What are the tips on how to polish the surface of the refrigerator

Updated on home 2024-06-12
22 answers
  1. Anonymous users2024-02-11

    If you want to wipe the surface of the refrigerator, you can use some laundry detergent and salt, stir it evenly in a certain proportion, and then spray it on the surface of the refrigerator, use a sponge, and gently insert it on the outer surface.

  2. Anonymous users2024-02-10

    In this case, you can add some salt and some baking soda to it, so that it can achieve a good cleaning effect.

  3. Anonymous users2024-02-09

    1.Use a cloth dipped in toothpaste to gently wipe the yellow stain 2Use the leftover radish head to wipe the stain repeatedly to remove it.

    3.To wash dirt or grease areas, you can first use a used tea bag (rinsed and dry) to dip some cooked oil to apply the dirty area, and then wipe it with a rag with detergent to easily remove the stain, which can reduce the amount of water and detergent.

  4. Anonymous users2024-02-08

    Don't use a rag to rub hard, otherwise it will hurt the surface of the refrigerator, you can focus on wiping some parts that are not easy to wipe, you can use cleaning solution to apply, you can also use toothpaste, the effect is also good.

  5. Anonymous users2024-02-07

    You can use lemonade, or gently rub it on the surface with dish soap, then cover it with plastic wrap, wait for half an hour, and then tear it off, and gently rub it off, which is a good way to use.

  6. Anonymous users2024-02-06

    Hello, in general, you can use toothpaste directly. Wipe it with a cloth, you don't need to use something too hard, which will scratch the surface of the refrigerator.

  7. Anonymous users2024-02-05

    There are many tricks to polish the surface of the refrigerator, first you can use toothpaste, wipe it and then polish it with polishing cotton.

  8. Anonymous users2024-02-04

    The refrigerator needs to be maintained, if you measure the surface difference first, pay attention to long-term maintenance, and pay attention to wipe it with a soft towel when wiping.

  9. Anonymous users2024-02-03

    Usually the surface is full of dust plus some static dust, you can wipe it with a damp rag, that is, with a dry rag.

  10. Anonymous users2024-02-02

    How to polish the surface of the refrigerator, what tips on this subject can only be passed in relation to. Professional extenders and detergents can achieve the corresponding results.

  11. Anonymous users2024-02-01

    The inside of the refrigerator is polished, which is to be stronger, and it is OK to scrub it clean.

  12. Anonymous users2024-01-31

    Painting is to choose this suitable, this kind of cleaner is basically not much skill, you must be diligent is to paint like this.

  13. Anonymous users2024-01-30

    Refrigerator surface cleaning skills in the kitchen at home, stainless steel stains are as bright as new the moment they are wiped off.

  14. Anonymous users2024-01-29

    Hello, call ** to the after-sales customer service, and they will arrange personnel to come to repair and install.

  15. Anonymous users2024-01-28

    The surface of the refrigerator is shiny, and you can use a little detergent to remove the ash and wipe the refrigerator very clean.

  16. Anonymous users2024-01-27

    First of all, there is no damage to the surface of the refrigerator, wash it with clean water, and then soak it with high-grade car waxing oil to make it clean as new.

  17. Anonymous users2024-01-26

    1. If the shell of the refrigerator is dirty, you can use a clean rag dipped in some toothpaste to wipe it slowly, or you can wipe off the dust with a soft cloth dipped in it.

    2. If the shell of the refrigerator is yellowed, you can use a metal brightener to wipe it, dip it in some brightener on the softness, and gently wipe the yellowed place to restore its original appearance. Apply a polish wax to the refrigerator (or a colorless hose shoe polish) to keep the refrigerator case looking like new.

  18. Anonymous users2024-01-25

    Refrigerator defrost tips.

    1. Before putting in the frozen food, apply a layer of plastic film to the wall of the freezer, which is easy to apply quickly with the cold air of the freezer, and then put the food into the freezer. When it is necessary to defrost, quickly move the frozen food into the refrigerator for temporary storage, as long as the plastic film of the freezer is removed, the frost will be removed quickly, and then the shaken clean film is applied to continue to freeze the food. It takes time before and after.

    One or two minutes, very time-saving, trouble-saving, and power-saving.

    2. After each defrosting, wipe the freezer with a towel, and then apply a layer of vegetable oil on the surrounding aluminum walls, and wait for the next frost, because it is attached to the refrigerator wall containing oil, the suction between the frost and the refrigerator wall is greatly reduced, so you don't have to spend much effort to easily peel off the lumps.

    3. When you need to defrost, first cut off the power supply of the refrigerator, and then use an electric fan or hair dryer to align the freezer to the maximum gear, and the frost layer will melt very quickly after the wind blows, so that it is easier to remove it again.

  19. Anonymous users2024-01-24

    1. Plastic film.

    Before putting in the frozen food, the wall of the freezer is covered with a layer of plastic film, which can be applied quickly with the cold air of the freezer, and then put the food frozen, when it is necessary to defrost, the frozen food is quickly moved into the refrigerator for temporary storage, as long as the plastic film of the freezer is removed, the frost will be removed quickly, and then the shaken clean film can be applied again, and the frozen food can be continued again.

    2. Hair dryer or electric fan.

    Use a hair dryer or electric fan to slowly blow the ice and add a towel to the refrigerator layer to absorb the water, the frost layer will melt very quickly after the wind blows, so that it is easier to remove it again.

    3. Vegetable oil.

    After each defrosting (de-icing) of the refrigerator, wipe the freezer with a towel, and then apply a layer of vegetable oil to the inner wall around it, and when the next frost is formed, the suction between the frost and the refrigerator wall is greatly reduced because it adheres to the refrigerator wall containing oil, so it can be easily peeled off without much effort.

    Fourth, natural melting.

    First of all, unplug the refrigerator, take out the drawers and things in the refrigerator, clean the drawers, let the frost inside melt naturally, dry with a rag, and then restore, although this method is good, but after all, it takes time.

  20. Anonymous users2024-01-23

    Wipe down the surface of the refrigerator at least once a week.

    2. If there is grease or dust, wipe it with warm water.

    3. The inside of the refrigerator can be wiped with boric acid or disinfectant tissues, and the shelves should be taken out and cleaned with water.

    4. The inner wall of the refrigerator can be wiped with glycerin to form a thin protective film, which can be easily wiped off even if it is stained with milk or food residues.

    5. Sometimes vinegar is used instead of boric acid, which can prevent the formation of rust.

    6. Wipe the refrigerator with boric acid, which can be easily defrosted.

    7. Be sure to cut off the power supply before cleaning.

  21. Anonymous users2024-01-22

    Alcohol, diluted with a cloth dipped in a rub, or with toothpaste, absolutely effective, hehe, I did it in the refrigerator factory

  22. Anonymous users2024-01-21

    Teach you how to clean the refrigerator seal.

Related questions
7 answers2024-06-12

In fact, how to wipe the piano sounds very simple, and many people have their own wiping methods! But wiping the piano is a primary school question, how to wipe the piano paint surface is less damaged, how to polish bright, not everyone is clear! Next, I will bring some good methods we have summarized to consumers! >>>More

11 answers2024-06-12

Buy a new elbow plastic sanitary brush, carry a small bucket of water to soak the brush, and scrub the glass directly. Due to the strong cleaning power of the plastic sanitary brush, the dust on the outward side of the glass can be brushed off, and the brush has a certain length, which can easily clean the glass. If the glass is too dirty, you can put some detergent in the water. >>>More

6 answers2024-06-12

Arctic Circle. The Eskimos had no mud and sand, so they had to cut the ice into bricks to build houses that could withstand the cold winds. >>>More

9 answers2024-06-12

A little trick to wipe the glass, no longer afraid that the glass will not be clean.

14 answers2024-06-12

Reasons: 1. The embedded material particles are coarse and not delicate after stirring. >>>More