How to make three dimensional stickers, how to make stickers

The process of making stickers is as follows:

1. Prepare materials for making paintings, such as leaves, grain, petals, rags, pebbles, colored paper, newspapers, waste paper, etc.;

2. Prepare tools to be pasted, such as paper, glue, scissors, pencils, erasers and painting materials;

3. Prepare the ** to be pasted, and draw the basic graphics to be pasted according to **;

4. Take out the prepared materials and find out the appropriate materials as the materials for pasting the content;

5. Apply the glue to the object, or you can apply the glue to the paper first, depending on the situation of Bigar;

6. Paste the background of the whole painting first, then the main one, and finally the secondary one;

7. After the paste is completed, it can be sorted out.

Here's how to make the sticker:

Prepare materials: colored cardboard, pens, scissors, and glue.

1. Cut out a small square of colored cardboard, fold it in half along the diagonal, and then fold it in half vertically, cut it according to the traces of folding, and cut it to the position shown in the crease, not to the middle.

2. The four creases are cut, the middle position is not cut, the glue is applied in the middle position, one corner is pulled to the middle and pasted well, the corner of the other piece of paper is also pulled to the middle and pasted well, the third corner is also pasted, and then glued in the middle position.

3. Paste the fourth corner in the same way, the general shape of the small windmill is done, and then cut out a small circle, apply glue, and paste the small circle to the middle position.

4. Make another windmill, cut out two pieces of paper, glue on the strip of paper, paste the strip of paper on the white paper, glue the back of the small windmill, paste the small windmill on the top of the strip, and paste the blue windmill as well.

5. Cut a circle again, when the sun is glued on the back of the circle, paste it in the upper left corner, paint the sun with a ray, and then cut out two clouds at will, apply glue on the back of the cloud, and stick the clouds next to the sun.

Stickers:

As one of the most common handicrafts, stickers all show people's interest in appreciating beauty and imagination. Stickers are readily available and can be rubbish, but in the hands of art lovers, they can be transformed into exquisite crafts.

Since time immemorial, people have never given up on this effort, and in the process of passing it down from generation to generation, it has become more and more beautiful and mature. The combination of stickers reflects the beauty of time and space, embodies human imagination, and also creates a new form of artistic expression. There are many varieties of sticker art, such as feather stickers, straw stickers, butterfly wing stickers, etc.

Chinese stickers include handmade feather stickers, Xu Dong Herong leather stickers, Xu Ke collages, wheat pole stickers, "fire" paper stickers, shavings stickers, cloth stickers, zodiac paper stickers, flower and leaf stickers, can stickers, cloth art, butterfly wing stickers, and waterproof stickers.

The sticker method (small hill with birds singing and flowers) is as follows:

Steps. 1. According to personal preferences, choose different color backgrounds for different works that you want to cut and paste, choose a white background, and then draw a small hill with watercolor pens.

Steps. 2. Draw a few small grasses on another piece of paper, and then paint them with color, or you can directly use green colored paper, without coloring, cut them with scissors, and then glue them to the small hill.

Steps. 3. Draw another tree, a flower, paint it, cut it with scissors, and glue it to the small hill, which has flowers, grass and trees.

Steps. Fourth, in the end, use the same method to paste a round of red sun on the sky of the small hill, reflecting the backs of several geese, and it is completed.

Production skills: It is very easy to make stickers, and the materials are also very wide, you can make leaves, grain, flower petals, rags, pebbles, colored paper, newspapers, waste paper, etc.

Prepare the tools to be pasted, such as paper, glue, scissors, pencils, erasers, and drawing materials.

In preparing the ** to be pasted, according to ** to draw the basic figure to be pasted first, and then use the tool to take out the prepared material, find the appropriate material as the content of the paste, and then paste the background of the whole painting first, in the paste of the primary, then secondary, after pasting, finally tidy it up.

In the process of pasting, you can apply the glue to the object first, or you can apply the glue to the paper first, depending on the situation.

It is used for sticking New Year's pictures and propaganda posters on the wall, and the practice of hand-pasting stickers: prepare materials, pencils, colored paper, and pleated paper. Start by sketching out a shape on paper with a pencil.

The crumpled paper is then kneaded into a paper ball. Paste the painted picture in different colors.

Such a good-looking handmade sticker is done. As one of the most common handicrafts, stickers all show people's interest and imagination in appreciating beauty.

The materials of the stickers are readily available, and many of them may be garbage, but in the hands of art-lovers of the mind, they can be turned into exquisite crafts, a traditional art, and it is an expression of beauty.

The process of making stickers is as follows:

Tools: such as paper, glue, scissors, pencils, erasers, and drawing materials.

1. Waste wallpaper. You may find some leftovers in the closet, or buy sample wallpaper from a store. Metal foil or tape.

Use aluminum foil or colored tape from the kitchen. Use**. Old ** can give your collage a retro feel.

Don't cut some of the old ** that you'll use later.

2. Fold the paper, cut or tear it into different shapes. You can use scissors or craft knives to make different shapes. Alternatively, you can tear it directly by hand to show a rough texture.

You can cut out the whole painting or a part, or even just a color or feel. You can cut out the letters of different ** and glue them into a word.

3. Set a theme. You may have already decided on a theme, or you may have come up with a theme out of the blues while you were gathering materials. Either way, your collage is going to revolve around a central idea.

4. Add decorations. While this isn't necessary, decorations can add depth, interest, and highlight to your collage. with ribbons, beads, rope, as well as feathers or fibers. You can find it from home, or buy it from a craft store.

5. Figure out what you're going to put the material on. You can use a piece of paper, a large card or a board box. Whatever you choose, be sure to be able to withstand multiple layers of pasting.

6. Draw the shape first, and then paste the material inside. Mosaic or chaotic graphics, mosaics can have shapes or just a simple pattern or a chaotic pattern. Alphabet, cut out letters from other pieces of paper, and collage out words.

Use only a single shape, such as circles, squares, and other patterns; Repeating patterns can also be used as collages.

7. Collage with glue. Start at the bottom and stick the pieces onto the baseboard. Use plain white glue, glue sticks or plasticine, and try to be as fine as possible.

Try to design an obvious or interesting center and then collage around that part. Keep in mind that not every piece needs to be flat. Try wrinkling or folding to achieve a different feel.

8. Dry the collage. Because collages can have several layers of glue, they need plenty of time to dry. For smaller collages, an hour or so is sufficient.

A brief description of the sticker

A kind of handicraft, showing people's taste and imagination for appreciating beauty, is mainly divided into retro type, cute type, youth type, etc.

Hand paste painting tutorial to make goldfish stickers out of leaves.

Tools Ingredients: leaves, pink paper, scissors.

1. The first step is to find some oval leaves, and then use scissors to cut them into the shape shown below to make the body of the fish.

2. In the second step, use smaller leaves to pose the tail of the fish.

3. In the third step, cut out a small circle with leaves to make fish eyes.

4. In the fourth step, repeat the above steps and make a few more goldfish.

5. In the fifth step, use colored pens to draw circles as water bubbles, and use cypress leaves as aquatic plants, so that a hand-pasted painting is completed.

Here's how to make your own stickers:

I would like to share with you a homemade method of stickers that I learned about the remainder of the world, I hope it will help you.

Prepare materials: scissors, glue, pens, drawing paper.

Step 1: First of all, you need to prepare a piece of background color paper, put it at the bottom, you can use blue drawing paper to express the color of the sky.

Step 2: Then prepare a piece of green paper to use as the ground, draw the ground range of the sticker, and cut it with scissors, this is the more common pattern cut out of the sticker, the ground is very commonly used, you can cut it into different shapes as needed.

Step 3: After that, use glue to paste the ground on the background color paper in a suitable position, you can also put it on it first to see if it fits, wait for the overall pattern to come out, and then paste it together.

Step 4: Then draw the grass on the green paper, and then cut it, because the grass is relatively small, you need to be careful when cutting, don't cut it.

Step 6: After that, draw a circle with red paper, and cut it out with scissors, which is the sun on the paper sticker, and cut out a suitable size sun according to the size of the paper sticker.

Step 7: After that, the sun is generally pasted on one corner of the paper sticker, usually the upper right corner or the upper left corner of the search head.

Step 8: After that, we use a white or light-colored paper to draw the clouds of the paper sticker, and cut them with scissors.

Step 9: Then design the position of the clouds first, if it is okay, stick it on the sticker.

Step 10: Then we need to draw the theme part and cut it out with scissors, if you want to have a three-dimensional effect, you can also cut the paper and fold the required origami.

Step 11: Finally, all the parts are glued to the sticker, and the paper must not be put too much glue when pasting, so as not to destroy the sticking area too much, lose the three-dimensional sense, and the beautiful handmade sticker is done.

The above is about the handmade method of stickers, so let's do it.