell you.

It's not a fault, or the headset and the mobile phone don't match well, the sensitivity of the headset is too high, if you really can't stand the noise floor, you can add an impedance line.