How to repair a 12v battery? The 12V battery has lost power and repaired it

Updated on Car 2024-06-11
11 answers
  1. Anonymous users2024-02-11

    Open the battery cover and remove the 6 hard hats.

    Fill each well with distilled water with a syringe, and if the electrolyte is standard, the plates may burn out due to high acid solubility. For example, when we eat hot pot, why do we eat more and more salty, that is to say, when the water evaporates, the salt will not evaporate through the water vapor, and in the same way, the acid in the battery will not be evaporated, what is missing is water, so we only need to add about 20-30ml of distilled water to each small hole. As shown in Fig

    After filling up, let the battery stand still for half an hour to allow the sponge around the plate to fully absorb the water. Then use resistance discharge, the battery in the electricity, all discharged, no resistance, can be replaced by a 12V bulb, such as: motorcycle headlights, car turn signals can be, as long as it can play the role of discharging to 0V.

    How to judge that the battery is close to running out, the cement resistance discharge is hot at the beginning, and slowly gradually does not heat, and then the battery is out of power. As long as the light bulb is slowly not lit, it means that the battery discharge is over, and the discharge time depends on the capacity of the battery when it is discharged. As shown in Fig

    After the discharge is over, the battery can be charged by pulse charging, because the pulse charging method can effectively remove the vulcanization of the plates and improve the capacity of the battery. If you don't have it, you can also replace it with a car charger.

    Charge the battery) below takes pulse charging as an example.

    Once the charging is complete, use a syringe to pump out excess water from each well. A total of 6 holes, completed step by step.

    Cover the hat and lid, and it can be loaded into the car.

  2. Anonymous users2024-02-10

    Hello, the battery on the vehicle has maintainable and maintenance-free According to your description, it should be a maintainable battery repair. Replace or add dilute sulfuric acid inside, generally bought distilled water for addition. There are also some 4S shop battery repair instruments, to put it bluntly, it is to charge the battery with a small current and deep current.

    to awaken the activity of the battery. Restore the memory of the battery, but the repair effect is average, and the use time can not be guaranteed. It is recommended to replace the battery with a new one.

  3. Anonymous users2024-02-09

    Look at what's wrong, just like people, what medicine to take when you're sick.

  4. Anonymous users2024-02-08

    The repair method of 12V maintenance-free battery power loss is to take the fire line and emergency starting energy.

    After the car battery loses power, the common remedy is to take the fire wire, ask another car to be placed side by side or in the form of head-to-head, find two red and black iron wires to connect the two car batteries, and then power the vehicle to start the vehicle, and the vehicle with power loss can insert the key to try to start the vehicle.

    If it cannot be started smoothly, increase the throttle of the power supply vehicle to about 2000 rpm, wait for 3-5 minutes and then continue to try to start the vehicle with a loss of power, so that the engine of the power loss vehicle can be successfully started after repeated operations.

    In addition, there is a way to prepare an emergency starting power supply, which is equivalent to a giant power bank, which is positively and negatively connected with the battery of the power-deficit vehicle, and can also be used to start the vehicle in an emergency. There is also a local method, when the vehicle loses power, the manual transmission model is hung into the second gear, and then find a few people to help push the vehicle behind, and slowly release the clutch to the semi-clutch when reaching a speed of 10km h, and try to turn the key to successfully start the vehicle.

    The last remedy is also a way to do it, call the rescue**, let the local after-sales service network staff help solve it, the above three methods may be used, or the method of replacing the new battery may be used, in short, there is no need for excess expenses, which is not friendly to ordinary salaried income groups.

    As a key component of the automotive electrical system, the importance of the car battery is self-evident, good habits and maintenance methods can make the battery use for about 5-6 years, when the vehicle feels that the charge is insufficient, or the start is weak, the headlights are dim, you have to think about whether the battery is losing power.

  5. Anonymous users2024-02-07

    The remaining 10V of the 12V battery is repaired as follows; 1. Check the electrolyte of the battery to ensure that the concentration of the electrolyte is normal, if the concentration is lower than the standard, the electrolyte needs to be replenished; 2. Check the contact of the battery to ensure good contact; 3. Check the temperature of the battery, if the temperature is too high, you need to take appropriate measures to reduce the temperature; 4. Check the charging of the battery, if the battery is not charged normally, it needs to be recharged; 5. Check the aging of the battery, if the battery is found to be aging, you need to replace the new battery; 6. Check the insulation of the battery, if the insulation is found to be poor, you need to re-check the insulation of the battery.

  6. Anonymous users2024-02-06

    The 12V battery can be repaired by pulse repair method and pulse voltage when the battery is de-energized. The impulse voltage can be between 60V and 300V instantaneously, and the battery power loss can be repaired.

    When the car battery is out of power, you can use the emergency mode, find a normal battery, and then connect it with a battery cable, the positive pole is connected to the positive pole, and the negative pole is connected to the negative pole. Then start the vehicle. After the vehicle starts, quickly unplug the battery cable.

    Then keep the vehicle on for 10 to 20 minutes, or drive more than 10 kilometers to recharge the vehicle's battery.

    Cause of power loss: After the vehicle is stopped, the vehicle key is not pulled out, or it is not completely closed, which affects the battery power loss. The vehicle generator is damaged and cannot charge the battery normally, resulting in a loss of power to the vehicle battery.

    There is a short circuit in the circuit of the car, which causes the battery to lose power. After the vehicle is stopped, the headlights of the vehicle are not turned off, the power supply of the external dash cam is not unplugged, and the external seat heating is not unplugged, which will also cause the vehicle battery to lose power.

  7. Anonymous users2024-02-05

    Charge first, if you charge for 4 hours, it's still the same, or if you have 12V, you will return to 10V as soon as you use it. There is basically no maintenance value. Indicates that there is a broken lead plate inside the battery. The only way to do this is to disassemble all the recast lead plates.

  8. Anonymous users2024-02-04

    I saw on the Internet that a 12V charger was used to charge this battery separately, and when it was charged to the same voltage as other batteries, it was connected in series with several other batteries to charge the charger of the electric vehicle.

    If you don't have a 12V charger, you can only go to the repair department to charge it, or buy one yourself online, how to do it, decide for yourself. FYI.

  9. Anonymous users2024-02-03

    It should be that there is a problem with the electrode plate inside the battery, so it is safer to replace it with a new one.

  10. Anonymous users2024-02-02

    Summary. Hello dear, the 12V battery is out of power, and the repair method after that. First, after the battery is lost, you can find the nearest repair shop to start the battery, and then start the vehicle in place for about 40 minutes to charge the battery.

    The second is to use a 12-volt charger to charge the battery separately, if the power deficit is serious, it is recommended to charge for about ten hours. Third, if the vehicle can not be started normally after charging, it means that there is no electricity in the battery, this can only replace the battery, under normal circumstances, the service life of the battery is about 3 to 5 years Hello, I hope I can help you, I wish you a happy life, good luck, eternal youth, if you have any questions, you can consult at any time, I will reply to you as soon as possible.

    Hello dear, the 12V battery is out of power, and the repair method after that. First, after the battery is lost, you can find the nearest repair shop to start the battery, and then start the vehicle in place for about 40 minutes to charge the battery. The second is to use a 12-volt charger to charge the battery separately, if the power deficit is serious, it is recommended to charge for about ten hours.

    Third, if the vehicle can not be started normally after charging, it means that the battery is no longer stored in the battery, this can only replace the electric macro hand ant bottle, under normal circumstances, the service life of the battery is about 3 to 5 years and hello, I hope I can help you, I wish you a happy life, good luck, youth forever buried, if you have any questions, you can consult at any time, I will reply to you as soon as possible.

    How much should a 12V battery have

    The normal measured voltage is around 13V. The relevant rated current is at 60 ah.

    Is it normal to have more than 16v?

    Is 30v0a normal? How to fix it?

    How do you measure this? You're a battery for a battery car, right?

    Be. Tricycle!

    Then your battery is seriously out of power, then this can be charged with a high-power charger, or removed separately and charged with a 12-volt charger.

  11. Anonymous users2024-02-01

    It's a broken battery. If you want to fix it, you need to open the lid and replace the broken battery. The battery is a very important part of the car, and it is also a consumable part.

    When the engine is not started, the battery supplies power to the vehicle's electronics. After the engine starts, the generator supplies power to the vehicle's electronics, and the generator also charges the battery. The service life of a general car battery is:

    It's a broken battery. If you want to fix it, you need to open the lid and replace the broken battery.

    The battery is a very important part of the car, and it is also a consumable part.

    When the engine is not started, the battery supplies power to the vehicle's electronics. After the engine starts, the generator supplies power to the vehicle's electronics, and the generator also charges the battery.

    Generally, the service life of a car battery is 3 to 4 years, but the battery of many cars does not break down for that long, which is caused by the incorrect usage habits of the car owner.

    When the engine is not started, do not sit in the car for a long time and use the electronic devices in the car, as this will reduce the service life of the battery.

    If you don't use the car for a long time, you can disconnect the negative pole of the battery, or you can turn it on when you are free, and let the generator charge the battery, which is also good for the car itself.

    Try to park your car in an underground parking lot or garage at night in winter. Outside temperatures are very low in winter. If you park your car outside overnight, it will reduce the life of the battery.

    During normal maintenance, technicians can check the internal resistance and voltage of the battery with professional equipment. If the internal resistance and voltage do not reach the specified value, it means that the battery needs to be replaced.

    Before winter, it is best to check the battery.

    How to eliminate the tire pressure light after repairing the tire.

    If your car has a tire pressure reset button, you can remove the tire pressure monitoring and warning light by pressing the button directly. If you can't find this button or don't, the tire pressure monitoring warning light will automatically disappear after driving a certain distance.

    Most automotive tire pressure monitoring systems use a wheel speed sensor to monitor wheel speed.

    If the tire pressure of a tire is not normal, then the speed of the wheel is not normal either. At this point, the wheel speed sensor can detect it, so that the tire pressure monitoring warning light on the instrument cluster will be illuminated.

    Tire pressure is very important for tires, and the tire pressure should not be too high or too low.

    High tire pressure reduces the contact area between the tire and the ground, which reduces grip and affects handling.

    If the tire pressure is too low, the tire will be deformed by waves when driving at high speeds, increasing the probability of a puncture.

    Therefore, it is recommended that riders often check the air pressure of the tires when using the car, and often check whether the tire surface is damaged.

    You should pay more attention to the tires of your car when you usually use the car.

    The tire is the only part of the car that touches the ground, which is related to the driving safety and stability of the car.

    Tires are rubber products, and rubber products will age after long-term use, so tires need to be replaced regularly.

    How to fix 12v battery left 10v @2019

Related questions
44 answers2024-06-11

AC 12 cannot be connected to DC 12 without pressure valve, because DC and AC cannot be linked together and cannot be directly connected for use.

19 answers2024-06-11

LEDs are flow control devices, so it is ideal to calculate their rated current. >>>More

34 answers2024-06-11

Chaowei battery 36V10Ah 180 yuan group Applicable models: electric bicycles. >>>More

20 answers2024-06-11

12V40A battery and 12V60A battery, their working voltage is the same, both output 12V, the difference is that their load capacity is different, that is, the output current is different. A 12V60A battery can output a rated current. >>>More

11 answers2024-06-11

Production method: Use 4 diodes to make a bridge rectification, and add a 25V 1000UF capacitor. >>>More